• 제목/요약/키워드: groundwater sources

검색결과 238건 처리시간 0.025초

수환경 내 용존성 유기물질의 총 유기탄소 및 총 질소 안정동위원소 신규 분석법 소개 (Introduction of a New Method for Total Organic Carbon and Total Nitrogen Stable Isotope Analysis of Dissolved Organic Matter in Aquatic Environments)

  • 박시영;최희주;홍서연;임보라;최서영;김은미;허유정;이수형;김민섭
    • 생태와환경
    • /
    • 제56권4호
    • /
    • pp.339-347
    • /
    • 2023
  • 본 연구는 TOC/TN-IRMS를 이용하여 총 유기탄소 및 총 질소 안정동위원소 분석법을 연구하였으며, 수환경 중저농도 시료에서도 분석이 가능하게 시스템을 구축하였다. 수생태계로 유입되는 다양한 유기탄소 기원을 파악하기 위하여 형광지표와 δ13C-DOC 안정동위원소비를 활용한다면 효율적인 수질 관리를 위한 해석기능을 제공할 것이며, 추후 유역 오염원의 대표값(end member)의 지속적인 조사를 통하여 자료구축이 이루어져야 할 것이다.

CHANGES IN WATER USE AND MANAGEMENT OVER TIME AND SIGNIFICANCE FOR AUSTRALIA AND SOUTH-EAST ASIA

  • Knight, Michael J.
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 1997년도 추계 국제학술심포지움 논문집
    • /
    • pp.3-31
    • /
    • 1997
  • Water has always played a significant role in the lives of people. In urbanised Rome, with its million people. sophisticated supply systems developed and then fled with the empire. only to be rediscovered later But it was the industrial Revolution commencing in the eighteenth century that ushered in major paradigm shifts In use and altitudes towards water. Rapid and concentrated urbanisation brought problems of expanded demands for drinking supplies, waste management and disease. The strategy of using water from local streams, springs and village wells collapsed under the onslaughts of rising urban demands and pollution due to poor waste disposal practices. Expanding travel (railways. and steamships) aided the spread of disease. In England. public health crises peaks, related to water-borne typhoid and the three major cholera outbreaks occurred in the late eighteenth and early nineteenth century respectively. Technological, engineering and institutional responses were successful in solving the public health problem. it is generally accepted that the putting of water into pipe networks both for a clean drinking supply, as well as using it as a transport medium for removal of human and other wastes, played a significant role in towering death rates due to waterborne diseases such as cholera and typhoid towards the end of the nineteenth century. Today, similar principles apply. A recent World Bank report Indicates that there can be upto 76% reduction in illness when major water and sanitation improvements occur in developing countries. Water management, technology and thinking in Australia were relatively stable in the twentieth century up to the mid to late 1970s. Groundwater sources were investigated and developed for towns and agriculture. Dams were built, and pipe networks extended both for supply and waste water management. The management paradigms in Australia were essentially extensions of European strategies with the minor adaptions due to climate and hydrogeology. During the 1970s and 1980s in Australia, it was realised increasingly that a knowledge of groundwater and hydrogeological processes were critical to pollution prevention, the development of sound waste management and the problems of salinity. Many millions of dollars have been both saved and generated as a consequence. This is especially in relation to domestic waste management and the disposal of aluminium refinery waste in New South Wales. Major institutional changes in public sector water management are occurring in Australia. Upheveals and change have now reached ail states in Australia with various approaches being followed. Market thinking, corporatisation, privatisation, internationalisation, downsizing and environmental pressures are all playing their role in this paradigm shift. One casualty of this turmoil is the progressive erosion of the public sector skillbase and this may become a serious issue should a public health crisis occur such as a water borne disease. Such crises have arisen over recent times. A complete rethink of the urban water cycle is going on right now in Australia both at the State and Federal level. We are on the threshold of significant change in how we use and manage water, both as a supply and a waste transporter in Urban environments especially. Substantial replacement of the pipe system will be needed in 25 to 30 years time and this will cost billions of dollars. The competition for water between imgation needs and environmental requirements in Australia and overseas will continue to be an issue in rural areas. This will be especially heightened by the rising demand for irrigation produced food as the world's population grows. Rapid urbanisation and industrialisation in the emerging S.E Asian countries are currently producing considerable demands for water management skills and Infrastructure development. This trend e expected to grow. There are also severe water shortages in the Middle East to such an extent that wars may be fought over water issues. Environmental public health crises and shortages will help drive the trends.

