• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1336-1341
• /
• 2013

Through reviewing the characteristics of digital TVs, which have emerged in CES since 2005, in the view of technology growth and substitution curves, this paper is to provide a prediction on the next generation's multi-media on smart environment. As a result, digital TV has been developed on the flow of its technology growth curve from the early version in 2005 to smart digital TV in 2013, which emphasizes the key word "connected", and it has already come to the market puberty.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1115-1120
• /
• 1992

The apparent negative crack growth phenomenon which usually arises in partial unloading compliance test is well known. The reason for apparent negative crack growth is the compressive residual stress caused by the plastic zone around the crack tip. The phenomenon as a possible source of error in determining $J_{JC}$ or J-R curve from partial unloading compliance experiments may be eliminated by the correction of compliance. A compliance correction equation is derived from a stress field analysis near the crack tip.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.87-100
• /
• 2002

Poorly-posed problems in the balanced discriminant analysis was considered. We restrict consideration to the case of observations and the number of variables are the same and small. When these problems exist, we do not use a maximum likelihood estimates(MLE) to estimate covariance matrices. Instead of MLE, an alternative estimate for the covariance matrices are proposed. This alternative method make good use of two regularization parameters, $\lambda$} and $\gamma$. A new test rule for the discriminant function is suggested and examined via limited hut informative simulation study. From the simulation study, it is shown that the suggested test rule gives better test result than other previously suggested method in terms of error rate criterion.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.115-121
• /
• 2012

Software failure time presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing. For data analysis of software reliability model, data scale tools of trend analysis are developed. The methods of trend analysis are arithmetic mean test and Laplace trend test. Trend analysis only offers information of outline content. In this paper, we discuss forecasting failure time case of failure time censoring. In this study, we predict the future failure time by using the curve regression analysis where the s-curve, growth, and Logistic model is used. The proposed prediction method analysis used failure time for the prediction of this model. Model selection using the coefficient of determination and the mean square error were presented for effective comparison.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1250-1253
• /
• 2014

The objective of this study was to estimate the parameters of Gompertz growth curves with the measurements of body conformation, real-time ultrasound longissimus dorsi muscle area (LMA) and backfat thickness (BFT) in Hanwoo cows. The Hanwoo cows (n = 3,373) were born in 97 Hanwoo commercial farms in the 17 cities or counties of Gyeongbuk province, Korea, between 2000 and 2007. A total of 5,504 ultrasound measurements were collected for the cows at the age of 13 to 165 months in 2007 and 2008. Wither height (HW), rump height (HR), the horizontal distance between the top of the hips (WH), and girth of chest (GC) were also measured. Analysis of variance was conducted to investigate variables affecting LMA and BFT. The effect of farm nested in location was included in the statistical model, as well as the effects of HW, HR, WH, and GC as covariates. All of the effects were significant in the analysis of variance for LMA and BFT (p<0.01), except for the HR effect for LMA. The two ultrasound measures and the four body conformation traits were fitted to a Gompertz growth curve function to estimate parameters. Upper asymptotic weights were estimated as $54.0cm^2$, 7.67 mm, 125.6 cm, 126.4 cm, 29.3 cm, and 184.1 cm, for LMA, BFT, HW, HR, WH, and GC, respectively. Results of ultrasound measurements showed that Hanwoo cows had smaller LMA and greater BFT than other western cattle breeds, suggesting that care must be taken to select for thick BFT rather than an increase of only beef yield. More ultrasound records per cow are needed to get accurate estimates of growth curve, which, thus, helps producers select animals with high accuracy.

• Quantitative Bio-Science
• /
• v.37 no.2
• /
• pp.125-132
• /
• 2018

In this study, noble strains of lactic acid bacteria were isolated and identified by genetic analysis of 16s rRNA. Also, pH-dependent growth curve, cholesterol assimilation ability and sugar production efficiency were measured. Lactic acid bacteria were identified to inhabit in the milks from various animals. Results of sequence analysis showed that there were differences in 16S rRNA sequence among strains and part of gene deletion was also recognized. Growth rates were varied, too, depending on the pH of the medium. Lactobacillus rhamnosus LOCK908 isolated from cow milk showed the highest growth rate and high cholesterol assimilation ability. Results of sugar fermentation tests were relatively consistent with the sequencing results. So, we propose newly isolated Lactobacillus rhamnosus LOCK908 as useful candidate for a starter of fermented beverage and probiotics. Results of this study will contribute to the isolation and identification of noble Lactic acid bacteria and to the public health.

