• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.753-760
• /
• 2007

For protection of the cylinder wall of the ball mill for grinding raw ore. the inner side of the cylinder is covered with rubber liner. The rubber is easily worn down because the rubber relatively soft compared with raw ore. So the rubber liner in the ball mill cylinder must be replaced almost every year and the cost for replacing rubber liner formidable. In this paper, for reducing or excluding the cost of replacing rubber liner the basalt liner is designed. The basalt materials are generally harder than raw ore and the basalt liner in the ball mill does not wear down and so it can be used almost permanently. The concave surfaces are made on the liner of the ball mill and the liner in the cylinder wall plays also the role of raising the steel balls mixed in the raw ore. The section profiles of the concave surface have an important effect on the performance of the ball mill. The deep concave grooves raise the steel balls to high levels and give the large potential energy to the steel balls impacting to the raw ore. But if the concave grooves are too deep. the steel balls raised too high by the concave grooves fly along the parabolic path and reach to the other side of cylinder wall and so the steel balls do not play the roles of grinding the raw ore. The forces acting to a steel ball in a concave groove of the cylinder liner are also analyzed in this paper. The formulas calculating the height and the impact point of the steel ball are introduced and presented. Based to these formulas, the optimum section profiles of the basalt liner are presented.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.33-40
• /
• 2021

Current industrial flow is directed toward reducing the usage of raw materials by reusing parts, which is referred to as a circular economy (CE). Repair is one of the most value-added approaches in CE, which can be efficiently accomplished via additive manufacturing. The repair technology of metallic parts via the directed energy deposition process, which includes the selective removal and redeposition of damaged regions of metallic parts. Residual stress characteristics depend on the shape of the part and the shape of the redeposition region. The objective of this study is to investigate the effects of the radius and corner position of the substrate on the residual stresses for repair by using finite element analysis (FEA). The residual stress distribution of the 45° angle groove at the edge of the circular shape models on the outer and inner radii was analytically investigated. The analysis was accomplished using SYSWELD software by applying a moving heat source with defined material properties and cooling conditions integrated into the FEA model. The results showed a similar pattern of concentrated stress distribution for all models except the 40-mm and 60-mm radii, for which the maximum stress locations were different. The maximum residual stresses are high but lower than the yield strength, suggesting the absence of cracks and fractures due to residual stresses.

• 한국광학회지
• /
• 제10권6호
• /
• pp.500-506
• /
• 1999

레이저 다이오드와 수신광검출기가 집적된 소자를 V-홈을 가진 실리콘 광학벤치에 flip-chip 본딩하고, 경사면을 가진 하나의 단일모드 광섬유와 수동정렬하는 방법을 사용하여 가입자망을 위한 저가의 양방향 송수신 모듈을 설계, 제작하였다. 광섬유의 단면 경사각에 따른 송신광결합 효율과 수신광결합 효율사이의 병목점을 찾기 위해 Gaussian빔 모델을 사용하여 수평정렬거리, 광섬유 단면 경사각, 수직정렬오차등의 변수에 따른 광결합계수를 계산함으로써, 최적의 광정렬조건을 예측하였다. 또한 실리콘 광학벤치에서 광결합효율을 측정하여 광섬유의 수직정렬오차에 따른 광결합계수의 감소가 광섬유의 경사각에 의해 보상될 수 있다는 계산결과의 타당함을 확인하였다. 실제의 sub-module 제작 및 광결합 실험에서 송신빔이 광섬유 단면에 반사되어 PD로 입사되는 것을 최소화하기 위하여 광섬유 단면을 경사절두원추형으로 제작함으로써 PD의 수신 잡음을 $30mu$m 이상의 정렬거리에서 -35dB이하로 유지할 수 있었다. 같은 조건에서 단면 경사각이 $12^{\circ}$인 광섬유에 의해 -12.1dB의 송신출력과 0.2A/W의 responsivity를 얻을 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.40.1-40.8
• /
• 2018