  • PDF

폐금속 광산의 유형별 오염특성에 관한 연구 (Study on the Contamination Characteristics of Pollutants at Various type of Abandoned Metal Mines)

  • 이종득;김태동;김선구;김휘중
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제18권3호
    • /
    • pp.93-108
    • /
    • 2013
  • This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.

프로판 및 부탄 이용 미생물에 의한 휘발유 첨가제 MTBE의 동시분해 (Cometabolic Biodegradation of Fuel Additive Methyl tert-Butyl Ether(MTBE) by Propane- and Butane-Oxidizing Microorganisms)

  • 장순웅
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제8권4호
    • /
    • pp.45-52
    • /
    • 2003
  • 국내유류오염지역 토양에서 propane과 butane을 탄소원으로 이용하여 분리된 Nocardia SW3를 대상으로 가스기질농도, 온도, pH 변화에 따른 영향, 그리고 MTBE 공대사 분해 특성을 조사하였다. 초기농도변화에 따른 기질분해속도를 비교하면 propane 및 butane이 70$\mu$㏖일때 각각 30.6, 25.4(n㏖/min/mg protein)으로 관찰되어 빠른 기질이용율을 보여주었으며, 최적온도 및 pH조건은 $30^{\circ}C$, 7이었으며, 실험조건인 온도 $15^{\circ}C$$35^{\circ}C$. pH 5∼8 범위내에서 약간의 차이는 있지만 전반적으로 propane과 butane이 효율적으로 이용되었다. Nocardia SW3를 대상으로 propane 및 butane이 탄소원으로 이용될 때 MTBE분해특성을 비교ㆍ평가한 결과, propane 및 butane의 MTBE 분해 활성도는 유사하였으며, 가스기질이 탄소원으로 이용시 MTB표의 분해량을 나타내는 transformation yield($T_y$)는 propane과 butane의 경우 각각 46.7, 35.0(n㏖ MTBE degraded $\mu$㏖ substrate utilized), transformation capacity($T_c$)는 실험 결과 각각 320, 280(n㏖ MTBE degraded/mg biomass used)로 나타났다. 또한 MTBE 부산물로 TBA가 검출되었으며, TBA의 지속적인 분해를 관찰하였다.

영가철($Fe^0$)을 이용한 퇴적물내 Atrazine의 탈염소화 (Dechlorination of Atrazine in Sediment Using Zero Valent Iron)

  • 김건하;정우혁;최승희
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권4호
    • /
    • pp.33-40
    • /
    • 2006
  • 농경지에서 부유물질과 결합하여 비점원형태로 발생하는 잔류농약은 하류에 퇴적물로 침전되어 지표수를 오염시킬 수 있다. 이 연구는 트리아진계 제초제인 아트라진이 퇴적물에 포함되어 있는 경우 0가철(Zero-valent Iron, ZVI)을 이용한 탈염소화 반응 속도를 측정하였다. 실험결과 퇴적물의 완충능이 pH를 중성으로 유지시킴으로서 탈염소 반응이 지속됨을 알 수 있었다. 퇴적물에 아트라진을 10, 30, 50 mg Atrazine/L of total sediment로 오염시키고 0가철을 투여하여 아트라진의 농도변화를 측정함으로서 탈염소화 속도를 추정하였다. 탈염소화 속도는 아트라진 초기농도 10 mg/L인 경우 $1.38x10^{-1}/d$, 30 mg/L인 경우 $1.29x10^{-l}/d$, 50 mg/L인 경우 $7.43x10^{-2}/d$이었으며, 초기농도가 50 mg/L이고 영가철을 투입하지 않은 경우 속도상수는 $3.05x10^{-2}/d이었다. 영가철에 의한 아트라진 농도 반감기는 초기 농도 10 mg/L일때 5.03 d, 30 mg/L일때 5.38 d, 50 mg/L일때 9.33 d이었으며, 초기농도가 50 mg/L이고 영가철을 투입하지 않을 경우 22.73 d로 나타났다.

