• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.553-566
• /
• 2019

This study aimed to categorize pervious rubberized concrete into fresh and hardened concrete analyzing its durability, permeability and strength. During the globalization of modern life, growing population and industry rate have signified a sustainable approach to all aspects of modern life. In recent years, pervious concrete (porous concrete) has significantly substituted for pavements due to its mechanical and environmental properties. On the other hand, scrap rubber tire has been also contributed with several disposal challenges. Considering the huge amount of annually tire wastes tossing out, the conditions become worse. Pervious concrete (PC) gap has graded surface assisted with storm water management, recharging groundwater sources and alleviate water run-offs. The results have shown that the use of waste tires as aggregate built into pervious concrete has tremendously reduced the scrap tire wastes enhancing environmental compliance.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.151-157
• /
• 2021

Livestock farmers are using animal carcasses to dispose of the carcasses of livestock that have died of natural causes or disease. Most of the existing livestock carcass processors are mechanical in their structure without considering the environment. It has a function of sterilizing dead bodies at high pressure after processing them and causes environmental problems such as carbon monoxide emissions. If livestock carcasses occur, livestock farmers have to purchase their own livestock carcasses or entrust them to the outside world, which is costly. For this reason, the possibility of environmental pollution, infectious diseases, and spread has been increased recently by frequent dumping of dead bodies. The carcass of livestock mixed with manure not only serves as a medium for infectious diseases but also needsto be buried on a large scale as foot-and-mouth disease and avian influenza spread. As a result, the possibility of environmental pollution, such as contamination of groundwater, is increasing, so research is needed to protect and improve the environment. We aim to improve the process of processing livestock carcasses and purify the agricultural environment through development results on the form, structure and function of eco-friendly livestock carcasses. Its shape is applied with naturalshapessuch asstones and seeds. The material used in the dead body processis a brown beggar biocouple and is applied with an eco-friendly industrial animal recycling process. As a result of the study, it is expected to improve odors and the environment, and to be used as data to improve and help the livestock industry in the future.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.5
• /
• pp.1-10
• /
• 2005

Policies of the United States, the United Kingdom, the Netherlands, Germany and Denmark were compared and analyzed on risk assessment of contaminated sites. These countries were chosen from a feasible preliminary analysis of 18 countries of the European Union and the U. S. All the countries selected met two major criteria : I) implementation of risk assessment to determine the soil contamination and remediation targets of contaminated sites, ii) use of soil guidance values and risk assessment as complementary measures to determine soil contamination. Suggested policy improvements to Korea regarding these issues include i) legislation of a rational risk assessment methodology of contaminated sites, and ii) enactment of collaboration of risk assessment with the soil guidance values. To establish effective risk assessment legislation, additional in-depth research on social, economic and long-term effects of the proposed risk assessment methodologies, as well as the mutual consent of all parties including academia, industry, and administration will be necessary. Linking risk assessment with soil guidance values would be applicable to a site contaminated where the contaminant concentration exceeds a certain soil guidance value. In parallel, application of risk assessment to a site where a contaminant concentration is naturally different such as mining sites would be plausible. The policy suggestions above are not yet conclusive due to a lack of policy implementation, and simulation. Thus, additional research on developing risk assessment methodology is needed. Nevertheless, initiation of the suggested policy would increase the efficacy of Korean policy regarding the survey and remediation of contaminated sites.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.6
• /
• pp.75-80
• /
• 2005

Several metalliferous including Guedo mine, Manjung mine and Joil mine located at the upper watershed of Namhan river, were abandoned or closed since 1988 due to the mining industry promotion policy and thus disposed an enormous amount of mining wastes without a proper treatment facilities, resulting in soil pollution. In this research, total and fractional concentrations of heavy metals in mining wastes were analyzed and accordingly the degree of soil pollutions in the abandoned mine area were quantitatively assessed employing the several pollution indices. The mining waste samples from Guedo mine, Manjung mine and Joil mine recently abandoned were collected for the evaluation of the potential of water pollution by mining activities. Index of geoaccumulation fractional composition and removal efficiency of some heavy metals by different concentration of HCl treatment were analyzed. Index of geoaccumulation of Cd, Pb, Zn, Cu, Ni and Cr are 6, $4\~6,\;0\~6,\;4\~5$, 2 and 0 respectively. The index of geoaccumulation of Cd, Pb, Zn and Cu reveals the mining wastes has high pollution potential in the area. According to sequential extraction of metals in the mine wastes organic fraction of Cu, reducible fraction of Pb, residual fraction of Ni and Zn were the most abundant fraction of heavy metals in mining wastes.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.403-416
• /
• 2006