Background: A 9-year-old male showed severe defects in midface structures, which resulted in maxillary hypoplasia, ocular hypertelorism, relative mandibular prognathism, and syndactyly. He had been diagnosed as having Apert syndrome and received a surgery of frontal calvaria distraction osteotomy to treat the steep forehead at 6 months old, and a surgery of digital separation to treat severe syndactyly of both hands at 6 years old. Nevertheless, he still showed a turribrachycephalic cranial profile with proptosis, a horizontal groove above supraorbital ridge, and a short nose with bulbous tip. Methods: Fundamental aberrant growth may be associated with the cranial base structure in radiological observation. Results: The Apert syndrome patient had a shorter and thinner nasal septum in panthomogram, PA view, and Waters' view; shorter zygomatico-maxillary width (83.5 mm) in Waters' view; shorter length between the sella and nasion (63.7 mm) on cephalogram; and bigger zygomatic axis angle of the cranial base (118.2°) in basal cranial view than a normal 9-year-old male (94.8 mm, 72.5 mm, 98.1°, respectively). On the other hand, the Apert syndrome patient showed interdigitating calcification of coronal suture similar to that of a normal 30-year-old male in a skull PA view. Conclusion: Taken together, the Apert syndrome patient, 9 years old, showed retarded growth of the anterior cranial base affecting severe midface hypoplasia, which resulted in a hypoplastic nasal septum axis, retruded zygomatic axes, and retarded growth of the maxilla and palate even after frontal calvaria distraction osteotomy 8 years ago. Therefore, it was suggested that the severe midface hypoplasia and dysostotic facial profile of the present Apert syndrome case are closely relevant to the aberrant growth of the anterior cranial base supporting the whole oro-facial and forebrain development.

• Journal of Korean Neurosurgical Society
• /
• 제29권11호
• /
• pp.1437-1444
• /
• 2000

저자들은 10년동안 수술을 시행받았던 212례의 수막종 환자중 뇌기저부에 위치한 61례에 대한 임상 분석을 시행한 결과 다음과 같은 결과를 얻었다. 1) 본 연구기간중 뇌기저부 수막종 환자는 61례로 전체의 29%를 차지하였으며, 평균 추적기간은 약 52개월이었다. 2) 성비는 여성이 남성보다 약 2배 많았으며, 평균연령은 52세였다. 3) 위치별로는 후두개와가 가장 많았으며, 전체적으로는 접형골연부, 천막부 및 소뇌교각부가 대부분을 차지하였다. 4) 호발증상 및 징후로는 두통, 뇌신경마비 및 소뇌징후 순으로 나타났다. 5) 종양제거정도는 심슨등급 I, II로 전적출한 경우가 82%이었으며, 심슨등급 III로 아전적출한 경우가 18%이었다. 6) 병리조직결과는 양성이 85%로 대부분을 차지하였으며, 비정형성과 악성은 각각 10%, 5%를 차지하였다. 7) 술후 보조적 치료는 악성, 부분적출 및 재발한 경우에 사용하였다. 8) 술후 합병증으로는 뇌척수액누출, 뇌신경마비 및 간질 발작 순이었다. 9) 술후 사망한 경우는 수술후 사망한 1례와 종양 재발에 의한 사망 2례이었다. 10) 재발은 약 15%로 심슨등급 III와 악성인 경우에 높았으며, 재발 위치는 천막부, 접형골연 및 소뇌교각부 순이었다. 결론적으로 뇌기저부 수막종의 수술은 종양 주변부의 중요한 구조물이 위치함에 따라 낮은 사망률 및 합병증 발생률을 가지고 수술적 적출이 어렵지만, 술전 방사선학적 소견의 정확한 이해와 적절한 접근법의 선택, 뇌기저부 재건술이 술후 합병증의 감소 및 종양적출을 위해 필수라고 생각한다.