• Tribology and Lubricants
• /
• v.34 no.1
• /
• pp.33-41
• /
• 2018

This paper describes a new test rig for identification of rotordynamic force coefficients of squeeze film dampers (SFDs) in automotive turbochargers (TCs). Prior studies have mainly concentrated on relatively large-sized SFDs used in aircraft engines, turbocompressors, and turbopumps. The main objective of the current study is to propose a test rig for identification of dynamic force coefficients of small-sized SFDs (a journal diameter of ~11 mm). The current test rig consists of a journal, a SFD cartridge, four support rods, an upper structure, a data acquisition (DAQ) system, and an oil circulation unit. The annular gaps between the journal outer surface and SFD cartridge inner surface create SFD film lands. The damper has two parallel film lands separated by a central groove, having an axial length and depth of 3 mm. Each film land has a length of 4 mm with a $40{\mu}m$ radial clearance. The static load and dynamic impact tests identify the structural characteristics (i.e., stiffness and natural frequency) of the journal and assembled test rig. The measurements show good agreement with predictions. The SFD performance data from this test rig will be used to develop innovative TC rotor systems with improved NVH and reliability characteristics incorporating advanced SFD technology.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.111-115
• /
• 2007

Background: Selective diagnostic blocks of the medial branches of the dorsal primary ramus are usually performed under the guidance of fluoroscopic or computed tomography. Recently, however, ultrasound guidance has been suggested as an altemative method. In this study, the distances between the vertebral structures were measured and compared with the values measured using magnetic resonance imaging (MRI) to assess the clinical feasibility of using ultrasound-guided block in Korean patients. Methods: Five male and 15 female patients were enrolled in this study. The target point of the medial branch block in our study was the groove at the base of the superior articular process, We measured the depth from the skin to the target point at the transverse process (d-TP) and to the most superficial point of the superior articular process (d-AP). Results: The d-TP and d-AP values measured under ultrasound guidance were concordant with the values measured using MRI. Conclusions: The images of the bony landmarks obtained under ultrasound examination could be useful for ultrasound-guided lumbar medial branch block.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.58-61
• /
• 1995

Instead of using CCl$_4$CCl$_2$F$_2$ gases, we used a alternative reaction gas of CFCs which we have developed, for the experiment of laser induced dry etching of laser induced dry etching of GaAs, and compared with the etch profile of a usual reation gas. Laser powers(power density) on the sample surface were varied from 100 mW(12.7 MW/$\textrm{cm}^2$) to 210mW(27 MW/$\textrm{cm}^2$) The laser beam was scanned over the sample by moving the cell with a speed raging from 8.3$\mu\textrm{m}$/sec and the gas pressure also was varied form 260 Torr to 760 Torr, High etching rates up to 136 $\mu\textrm{m}$/sec and an aspect ratio of 2.6 have been achieved by single scan of laser beam. The chemical compositions of the reaction products deposited on the etched groove were measured by Auger electron spectroscopy(AES) Etch profiles, including depth and width were observed by scanning electron microscopy(SEM)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.93-101
• /
• 1987

Residual stresses have remained around welding areas of a steel structure member after welding operation. The major causes to occur these residual stresses are the local heat due to a welding, the heat stresses due to a irregular and rapid cooling condition, the material and rigidity of a steel structure. Ultimatly, these residual stresses have been known to decrease a brittle fracture strength, a fatigue strength, a buckling strength, dynamic properties, and the corrosion resistance of the material. This paper deals with the residual stresses on a steel structure member through experimental studies. SWS 58 plates were welded by the method of X-groove type. These plates were layed on the heat treatment at four different temperatures; $350^{\circ}C$, $500^{\circ}C$, $650^{\circ}C$ and $800^{\circ}C$. The resulting residual Stresses were measured by hole drilling method, and the followings were obtained. The residual stresses on the vicinity of a welding point were relieved most effectively at the temperature of $650^{\circ}C$, and these stresses relieved completly when the ratio of a hole diamerter to a hole depth became unity. Hardness test shows that the higher value of hardness at the heat affected zone dropped to belower as the temperature went up from $350^{\circ}C$ to $800^{\circ}C$. The Welding input heats have not influenced the magnitude of residual stresses at the input heat range between above and below one forth than standard.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.309-320
• /
• 1999

Medial patellar luxation in dogs is one of the most common patellar problems presented to the veterinary practitioner. It is observed in toy and miniature breed and the majority of cases is a congenital form. Because of extensor mechanism's instability, it causes deformity and disorder in the growth of the affected limb when the luxation is left without treatment As lameness is not easily detectable in puppies, early diagnosis and correction are essential for therapy. Up to now, there has not been any reports refering to the diagnostic methods and the optimal age for correction in young dogs. Thirteen 45-90 days old puppies, have grade I and/or II medial patellar luxation. Only by palpation, all 13 dogs were diagnosed of patelar luxation. Skyline radiographic view was useful to interpret patellar morphology and depth of trochlear groove only above 60 days old. However, it was difficult to make definite diagnosis patellar luxation. The caudocranial and lateral radiographic view as well as ultrasonographic skyline view were not showed of patellar luxation. 2 puppies had unilateral patellar luxation and 11 puppies had bilateral patellar luxation which more serious on the left than on the right. Only 3 puppies among 11 puppies with bilateral patellar luxation were observed of lameness degree 1. Regardless of grade of patellar luxation and lameness, we performed trochlear chondroplasty using a U-shape sculpture blade to minimize cartilage injury, transposition of tibia tuberosity with No. 1 Supramid to align extensor mechanism and lateral imbrication. After surgery, we examined the operated animal daily for 10 days and on 15, 30 and 60 days after surgery respectively. After operation, pain and fever became normal on 7 days, swelling on 10 days, respectively. On 10 days after surgery, dogs showed normal standing position, and normal walking was observed in 15 days after surgery. In force plate analysis, the operated legs were normal weight bearing at 30 days after operation. After surgery, not only patellar luxation and clinical signs have been gradually reduced but also bone growth have become normal without showing growth physeal plate injury. The survival rate of puppies over 62 days old was 100%, while 42-45 days old 37.5%. The above results suggest that optimal age for surgical correction of congenital medial patellar luxation is recommended over 60 days old. In conclusion, combination of trochlear chondroplasty, transposition of tibia tuberosity, and lateral retinacular imbrication is appropriate for over 60 days old puppies to efficiently correct patellar luxation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.246-251
• /
• 2012

