• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.60-66
• /
• 2002

The remote measurement system(RMS) as a new experimental method is limited in its application to crack measurement at elevated temperatures because of the oxide layer on the specimen surface. Since TiAIN and Cr coating layers have a high resistance to oxidation and wear, this paper proposed a TiAIN and Cr coating technique for specimens to facilitate the measurement of crack growth behavior using RMS. To investigate the effects of the coating layer, tension and fatigue tests were carried out at room temperature and at $538^{\circ}C$. The test material was 1Cr-1Mo-0.25V steel which is widely used as a turbine rotor material. From the experimental results, it was found that the mechanical properties of the TiAIN and Cr coated specimens were similar to those of the substrate. Accordingly, the TiAIN and Cr coated layer had hardly any influence on the fatigue crack propagation.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.7-11
• /
• 2001

In this study, specimens were classified four welded specimens and a base metal to investigate fatigue life and crack growth rate of pure titanium welding materials, and Ti was used in turbine equipment of nuclear power generation, etc. The summarized results are as follows; 1) Specimen-2 was bigger 712% than base metal, when it was compared with other welding materials, 2) As the result of specimens data, specimen-2 crack behavior rate res lower 30 times than base metal, and so total fracture life was very influenced by it, 3) Notch tip of Specimen-2 was offsetted 6.7mm from boundary H.A.Z, and if formed 25% in total fracture length, 4) As the considering of da/dN and $\Delta$K, Paris' law is incongruous in this study, because fro inclines nsf on one date.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.115-123
• /
• 1994

Under variable amplitude loading conditions, retardation or accelerated condition of fatigue crack growth occurs with every cycle, Because fatigue crack growth behavior varied depend on load time history. The modeling of stress amplitude with storm loading acted to ships and offshore structures applied this paper. The crack closure behavior examine by recording the variation in load-strain relationship. By taking process mentioned above, fatigue crack growth rate, crack length, stress intensity factor, and crack closure stress intensity factor were obtained from the stress cycles of each type of storm ; A(6m), B(7m), C(8m), D(9m), E(11m) and F(15m) which was wave height. It showed that the good agreement with between the experiment results and simulation of storm loads. So this estimated method of crack propagtion rate gives a good criterion for the safe design of vessels and marine structure.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.11-18
• /
• 2002

We proposed a new experimental method which is required to easily observe the growth behavior of fatigue cracks. In the proposed method, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using an image processing software which was developed by authors. By comparing the data measured by the image processing system with those by the manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

To investigate the characteristics of water droplet on the gas diffusion layer from both upper-view and side-view of flow channel, a rig test apparatus was designed and fabricated with L-shape acryl plate in a $1mm{\times}1mm$ micro-channel. This experimental device is used to simulate the single droplet growth and its transport process under fuel cell operating condition. As a first step, we investigated the growth and transport of single water droplet with working temperature and air flow velocity. The contact angle and its hysteresis of water droplet at departing moment are measured and analyzed. It is expected that this study can provide the basic understanding of liquid water droplet behavior in gas flow channel and GDL interface during the PEM fuel cell operation.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.3
• /
• pp.75-81
• /
• 2011

Growth behaviors of iron-nitride on S45C steels at low pressure gas nitriding were examined. Surfaces of the steels covered with fine and porous oxide during the pre-oxidation using $N_2O$ gas. Well faceted particles connected with them were observed after 1 min nitriding. They grew steadily and filled inter-pores during additional nitriding process. From the X-ray diffraction analysis, ${\gamma}'$-iron nitride was dominantly formed at the initial stage but the amount of ${\varepsilon}$-iron nitride was rapidly increased as nitriding treatment time. The porous layer was formed on the particles and thickened up to half of nitride layer after 60 min nitriding. The observed growth behaviors were discussed in internal stress related with volume expansion involved in transforming from iron to iron-nitrides.

• Child Health Nursing Research
• /
• v.8 no.4
• /
• pp.414-421
• /
• 2002

The purpose of this study is to analyze the concept of caretaking behavior for children. This study adopts the methode of Walker and Avant in analysis. Based on the results of the study, the attributes, precedents, and consequences of caretaking behavior for children are follows ; 1. The affirmative attributes of caretaking behavior are affection binding, nutritional guidance, education, caring, protection moral training and acquisition of parents' role. The negative attributes of caretaking behavior are inconsistent moral training, incapability of affection binding and overprotection. 2. The precedent of caretaking behavior are postpartum contact with their babies, cognizance capacity of child-caretaking, economic support, level of preparation for child-caretaking and self-consciousness as parents. 3. The affirmative consequences of caretaking behavior are promotion of child growth and development, formation of maternal-infantile attachment, development of children sociality, satisfaction of parental role and reinforcement of relationship between the members of family. The negative consequences of caretaking behavior are burden and conflict to parental role, children's illness, role conflict and role stress among the members of the family and family breaking up.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.115-121
• /
• 2012

Sapphire single crystals have been highlighted for epitaxial gallium nitride films in high-power laser and light emitting diode (LED) industries. Among the many crystal growth methods, the Kyropoulos process is an excellent commercial method for growing larger, high-optical-quality sapphire crystals with fewer defects. Because the properties and growth behavior of sapphire crystals are influenced largely by the temperature distribution and convection of molten sapphire during the manufacturing process, accurate predictions of the thermal fields and melt flow behavior are essential to design and optimize the Kyropoulos crystal growth process. In this study, computational fluid dynamic simulations were performed to examine the effects of the crucible geometry aspect ratio on melt convection during Kyropoulos sapphire crystal growth. The results through the evolution of various growth parameters on the temperature and velocity fields and convexity of the crystallization interface based on finite volume element simulations show that lower aspect ratio of the crucible geometry can be helpful for the quality of sapphire single crystal.

• Health Policy and Management
• /
• v.24 no.2
• /
• pp.191-202
• /
• 2014

Background: The organizational citizenship behavior is generally known as the important factor relevant to the organizational effectiveness. This research examined the mediating effect of the organizational citizenship behavior of hospital employees on the organizational effectiveness. Methods: Data were collected from 1,112 employees located in city of Seoul, Kyunggi and Chungnam province through self-administered questionnaires. Collected data were analyzed using IBM SPSS ver. 20.0, frequency analysis, t-test, analysis of variance, regression analysis, and path analysis. The main findings of the study are as follows. Results: First, it was found that many characteristics variables of personality, job, and relationship together affected organizational citizenship behavior of hospital employees. Especially, the following variables of negative affectivity, desire for growth, job value, job significance, and job security were found to have significant effect on the organizational citizenship behavior of hospital employees. Second, the results of path analysis showed that, through the mediating effect of organizational citizenship behavior, personality variables of positive and negative affectivity, and desire for growth, job characteristics variables of job value, job significance, and job security, and relationship variables of organizational support and task interdependence, had significant total effects on the level of job satisfaction of hospital employees. Conclusion: As a result, the organizational citizenship behavior seems to have both direct and indirect effects on the organizational effectiveness of hospital employees. Based on above findings, some theoretical and practical implications were discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.558-562
• /
• 1999

For 6H-SiC crystals which was obtained by sublimation growth, the formation of micropipes and internal planar defects was discussed in consideration of the inter-relationship between mass adsorption behavior and the defects origin on the growth interface on the basis of KSV theory and the the step growth pattern on the vicinal plane. Micropipes and planar defects was formed in the region which the step could not be grown by impurities impinging. It was realized that the internal defects formation was related to the crystallographic step planes formed on the growth interface and the migration of the molecules adsorbed on it.