• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.1
• /
• pp.37-43
• /
• 2001

Crop status monitoring and yield prediction at higher spatial resolution is a valuable tool in various decision making processes including agricultural policy making by the national and local governments. A prototype crop forecasting system was developed to project the size of rice crop across geographic areas nationwide, based on daily weather pattern. The system consists of crop models and the input data for 1,455 cultivation zone units (the smallest administrative unit of local government in South Korea called "Myun") making up the coterminous South Korea. CERES-rice, a rice crop growth simulation model, was tuned to have genetic characteristics pertinent to domestic cultivars. Daily maximum/minimum temperature, solar radiation, and precipitation surface on 1km by 1km grid spacing were prepared by a spatial interpolation of 63 point observations from the Korea Meteorological Administration network. Spatial mean weather data were derived for each Myun and transformed to the model input format. Soil characteristics and management information at each Myun were available from the Rural Development Administration. The system was applied to the forecasting of national rice production for the recent 3 years (1997 to 1999). The model was run with the past weather data as of September 15 each year, which is about a month earlier than the actual harvest date. Simulated yields of 1,455 Myuns were grouped into 162 counties by acreage-weighted summation to enable the validation, since the official production statistics from the Ministry of Agriculture and Forestry is on the county basis. Forecast yields were less sensitive to the changes in annual climate than the reported yields and there was a relatively weak correlation between the forecast and the reported yields. However, the projected size of rice crop at each county, which was obtained by multiplication of the mean yield with the acreage, was close to the reported production with the $r^2$ values higher than 0.97 in all three years.

• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.94-101
• /
• 2001

This study was intended to evaluate the relationship environmental condition and growth characteristics of seed treatment seed in direct sowing with different sowing date, and to suggest new cultivation model. The emergence percentage and hours were down as the delayed sowing date. Optimum sowing time was Sep. 10, and sowing must end before Sep. 20 for safety yield. When did sowing ended before Sep.20 in direct sowing cultivation, the seedling growth(SG) and No of roots of direct sowing seedling were larger than transplanting cultivation . At March 8 evaluated seedling, the SG of direct sowing seedling was higher than transplanting, and at Sep. 2(1 those were similar. The missing plant rate in transplanting cultivation was under 3 %, and that in direct sowing cultivation was about 13∼18%, and the extent were sever as delayed sowing date. The bulb fresh weight was decreased as delayed sowing, and those in direct sowing and transplanting cultivation were 230, 217g, respectively. The blot rate was high in direct sowing cultivation, and that was decreased as delayed sowing. The yield in direct sowing and transplanting cultivation were 5,134, 5,300kg, respectively, and those were decreased as delayed sowing. The average yield in early and medium-late maturity cultivars were 3,750, 4,908kg, respectively, and Sonic was highest yield in early maturity cultivars and Nongwoodego was highest in medium-late maturity cultivars. The emergence weed were 9 species as Loportea bulbifera Weddell and others, and Loported bulbifera Weddell, Digitaria violascens Link and Persicaria longiseta Kitagawa were dominant species in direct sowing cultivation with black hole vinyl mulching

• Carbon letters
• /
• v.28
• /
• pp.72-80
• /
• 2018

In this study, an empirical relationship between the energy band gap of multi-walled carbon nanotubes (MWCNTs) and synthesis parameters in a chemical vapor deposition (CVD) reactor using factorial design of experiment was established. A bimetallic (Fe-Ni) catalyst supported on $CaCO_3$ was synthesized via wet impregnation technique and used for MWCNT growth. The effects of synthesis parameters such as temperature, time, acetylene flow rate, and argon carrier gas flow rate on the MWCNTs energy gap, yield, and aspect ratio were investigated. The as-prepared supported bimetallic catalyst and the MWCNTs were characterized for their morphologies, microstructures, elemental composition, thermal profiles and surface areas by high-resolution scanning electron microscope, high resolution transmission electron microscope, energy dispersive X-ray spectroscopy, thermal gravimetry analysis and Brunauer-Emmett-Teller. A regression model was developed to establish the relationship between band gap energy, MWCNTs yield and aspect ratio. The results revealed that the optimum conditions to obtain high yield and quality MWCNTs of 159.9% were: temperature ($700^{\circ}C$), time (55 min), argon flow rate ($230.37mL\;min^{-1}$) and acetylene flow rate ($150mL\;min^{-1}$) respectively. The developed regression models demonstrated that the estimated values for the three response variables; energy gap, yield and aspect ratio, were 0.246 eV, 557.64 and 0.82. The regression models showed that the energy band gap, yield, and aspect ratio of the MWCNTs were largely influenced by the synthesis parameters and can be controlled in a CVD reactor.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.18-28
• /
• 2013