Purpose: The purpose of the study is to evaluate the effectiveness of anterior segmental osteotomy (ASO) in bimaxillary protrusion (BP) patients by comparison between the mandibular soft and hard tissue changes from orthodontic treatment and ASO. Methods: All 44 patients were diagnosed with BP in Kyung-Hee Medical Center. Orthodontic treatment with teeth extractions were underwent by 23 patients (Group A) and 21 patients underwent ASO (Group B). Mandibular soft and hard tissue changes were measured and evaluated, which were based on the vertical and horizontal reference line in lateral cephalometric radiographs. Statistical significance between the changes and correlation between each measurement were analyzed. Results: The amount of B point movement was lesser than that of the lower incisal tip (LIT) retraction, and LIT was tilted lingually in group A. The posterior movement discrepancy between LIT and B point was insignificant, and the inclination of lower incisor was not changed in group B. The soft tissues, including the lower lip, showed a posterior movement and reduction in the depth of mento-labial groove. According to the correlation analysis, the movement of the lower incisor was significantly related to the movement of the lower lip in group A, and the movement of the lower incisor was significantly related to that of the movement of lower lip, B point and Pog in group B. Conclusion: The orthodontic treatment in BP patients results in posterior tilting movement of the lower incisor, but ASO results in the bodily movement of the lower incisor. Consequently, ASO is more effective in BP cases because it ensures the controlled movement of the lower incisors.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.69-77
• /
• 2003

This paper presents test results on eight reduced beam section(RBS) steel moment connections. The testing program addressed bolted versus welded web connection and panel zone(PZ) strength as key variables, Specimens with medium PZ strength were designed to promote energy dissipation from both PZ and RBS regions such that the requirement for expensive doublet plates could be reduced. Both strong and medium PZ specimens with a welded web connection were able to provide satisfactory connection rotation capacity for special moment-resisting frames. On the other hand, specimens with a bolted web connection performed poorly due to premature brittle fracture of the beam flange of the weld access hole. If fracture within the beam flange groove weld was avoided using quality welding, the fracture tended to move into the beam flange base metal of the weld access hole. Plausible explanation of a higher incidence of base metal fracture in bolted web specimens was presented. The measured strain data confirmed that the classical beam theory dose not provide reliable shear transfer prediction in the connection. The practice of providing web bolts uniformly along the beam depth was brought into question. Criteria for a balanced PZ strength improves the plastic rotation capacity while reduces the amount of beam distortion ore also proposed.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100. Z250. DenFil, Tetric Ceram. ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25^{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the non-slumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also. slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2010

The purpose of this study is to compare microleakage and penetration depths of sealants applied in carious and sound fissures. Extracted premolars(n=80) were divided into 4 groups according to caries status. 1; sound, 2; stained, 3; initial caries, 4; enamel caries. Sealants were applied to the occlusal groove as per manufacturers' instructions, and specimens were thermocycled, stained, sectioned, and examined for microleakage and penetration ability. The results of the present study are as follow: 1. It showed significantly higher microleakage scores in group I than group Two, Three, Four(p<0.05), but no significant difference was found between group Two, Three, and IV(p>0.05). 2. It showed significantly higher penetration scores in group Four (p<0.05), followed by group One, Two, Three, but no significant difference was found between group One, Two, and Three(p>0.05). Based on the results of present study, when the borders of the fissure sealant are on carious enamel, a significantly higher microleakage must be expected. It is considered that depth of enamel caries in the fissure should be taken into account when applying a fissure sealant.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.235-245
• /
• 2008

The aim of this study was to develop a method for measuring the slumping resistance of resin composites and to relate it to the rheological characteristics. Five commercial hybrid composites (Z100, Z250, DenFil, Tetric Ceram, ClearFil) and a nanofill composite (Z350) were used to make disc-shaped specimens of 2 mm thickness. An aluminum mold with square shaped cutting surface was pressed onto the composite discs to make standardized imprints. The imprints were light-cured either immediately (non-slumped) or after waiting for 3 minutes at $25{\circ}C$ (slumped). White stone replicas were made and then scanned for topography using a laser 3-D profilometer. Slumping resistance index (SRI) was defined as the ratio of the groove depth of the slumped specimen to that of the nonslumped specimen. The pre-cure viscoelasticity of each composite was evaluated by an oscillatory shear test and normal stress was measured by a squeeze test using a rheometer. Flow test was also performed using a flow tester. Correlation analysis was performed to investigate the relationship between the viscoelastic properties and the SRI. SRI varied between the six materials (Z100 < DenFil < Z250 < ClearFil < Tetric Ceram < Z350). The SRI was strongly correlated with the viscous (loss) shear modulus G' but not with the loss tangent. Also, slumping resistance was more closely related to the resistance to shear flow than to the normal stress. Slumping tendency could be quantified using the imprint method and SRI. The index may be applicable to evaluate the clinical handling characteristics of composites.