Low Temperature Thermal Desorption (LTTD) Treatment of Contaminated Soil

  • Alistair Montgomery;Joo, Wan-Ho;Shin, Won-Sik
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 추계학술발표회
    • /
    • pp.44-52
    • /
    • 2002
  • Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

  • PDF

제주도 용천수의 수리화학적 특성 (Hydrochemical Characteristics of Spring Water in Cheju Island)

  • 윤정수;박상운
    • 대한지하수환경학회지
    • /
    • 제5권2호
    • /
    • pp.66-79
    • /
    • 1998
  • 본 연구는 제주도 백록담 담수호에서 해안변 용천수에 이르는 고도별로 대표적인 55개 용천수에 대한 지역적 수질특성과 그 진화과정을 연구하였다. 조사지역 55개 용천수의 수질분석 결과 관음사물은 수소이온농도에서, 유수암천, 장수물, 덕지샘물, 신촌큰물, 영천사, 운량천, 하원통물, 동해물, 색달생수, 안덕계곡, 화순곤물, 돗물, 화강물, 정금물은 주변 육상오염원들에 의해서, 삼양제3수원, 신촌큰물, 명법사, 서느렁물, 토산물, 정금물, 곽지물, 애월하물, 고내물, 녹고물은 해수침입에 의해 오염이 진행중인 용천수들로 분류되었다. 용천수내의 전기전도도, pH, 질산성질소, 중탄산이온은 강수량이 많았을 때 그 농도가 증가하였으며, 나트륨, 염소이온, 황산이온은 강수량이 많았을 때 그 농도가 감소하였고, 칼륨과 마그네슘, 칼슘은 영향이 미미하였다. Piper의 삼각다이어그램을 통한 조사지역 용천수의 수질특성을 보면 고산지역은 Sodium or Potassium type과 bicarbonate type의 군을 이루었고, 중산간지 역은 Sodium or Potassium type과 No dominant type의 군을 형성하였으며, 저지대지역은 No dominant type과 Sulfate or Nitrate type의 군을, 해안지역은 Sodium or Potassium type과 Chloride type 및 No dominant type의 복잡한 용천수군을 형성하고 있었다. 즉 제주도 용천수는 해발고도가 높은 고산 및 중산간지역에서는 bicarbonate type이 우세한 수질조성에서 저지대 및 해안지역으로 유동되면서 non-bicarbonate type 형태의 수질로 변질되어가고 있었다.

  • PDF

수자원의 수질과 오염에 대한 기반암의 영향 연구 : 통계학적 접근 (The Effects of Bed-rock Formations on Water Quality and Contamination : Statistical Approaches)

  • 이병선;우남칠
    • 자원환경지질
    • /
    • 제36권6호
    • /
    • pp.415-429
    • /
    • 2003
  • 이 연구는 충북 미원면 일대 옥천대 흑색셰일 분포지의 상부 화전리층과 구룡산층 지역에서 기반암의 종류에 따른 수질과 오염특성의 변화를 규명하려는 목적으로 수행되었다. 배경수질은 상부 화전리층 지역 시료에서는 주로 (Ca, Mg)-$HCO_3$ 유형이, 구룡산층 지역 시료에서는 $SO_4$의 상대적인 부화로 인하여, 주로 (Ca, Mg)-$SO_4$, (Ca, Mg)-$HCO_3$ 유형이 나타났다. 지하수 시료의 경우, 상부 화전리층 시료에서는 탄산염 및 규산염 광물의 풍화가, 구룡산층 시료에서는 규산염 광물의 풍화가 주를 이루고 있다. 하천수 시료의 경우도 대부분 물-암석 반응의 영향을 받고 있는 것으로 나타났다 군집분석의 결과, 지하수 시료는 크게 3그룹으로, 하천수 시료는 크게 4그룹으로 분류된다. 요인분석의 결과, 물 시료내의 각각의 화학원소의 함량은 주로 자연적인 풍화의 요인과 일부 인위적인 오염의 영향을 받고 있는 것으로 나타났다. 변형된 오염지수(M.R.I.)를 사용하여 연구지역의 수질오염을 살펴본 결과 -0.08∼0.18 사이로 나타나며, 주로 구룡산층 채석장 지역 시료에서 0이상을 나타내었다. 이 연구에서 도입된 변형된 오염지수는 앞으로 수질 오염 예측 및 관리자를 위한 유용한 도구로 사용될 수 있을 것이다.