It was compared the estimated parameters by the surplus production from three different models, i.e., three types (Schaefer, Gulland, and Schnute) of the traditional surplus production models, a stock production model incorporating covariates (ASPIC) model and a maximum entropy (ME) model. We also evaluated the performance of models in the estimation of their parameters. The maximum sustainable yield (MSY) of small yellow croaker (Pseudosciaena polyactis) in Korean waters ranged from 35,061 metric tons (mt) by Gulland model to 44,844mt by ME model, and fishing effort at MSY ($f_{MSY}$) ranged from 262,188hauls by Schnute model to 355,200hauls by ME model. The lowest root mean square error (RMSE) for small yellow croaker was obtained from the Gulland surplus production model, while the highest RMSE was from Schnute model. However, the highest coefficient of determination ($R^2$) was from the ME model, but the ASPIC model yielded the lowest coefficient. On the other hand, the MSY of Kapenta (Limnothrissa miodon) ranged from 16,880 mt by ASPIC model to 25,373mt by ME model, and $f_{MSY}$, from 94,580hauls by ASPIC model to 225,490hauls by Schnute model. In this case, both the lowest root mean square error (RMSE) and the highest coefficient of determination ($R^2$) were obtained from the ME model, which showed relatively better fits of data to the model, indicating that the ME model is statistically more stable and robust than other models. Moreover, the ME model could provide additional ecologically useful parameters such as, biomass at MSY ($B_{MSY}$), carrying capacity of the population (K), catchability coefficient (q) and the intrinsic rate of population growth (r).

• Journal of Crop Science and Biotechnology
• /
• v.11 no.3
• /
• pp.215-222
• /
• 2008

Multilocation trials on 36 rice(Oryza sativa) genotypes of 3 different maturity groups were conducted at four different locations of Orissa for 3 years and 30 ragi(Eleusine coracana) genotypes of 2 different maturity groups were evaluated in three environmental conditions for 3 years. Grain yield data were subjected to stability analysis following linear regression model to estimate adaptability and stability parameters, i.e. b, and $S^2d$ Stability of performance of genotypes was also estimated by two other stability parameters viz., ecovalence W and AMMI stability value ASV. The rice and ragi genotypes of different duration groups showed wide variation in their mean yield, b, $S^2d$, W and ASV parameters. Seeds of the 36 rice and 30 ragi genotypes were treated with 500 and 100 ppm aqueous solution of maleic hydrazide(MH) for 24 hours, respectively to study MH-sensitivity. Sensitivity of genotypes to MH treatment was estimated in terms of seedling growth inhibition index(SGI). The rice and ragi genotypes showed wide differences in their MH-sensitivity in terms of SGI. Relationship of MH-sensitivity of genotypes with their yielding ability, adaptability and stability of performance was tested by contingency $x^2$ test. Low sensitivity of rice and ragi genotypes to MH in terms of SGI appeared to be good indicators of high yielding ability of genotypes. Also, low and high MH-sensitivity of genotypes would be a good indicator of better adaptability to rich and poor environments, respectively, in ragi but not in rice. Low MH-sensitivity of genotypes could be the good indicator of stability of yield performance in rice but not in ragi.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.577-584
• /
• 2003

A crack with growth in ferroelectric ceramics under purely electric loading is analyzed. The crack tip stress intensity factor for the growing crack under small-scale conditions is evaluated by employing the model of nonlinear domain switching. The crack tip stress intensity factor increases or decreases with crack growth, depending on the electrical nonlinear behavior and the direction of an applied electric field. It is shown that the ferroelectric material can be either toughened or weakened as the crack grows. The steady state crack growth in ferroelectric ceramics is also discussed.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.66-80
• /
• 1997

