• Water for future
• /
• v.5 no.2
• /
• pp.6-16
• /
• 1972

It has been well studied and known that the yields from the rice fields irrigated by the cold water such as the water directly flowing in from mountain valleies, underground water and subground water are largely influenced by the water temperature. However, the best method of raising water temperature has not yet been established. This is because there are some essentially difficult problems associated. When we examine the effects of $1^{\circ}C$ rise in the water temperature under natural condition on rice growing, the necessity of this line of study is verified. The results of Mihara's study show that rice bears its fruits at the water temperature above $19^{\circ}C$ and the difference of $1^{\circ}C$ in the range of $19^{\circ}C$ to $22^{\circ}C$ can produce the 20% of difference in yields. Because of these facts, most farmers have made use of water temperature raising ponds, zigzag waterways and shelter belts. But the most important factor in raising water temperature has been found to be the heat loss due to evaporation. Recently, a good deal of experiment on raising water temperature and soil temperature by reducing the evaporation are being carried out all over the world. The reduction of evaporation does not only reduce heat loss, from the surface but also reduce the loss of water. Present study is aimed to determine the efficiency of different chemicals by which monomolecular films are formed over different surfaces such as water surface, soil surface and the surface of plant leaves with a purpose of preventing the transpiration, and aimed to observe the effects of the temperature rise and its influence on growing state as well as the durability of the plants under drought condition.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.42-48
• /
• 1993

KTP(KTiOPO4) single crystals were grown by the TSSG(top seeded solution growth) method using the Ksp401s flux. A heat-pipe based growing furnace was used, and the temperature stability and the homogenity of the growing solution in the platinum crucible were within the level of It 0.5℃ and ±0.9℃, respectively. The effects of some operating variables such as operating temperature range, initial cooling rate, forced stirring, reuse of the flux were investigated. As the initial cooling rate was decreased to the degree of 0.1℃/hr and some proper stirring effect by the crystal rotation was introduced to the present experimental condition, bigger and better crystals without inclusion grew. A single crystal with the maximum sixte of 44 ×39 ×17mm3 was obtained and showed the SHG conversion efficiency of 21.39) even without the anti-refilection coating.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.10 no.1
• /
• pp.65-68
• /
• 2005

Growth and development of a plant over a growing season is closely related to the daily accumulation of heat. Heat unit measured by accumulated growing degree days (GDD) is becoming increasingly popular to estimate the growth of a plant or even in insect. GDD or heat accumulation per day is measured by calculating average daily temperature and then subtracting the base temperature below which growth does not occur. Heat accumulation per day is added for the desired period and accumulated GDD is determined. The present study was conducted in five seasons in an established garden with K-2, S-36 and V-1 mulberry varieties belonging to Morus indica L. grown under completely irrigated condition at the farm of CSRTI, Mysore during 2001 - 2002. Plants were pruned in each season and the growth of the plant measured by total shoot length and fresh leaf yield was recorded at an interval of 5 days starting from 30 days of pruning (DAP) to 70 days when all the plants were pruned. The accumulated GDD for the corresponding days were recorded and used for analysis. Accumulated growing degree days (GDD) have been found to be perfectly correlated with both growth and yield in all the seasons in all the varieties studied. The high $R^2$ values indicated a strong relationship between the accumulated GDD and, growth and yield of mulberry.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.230-246
• /
• 2023

Objectives: The climate crisis has arrived and heat-related illnesses are increasing. It is necessary to discover new high-heat risk industries and understand the environment . It is also necessary to prioritize risks of industries that have not been included in the management target to date. The study was intended to monitor and evaluate the thermal risk of high-priority workplaces. Methods: A prioritization method was developed based on five factors: occurrence of and death due to heat-related illnesses, work environment monitoring, indoor work rate, small heat source, and limited heat dissipation. it, was applied to industrial accidents caused by heat-related illnesses. Wet bulb temperature index and apparent temperature were measured in July and August at 24 workplaces in seven industries and assessed for thermal risk. Results: The wet bulb temperature index was in the range of 23.8~31.9℃, and exposure limits were exceeded in the growing of crops, food services activities and accommodation, and building construction. The apparent temperature was in the range of 26.8~36.7℃, and exceeded the temperature standard for issuing heatwave warnings in growing of crops, food services activities and accommodation, warehousing, welding, and building construction. Both temperature index in growing of crops and building construction were higher than the outside air temperature. Conclusions: In the workplace, risks in industries that have not be controlled and recognized through existing systems was identified. it is necessary to provide break times according to the work-rest time ratio required during dangerous time period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.783-787
• /
• 1999