수격펌프의 효율성 및 현장 적용성 평가 (Evaluation of Field Feasibility and Efficiency of Hydraulic Ram Pump)

  • 이수형;윤희성;김동훈;신에스더;김용철;고경석;하규철
    • 자원환경지질
    • /
    • 제49권3호
    • /
    • pp.243-248
    • /
    • 2016
  • 본 연구는 수격펌프를 이용하여 용수 공급의 가능성과 효율성을 평가하기 위하여 수행되었다. 연구지역은 경상북도 상주시 화남면 임곡리로 과거 석탄개발에 사용된 갱도로부터 지속적으로 지하수 유출이 발생하고 있다. 유출되는 지하수는 일평균 약 $260m^3/day$의 수량을 가지는 것으로 파악되었다. 수격펌프는 수격현상을 이용하여 전력없이 공급원으로부터 고도차(압력)에 의해 물의 일부를 높은 곳으로 이송시키는 펌프이다. 수격펌프의 효율성을 파악하기 위해 수격펌프와의 고도차에 따라 3지점(${\Delta}h=19m$ (1지점), 30 m (2지점), 40 m (3지점))에서 유량을 측정하였다. 1지점에서는 약 $8.6{\sim}10.8m^3/day$, 2지점은 약 $3.98{\sim}4.39m^3/day$ 그리고 3지점에서는 약 $2.35{\sim}2.59m^3/day$의 물을 운반할 수 있는 것으로 파악되었다. 이번 연구를 통해 수격펌프가 산간지역 등에서 전력없이 물공급 시스템에 활용할 수 있을 것으로 파악되었다.

부탄분해미생물에 의한 가솔린첨가제 MTBE(Methyl tert-Butyl Ether) 분해 (Biodegradation of Gasoline Oxygenate MTBE(Methyl tert-Butyl Ether) by Butane-Utilizing Bacteria)

  • 장순웅;백승식;이시진
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제6권3호
    • /
    • pp.31-41
    • /
    • 2001
  • 본 논문에서는 순수균주인 ENV425와 오염된 토양으로부터 분리한 혼합균주를 이용하여 가솔린 산화제인 MTBE에 대한 분해 가능성을 조사했다. MTBE는 n-butane에서 성장한 ENV425와 혼합균주에 의해 공대사적으로 분해가 이루어졌다. 또한 아세틸렌의 첨가에 의해 n-butane과 MTBE의 분해가 완전히 방해되어짐에 따라 두 기질 모두 부탄 분해 효소에 의해 분해되어짐을 알 수 있었다. n-butane에서 성장한 ENV42S와 혼합균주는 MTBE를 분해하고, MTBE의 분해산물로 TBA가 생성되었다. TBA의 생성은 분해된 MTBE에 대하여 ENV425와 혼합균주 각각 54.7%, 58.6%가 관찰되었다. 그러나, Resting cell 실험에서는 ENV425와 혼합균주에 의한 산화 생성물로 TBA와 TBF가 생성되었다. ENV425와 혼합균주에 의한 최대 MTBE 분해속도는 각각 52.3 그리고 62.3 (nmol MTBE degraded/hr/mg TSS), 최대 $T_y$ (Transformation yield)는 각각 44.7, 34.0 (nmol MTBE degraded/$\mu$mol n-butane utilized)으로 나타났고, 최대 $T_c$ (Transformation capacity)는 각각 199, 226 (nmol MTBE degraded/mg TSS used)으로 나타났다.

  • PDF