Magnetic method is rapid, cheap and simple geophysical exploration technique, and has wide range of applications such as resources prospecting, geological structure investigation and even geotechnical and environmental problems. Especially, aeromagnetics gives fundamental and useful geoscientific data fnr not only assessment of potential resources, but also national land planning. Magnetic method, perhaps the oldest geophysical technique, was relatively early introduced into Korea. Documents during Japanese occupation says that magnetic method was used for exploring metallic ore deposits and hot spring, and that a geomagnetic observatory was operated. From mid 1950's, after Korean War, magnetic explorations for natural resources such as metallic ore, uranium, coal, and groundwater were intensively executed for industrialization. Apache aeromagnetic survey project during $1958{\sim}1959$ and its ground follow-up surveys are typical and important cases in those days. Magnetic survey techniques were rapidly advanced during 1970's and 1980's with improvements of instruments, growth of geophysical manpower, and availability of computers. The national aeromagnetic mapping project by KIGAM in 1981 showed the improved technical capability of those days. Decline of mining industry since mid 1980's moved the exploration objects from traditional resources to new ones such as groundwater and geothermal resources, and applications to investigation of geological structure were revived. Recently appeared applications such as natural hazard assessment, and engineering and environmental studies increased the magnetic method's utility in the realm of exploration.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.37-47
• /
• 2004

In Korea, over three hundreds of the coal mines were closed or abandoned due to the depression of the mining industry since the late 1980s. Many of them locate in the steep mountain valleys and the coal mine wastes had been disposed without a proper treatment From these mines, enormous amounts of coal mine overburdens have been abandoned in the slopes and the ample amounts of acid mine drainage (AMD) from either portal or overburdens have been discharging directly to the streams, causing the detrimental effects on soil and water qualities. Objectives of this research were to reclaim the coal mine overburdens using the lime waste cake from the soda ash production by stabilizing the overburden slopes, introducing the vegetation alleviate the environmental problems caused by the closed coal mines. The percentages of the grass distribution ratio (%) and the surface coverage ($\textrm{cm}^2$) in each treatment plot were determined during June to August after seed spraying grasses such as orchard grass (Dactylis glomerata L), Kentucky Bluegrass (Poa pratensis L.) and Eulalia (Miscanthus sinensis Anderss) at the end of May. The grasses covered only 15.5 % of the coal overburden plot at the early stage but the coverage was increased with time to 33% in August. Growth of such grasses was enhanced with the combined treatments of lime waste and topsoil resulting in the increased surface coverage by the grasses. The Increment of the surface coverage from June to August was higher with lime waste treatments. The distribution percentages and surface coverage were highest when the lime wastes were treated at 25 % of the lime requirement. This might be related with the high salt contents in the hire wastes. Results demonstrated that the amounts of lime wastes at 25% of the lime requirement were sufficient for neutralizing the acidic coal overburden and introducing the re-vegetation. Either layering between the coal waste and topsoil or mixing with coal overburdens could be adopted as the lime waste treatment method. The combined treatment of lime wastes and topsoil was recommended for re-vegetation in the coal overburden slopes. The lime wastes from the soda ash production might have a potential to be recycled for the reclamation of the abandoned coal mines to alleviate the environmental problems associated with coal mine waste.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1023-1035
• /
• 2015