• Food Science of Animal Resources
• /
• v.42 no.2
• /
• pp.252-265
• /
• 2022

Kocuria salsicia can survive in extreme environments and cause infections, including catheter-related bacteremia, in humans. Here, we investigated and evaluated the characteristics of nine K. salsicia strains (KS1-KS9) isolated from cheese brine from a farmstead cheese-manufacturing plant in Korea from June to December, 2020. Staphylococcus aureus American Type Culture Collection (ATCC) 29213 was used as a positive control in the growth curve analysis and biofilm-formation assays. All K. salsicia isolates showed growth at 15% salt concentration and temperatures of 15℃, 25℃, 30℃, 37℃, and 42℃. KS6 and KS8 showed growth at 5℃, suggesting that they are potential psychrotrophs. In the biofilm-formation analysis via crystal violet staining, KS6 exhibited the highest biofilm-forming ability at various temperatures and media [phosphate buffered saline, nutrient broth (NB), and NB containing 15% sodium chloride]. At 25℃ and 30℃, KS3, KS6, and KS8 showed higher biofilm-forming ability than S. aureus ATCC 29213. The antimicrobial resistance of the isolates was evaluated using the VITEK^® 2 system; most isolates were resistant to marbofloxacin and nitrofurantoin (both 9/9, 100%), followed by enrofloxacin (7/9, 77.8%). Five of the nine isolates (5/9, 55.6%) showed multidrug resistance. Our study reports the abilities of K. salsicia to grow in the presence of high salt concentrations and at relatively low temperatures, along with its multidrug resistance and tendency to form biofilms.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.39-45
• /
• 1974

The objects of this study are to induce the experimental equation suitable to estimate the height growing process, and to get some information that could be to reduce the error percent on determining the site index. The height growing process per sample plot were made up from the height age curve getted through the stem-analysis of the dominant tree. The 11 equations were calculated in the functional formulas between the age and the dominant height of Alnus hirsuta, Larix leptolepsis, L. Gmelini, P. koraiensis, Abies holophylla, P. rigida, Q. acutissima and Q. aliena. The suitable equation for estimating the guide curve were selected with the highest correlation and the low standard error with comparision on the age-height distributed map as Fig. 2. The suitable equation is different between the species as their calculated results as follows; The growing process of tree height are occasionally found to be polymorphous in the growth pattern as Fig. 3. By this result, the site index are practically found to be always not constant but shows variation to age in same plot as example 5. So, that the site index are estimated from the height-growth curve to age drawing by the stem-analysis or the polymorphic-curve, are concluded to be suitable on the study of site evaluation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.490-497
• /
• 1998

An elast-biscoplastic finite element analysis is performed to investigate detailed growth behavior of creep cracks and the numerical results are compared with experimental results. The results of mesh translation method are compared with those of node release method. Load line displancement curve obtained from the crack growth analysis by mesh translation shows the improved results than that obtained from the crack growth by node release method when the secondary creep rate is only used as creep material property. The results of accounting for primary creep rate and instantaneous plasticity shows a good agreement with the experimental result.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.10 no.1
• /
• pp.65-78
• /
• 1985

In this paper, the approach getting a total demand by forecasting the new demand and the replacement demand separately and adding them is used for long term forecasting of durable goods. Cross country analysis using the income as an independent variable and S-shaped growth curve as a fitting model is developed as a method of forecasting new demand. To get the replacement demand the methods using the number of ownership and the replacement rate and the methods using the past demand and the distribution of the product life are proposed. And the theoretical explannation for product life cycle's diversity, which is the one of the major considerations in the long term forecasting, is attempted by the combination of the new demand and the replacement demand patterns. This is applicated the long term forecasting of Korean passenger cars.