To study the effects of different extrusion conditions of barley on growth performance, nutrient digestibility and nutrient excretion in feces, a total of 150 growing pigs ($Landrace{\times}Duroc{\times}Large$ White; average 24.4 kg body weight) were allotted to five treatments, in a completely randomized block design. The experimental diets were based on corn-soybean and 30% of barley was included in each diet; barley was the only extruded ingredient. The treatments were 1) no extrusion (Control); 2) extrusion at $100^{\circ}C$ without preconditioning (ENLT); 3) extrusion at $150^{\circ}C$ without preconditioning (ENHT); 4) extrusion at $100^{\circ}C$ with preconditioning (ECLT); 5) extrusion at $150^{\circ}C$ with preconditioning (ECHT). Temperature in the barrel was controlled within ${\pm}5^{\circ}C$ by feed rate with the addition of water at the rate of $3{\ell}\;per\;min$. in the extruder for each treatment. For the 6 week experimental period, extrusion of barley improved the average daily gain (ADG) and digestibilities of dry matter, crude protein and gross energy in growing pigs. As compared to control, significant improvements in ADG (p<0.05) were shown in the groups of feeding extruded barley at high temperature (ENHT and ECHT). There were also significant differences in the digestibilities of DM, CP and P between extrusion temperatures. Barley extruded at high temperature gave better digestibilities of DM, CP and GE than barley extruded at low temperature. Extruded barley diet groups showed significantly (p<0.05) lower excretions of DM, nitrogen (N) and P per kg gain as compared to the ground barley group. DM, N and P excretion per kg gain were also significantly lower in pigs fed barley extruded at $150^{\circ}C$ than at $100^{\circ}C$. In conclusion, extrusion considerably improved the nutritive value of barley and it appeared that temperature is the most important variable.

• Journal of Animal Environmental Science
• /
• v.11 no.2
• /
• pp.103-110
• /
• 2005

The study was carried out to develop the real time measuring technique of ammonia and carbon dioxide concentration emitted from growing-finishing pig house in winter and estimate ammonia emission rate emitted from the pig house. As the study was carried out, environmental management technique for the pig house and odor abatement skill could be properly developed to reduce the residence's annoyance. The room temperature of the growing-finishing pig house was $10^{\circ}C$ higher than outdoor air temperature in spite of additional heating, because of heat emitted from body temperature of the pigs. The daily variation pattern of room temperature in the pig house shows the similar tendency with outdoor air temperature. The daily mean ventilation rate per head was $16\;m^3/h$ and ranged from $12\;m^3/h$ to $22.4\;m^3/h$. The difference of day and night for ventilation rate was about 2 times. The ammonia emission rate was $208{\pm}28\;mg/h{\cdot}pig$ per daily basics calculated with ventilation rate and ammonia concentration.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.145-150
• /
• 1998

ZnGa2O4 thin film phosphors were deposited on Si(100) (111) wafers by rf magnetron sputtering. The ef-fects of substrates and deposition parameters on the growing mechanisms were studied. As a results of the effect of substrate temperature tranistions of growth orientation and different growing behaviors were ob-served. Also polycrystalline ZnGa2O4 thin film could not be achieved without oxygen gas. PL spectrum of ZnGa2O4 thin films were analyzed and showed broad band luminescence spectrum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.277-277
• /
• 2010

In this report, we present a very effective growing method of graphene using plasma enhanced chemical vapor deposition(PECVD). The graphene is successfully grown on copper substrate. Low temperature growing is obtained with methane and hydrogen plasma. The graphene layers are analyzed by Raman spectroscopy and atomic force microscope. We also provide a transfer technique of graphene layer onto silicon substrate to build up various kinds of application devices.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.127-132
• /
• 1996

We measured photoreflectance spectrum characteristics of InGaAs grown by MBE method on semi-insulating GaAs. The PR signal splitting of substate and epilayer was observed. The band gap energy was about 1.40 eV. It make to 8 meV difference when it is fitted by Pan's equation. The reason is stress on the interface, which is due to lattice mismatch between epilayer and substate . We became to know that reason influence crystalline on growing sample. In InGaAs epilayer, temperature dependency is low. The efficiency of photo absorption is high and activate over 200K. In this case when it is annealed at $400^{\circ}C$ below growing temperature, PR signal splitting is remarkable and crystalline is inhanced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.245-248
• /
• 2012

In this paper, the optimized growing conditions of PZT thin films on low temperature co-fired ceramics (LTCC) substrates are studied. The LTCC technology is an emerging one in the fields of mesoscale (from 10 um to several hundred um) sensor and actuator against silicon based technology due to low cost, high yield, easy manufacturing of 3 dimensional structure, etc. The LTCC substrates with thickness of 400 um are fabricated by laminating 100 um green sheets using commercial power (NEG, MLS 22C). The Pt/Ti bottom electrodes are deposited on the LTCC substrates, then the growing conditions of PZT thin films using rf magnetron sputtering method are studied. The growing conditions are tested under various rf power and gas ratio of oxygen to argon. And the crystallization and ingredient of PZT films are analyzed by X-ray diffraction method (XRD) and energy dispersive spectroscopy (EDS). The optimized growing conditions of PZT thin films are rf power of 125W, Ar/O2 gas ratio of 15:5.