This study applies 3-D N-S solver based on PBM (Porous Body Model), LED-WASS-3D ver 2.0 to directly analyze non-linear interaction of seawater-freshwater-coastal aquifer in order to simulate the seawater infiltration into coastal aquifer. This numerical simulation is the first trial in Korea, as well as unusual and new numerical analysis abroad. Firstly, to validate the applied numerical model, the validity and effectiveness was verified for the numerical model by comparing and considering it with the result of laboratory experiment for seawater-freshwater interface in coastal aquifer. And then it simulated the seawater infiltration into coastal aquifer considering the changed levels of seawater and groundwater in order to analyze the distribution characteristics of flow field and seawater-freshwater interface of coastal aquifer as the level difference between seawater and groundwater and rate of seawater level (${\Delta}h/h$) increased. In addition, the characteristics of seawater infiltration were analyzed from the vertical salinity in the coastal aquifer by ${\Delta}h/h$, which cannot be obtained from existing non-diffusion numerical models. Finally, it analyzed the effect of ${\Delta}h/h$ on the seawater infiltration distance in coastal aquifer, which was indexed.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.121-136
• /
• 2022

Purpose : Marine therapy is an activity that promotes public health such as constitution improvement, immunity improvement, and anti-aging by utilizing marine therapeutic resources such as seawater, mud, seaweed, salt and sea climate. In Europe developed countries, the marine therapy industry has been developing for centuries, with France, Germany, and Israel leading the way. Currently, it has achieved great industrial achievements and is of great help in improving the human health. The purpose of this study is to investigate how marine therapeutic resources benefit to human health, as well as how to study and utilize their efficacy. We analyzed previous research articles related to the effects of marine therapeutic resources. Methods : The study included a total of 830 published literatures in the last 20 years from the Republic of Korea and other contries. PubMed and Google Scholar were utilized to collect the foreign source while the local scientific publications were accessed through the Korean Education and research Information Service (KERIS) and Korean studies Information Service System (KISS). The keywords used to search foreign literature were "marine therapy", "Thalassotherapy", "seawater", "deep seawater", "saline groundwater", "sand therapy", "mud therapy", "hydrotherapy", "seaweed", "Sun light", "sea salt", "marine animal", and "marine microorganisms" were combined, and for the domestic literature, the keywords were "marine therapy", "marine therapeutic resources", "seawater", and "sand". Results : A total of 830 research papers were found as a result of searching for domestic and international papers related to marine therapeutic resources. The collected documents were classified into 175 seawater resources, 259 marine mineral resources, 41 marine environment, and 355 marine organisms. The efficacy of each marine therapeutic resources was analyzed. By resources type, there were about 213 papers on the efficacy of seaweed, followed by about 175 papers on seawater, 142 on microorganisms, 124 on mud/peat, and sand, salt, minerals and others are appeared in order (Table 1). Conclusion : Korea has the highest marine biodiversity index, excellent tidal flats, four distinct seasons, and various sea environments of the East sea, Yellow sea, South sea and Jeju sea. For this reason, Korea has a much more diverse marine therapeutic resources than other advanced countries in the marine therapy industry. prebiously, we thought that the sea was only valuable as a shipping port and fishery industry. But now, it been shown that the ocean can become a new industrial field which can contribute to human health and well-being by providing healing and therapy to people through the gift of marine resources.

• Journal of Korea Soil Environment Society
• /
• v.5 no.2
• /
• pp.45-53
• /
• 2000

Two extraction methods for total petroleum hydrocarbon (TPH) from contaminated soil were evaluated. The soil used for this study was sandy loam. Diesel oil was selected as representative petroleum hydrocarbons and was spiked at 100, 10,000, 50,000mg TPH/kg dry soil. Percentage recovery of TPH by shaking method was higher compared to Soxhlet extraction. At extraction time of 2 hours and sample to solvent ratio of 1 : 5, the highest percentage recovery was obtained. In this condition, percentage recovery of TPH in soil contaminated with 100mg/kg and 50,000mg/kg as TPH was 95.9% and 95.5%, respectively The volume of solvent lost by volatilization in shaking method was relatively small compared to Soxhlet extraction.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.