Pinus koraiensis is one of the major speciese which have been recently planted for ten years and consists of 31% of total plantation. Presently young stand less than 30 years consists of 87% of total forest, but tending thinning of it is hardly carried out and the desirable direction for the thinning is not established yet. The objective of the study is to introduce the optimum thinning plan and thinning method through the long-run experiment of tending thinning for the Pinus koraiensis stand. The experiments carry out to interprete its growth model on the subject of two thinning experimental plots and yield table of Pinus koraiensis. As the basic step for understanding the thinning process, a theoretical growth model which is suitable to express the growth process is required. For that purpose, three growth functions (Mitscherlich, 4 parameter Richards, 3 parameter Richards) are applied to the diameter growth of the sample trees which are taken in the two plots. The results show that 3 parameter Richards is the most suitable. It is also verified that the diameter growth, the height growth, and the decrease in the number of stocks can be estimated by this function. To estimate the growth change of single tree, growth model including parameter h which is related to the occupation area of single tree are introduced. The parameter h can be estimated by using the data of the diameter growth obtained from the established experimental plots. Therefore, if both verification and modification of the usefulness of the model suggested is made, equations which tell about the thinning effects could be drived by estimating the growth process of single tree in advance.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.361-367
• /
• 2020

Researching the influence and role of CEO overconfidence to dividend policy is important for stock market investors. Therefore, this study was conducted to find out the relationship between CEO overconfidence and dividend policy in industrial enterprises in Vietnam. Data collected from 222 industry enterprises listed on the Vietnam Stock Exchange from 2012 to 2018. Data is collected on financial statements of listed companies. GLS model with panel data is used to analyze regression results. The results show that CEO overconfidence has dividend yield higher than CEO non-overconfidence. At the same time, the dividend payout ratio of enterprises has no difference between CEO overconfidence and CEO non-overconfidence. The results also showed that revenue growth has a positive impact on dividend yield in small enterprises, but negative impact on dividend payout in large enterprises. Research results by firm size have similar results with the general analysis for all enterprises. At the same time, the analysis of ownership type shows that CEO overconfidence has a positive impact on dividend yield of non-state enterprises without affecting other types of enterprises. From these results, the authors also made a number of recommendations to help investors choose businesses to invest in accordance with their strategies.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.259-265
• /
• 1989

In a batch fermentation process using carrot cell suspension culture, the effect of initial concentration of limiting nutrients(glucose and phosphate) on the specific growth rate and cell yield was investigated. The period of exponential growth is about 2 days and the consumption of glucose and phosphate in culture medium was very small when the initial concentrations of glucose and phosphate are 1.49g/1 ~ 3.01g/l and 0.08 ~ 0.32mM respectively. The specific growth rate of cells ranged from TEX>$0.15\;day^{-1}$ to $0.3\;day^{-1}$ irregularly. And the ratio of the initial concentration of glucose to phosphate did not affect the specific growth rate and the cell yield. The increase on cells had linear relationship with the consumption of limiting nutrients. Therefore, the increase of cells was found to be more influenced by the concentration of glucose than that of phosphate.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.46-46
• /
• 2017

We developed a rice simulation model for remote-sensing (SIMRIW-RS, Homma et al., 2007) to evaluate rice production and management on a regional scale. Here, we reports its application trial to estimate rice production in farmers' fields in Sendai, Japan. The remote-sensing data for the application was periodically obtained by multispectral camera (RGB + NIR and RedEdge) attached with unmanned air vehicle (UAV). The airborne images was 8 cm in resolution which was attained by the flight at an altitude of 115 m. The remote-sensing data was relatively corresponded with leaf area index (LAI) of rice and its spatial and temporal variation, although the correspondences had some errors due to locational inaccuracy. Calibration of the simulation model depended on the first two remote-sensing data (obtained around one month after transplanting and panicle initiation) well predicted rice growth evaluated by the third remote-sensing data. The parameters obtained through the calibration may reflect soil fertility, and will be utilized for nutritional management. Although estimation accuracy has still needed to be improved, the rice yield was also well estimated. These results recommended further data accumulation and more accurate locational identification to improve the estimation accuracy.