• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.69-77
• /
• 2003

본 연구는 8개의 RBS(reduced beam section) 내진 철골모멘트접합부의 실물대 실험결과를 요약한 것이다. 실험의 주요변수는 보 웨브 접합법 및 패널존 강도를 택하였다. 균형 패널존 시험체는 접합부의 내진성능을 감소시키지 않으면서, 보와 패널존이 함께 균형적으로 지진에너지를 소산시키도록 설계하여 값비싼 패널존 보강판(doubler plates)의 수요를 줄이고자 시도한 것이다. 보 웨브를 용접한 시험제는 모두 특별 연성모멘트골조에서 요구되는 접합부 회전능력을 충분히 발휘하였다. 반면 보 웨브를 볼트 접합한 시험체는 조기에 스캘럽을 가로지르는 취성파단이 발생하는 열등한 성능을 보였다. 보 그루브 용접부 자체의 취성파괴가 본 연구에서와 같이 양질의 용접에 의해 방지되면, 스켈럽 부근의 취성파단이 다음에 해결해야 할 문제로 대두되는 경향을 보인다. 보 웨브를 볼팅한 경우에 접합부 취성파단의 빈도가 월등히 높은 이유를 실험 및 해석결과를 토대로 제시하였다. 측정된 변형도 데이터에 의할 때, 접합부의 전단력 전달메카니즘은 흔히 가정하는 고전 휨이론에 의한 예측과 전혀 다르다. 이는 전통적 보 웨브 설계법을 재검토할 필요가 있음을 시사하는 것이다. 아울러, 접합부에서 요구되는 바람직한 거동기준을 제시하고 이를 근거로 균형 패널존의 강도범위에 대한 예비적 추정치를 제시하였다.

• 한국광학회지
• /
• 제10권6호
• /
• pp.500-506
• /
• 1999

레이저 다이오드와 수신광검출기가 집적된 소자를 V-홈을 가진 실리콘 광학벤치에 flip-chip 본딩하고, 경사면을 가진 하나의 단일모드 광섬유와 수동정렬하는 방법을 사용하여 가입자망을 위한 저가의 양방향 송수신 모듈을 설계, 제작하였다. 광섬유의 단면 경사각에 따른 송신광결합 효율과 수신광결합 효율사이의 병목점을 찾기 위해 Gaussian빔 모델을 사용하여 수평정렬거리, 광섬유 단면 경사각, 수직정렬오차등의 변수에 따른 광결합계수를 계산함으로써, 최적의 광정렬조건을 예측하였다. 또한 실리콘 광학벤치에서 광결합효율을 측정하여 광섬유의 수직정렬오차에 따른 광결합계수의 감소가 광섬유의 경사각에 의해 보상될 수 있다는 계산결과의 타당함을 확인하였다. 실제의 sub-module 제작 및 광결합 실험에서 송신빔이 광섬유 단면에 반사되어 PD로 입사되는 것을 최소화하기 위하여 광섬유 단면을 경사절두원추형으로 제작함으로써 PD의 수신 잡음을 $30mu$m 이상의 정렬거리에서 -35dB이하로 유지할 수 있었다. 같은 조건에서 단면 경사각이 $12^{\circ}$인 광섬유에 의해 -12.1dB의 송신출력과 0.2A/W의 responsivity를 얻을 수 있었다.

• 대한두경부종양학회지
• /
• 제18권1호
• /
• pp.11-17
• /
• 2002

Objectives: Expression of HMGI(Y), a nucleoprotein that binds to A/T rich sequences in the minor groove of the DNA helix, is observed in neoplastically transformed cells but not in normal cells. We have analyzed HMGI(Y), p53 expression and Ki-67 labelling index in squamous cell carcinomas of the head and neck, and evaluated its clinicopathologic significance. Materials and Methods: 40 cases of squamous cell carcinoma of the head and neck were entered on the study of immunohistochemical stains for HMGI(Y), p53 and Ki-67. We analyzed the relationship between HMGI(Y), p53, Ki-67 expression and age, sex, primary tumor site, stage, survival rate, recurrence. Results: HMGI(Y) expression evidenced by immunohistochemical staining was observed in 35 of 40 (87.5%) squamous cell carcinoma of the head and neck. But no significant correlation was observed between HMGI(Y) expression and other clinical factors such as primary site, tumor stage, differenciation, cervical lymph node, metastasis, recurrence and immunohistochemical status of p53. The Ki-67 labelling index was significantly correlated with recurrence and HMGI(Y) expression (p<0.05). Conclusion: This results suggest the Ki-67 is a good prognostic factor and the HMGI(Y) expression plays some roles in carcinogenesis and cellular proliferation of squamous cell carcinoma of the head and neck. HMGI(Y) gene can be used as a cancer marker, the correlation between the gene expression and the prognosis of the cancer patient should be proved in the future studies.

• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.47-51
• /
• 2006

디바이스의 고집적화로 인한 다층 배선구조로 인해 초점심도가 중요해짐에 따라 표면의 평탄도가 디바이스에 매우 큰 영향을 주게 되어, 표면의 평탄도를 결정지어주는 CMP(Chemical Mechanical Polishing) 공정이 매우 중요한 요소가 되었다. CMP 공정에는 슬러리, 연마패드, 컨디셔닝 디스크와 같은 소모품들이 사용된다. 이러한 소모품 중 하나인 컨디셔닝 디스크를 이용한 컨디셔닝 공정은 CMP 공정이 끝난 후 패드의 기공과 groove 내에 잔류 하는 화학반응물이나 슬러리와 같은 잔유물들을 컨디셔닝 디스크 표면에 부착되어 있는 다이아몬드를 이용하여 제거 함으로써 연마율을 높이고, 연마 패드의 수명을 증가 시켜주는 역할을 한다. 컨디셔닝 공정을 실시함으로써 연마 패드의 수명이 연장되기 때문에 경제적인 부분에서도 큰 이점을 가지게 된다. 본 연구에서는 이러한 CMP 공정에서 중요한 역할을 하는 소모품 중 하나인 컨디셔닝 디스크 표면에 존재하는 다이아몬드의 밀도, 형상 그리고 크기에 따라 연마 패드의 회복력 변화를 알아봄으로써 효율적인 컨디션닝 디스크의 특성을 평가해 보았다.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.977-983
• /
• 2007

최근 근거리에서 수신 모듈에 무선으로 전력을 전달하는 시스템이 많아지고 있다. 무선으로 전력을 공급할 때, 수신 공간의 효율적인 사용을 위하여 ferrite core 주변에 코일을 감아 유도기 전력을 얻는다. 본 논문에서는 100kHz 균일한 단방향의 자계 환경 내에 위치한 페라이트 코어 내부의 자계 분포를 분석한다. 수치 분석을 위 한 시뮬레이터는 유한요소 기법을 적용한 Ansoft사의 Maxwell Tool을 사용하였다. 페라이트 코어의 비투자율의 변화에 따라 집속되는 자속 밀도의 변화를 알아보고, 코일의 권선을 위해 코어의 일부를 잘라내었을 시 총자속의 변화량을 알아보았다. 계산 결과, 100 kHz 자계 환경 내에서 작은 페라이트 코어를 이용하면 코어 내에 약 $3.5{\sim}4$배의 자속 밀도가 증강됨을 확인하였다. 비투자율이 800이면서 반지름의 길이가 4.75 mm인 페라이트 코어의 가장자리에 0.5mm를 도려내었을 때 총 자속은 23% 감소함을 확인하였다.

• Journal of Korean Neurosurgical Society
• /
• 제53권5호
• /
• pp.288-292
• /
• 2013

Objective : Vertebral distraction is routinely performed during anterior cervical discectomy and fusion (ACDF). Overdistraction can injure the facet joints and may cause postoperative neck pain consequently. The purpose of this study was to investigate the clinical relevance of distraction force during ACDF. Methods : This study included 24 consecutive patients with single level cervical disc disease undergoing single level ACDF. We measure the maximum torque just before the the arm of the Caspar retractor was suspended by the rachet mechanism by turning the lever on the movable arm using a torque meter. In order to turn the lever using the torque driver, we made a linear groove on the top of the lever. We compared the neck disability index (NDI) and visual analogue scale (VAS) scores between the high torque group (distraction force>6 $kgf{\cdot}cm$) and the low torque group (distraction force${\leq}6kgf{\cdot}cm$) at routine postoperative intervals of 1, 3, 5 days and 1, 3, 6 months. Results : The VAS scores for posterior neck pain had a linear correlation with torque at postoperative 1st and 3rd days ($y=0.99{\times}-1.1$, $r^2=0.82$; $y=0.77{\times}-0.63$, $r^2=0.73$, respectively). VAS scores for posterior neck pain were lower in the low torque group than in the high torque group on both 1 and 3 days postoperatively ($3.1{\pm}1.3$, $2.6{\pm}1.0$ compared with $6.0{\pm}0.6$, $4.9{\pm}0.8$, p<0.01). However, the difference in NDI scores was not statistically significant in all postoperative periods. Conclusion : Vertebral distraction may cause posterior neck pain in the immediate postoperative days. We recommend not to distract the intervertebral disc space excessively with a force of more than 6.0 $kgf{\cdot}cm$.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.679-684
• /
• 2017

마찰 교반 용접(Friction Stir Welding)은 금속 소재 대상으로 용접 툴과 용접 재료의 마찰열을 이용하여 재료 융점 이하의 온도에서 접합하는 용접 기법이다. 이번 연구에서는 금속 접합시 쓰이는 마찰 교반 용접 기법을 활용하여 마그네슘 합금(AZ31)을 용접할 때, 용접시 발생하는 용접 대상인 마그네슘 합금의 온도 및 속도 변화에 대해 유동 해석 기법을 활용하여 분석하였다. 분석을 위해 유동 해석 툴인 플루언트를 활용하여 모델링 및 해석을 진행하였다. 먼저 용접 소재는 온도에 따라 변하는 고점도 뉴턴 유체로 가정하였으며, 나선형 홈이 있는 용접 툴의 회전에 의한 회전 유동 발생을 모사하기 위해 회전 영역과 정지 영역으로 구분하여 모사하였다. 용접 툴과 용접 재료 사이의 인터페이스는 마찰 및 미끄러짐 경계조건을 부여하여 용접 툴로의 열전달 효과를 고려하였다. 위의 유동 해석 모델링을 통한 과도 해석 결과로부터 시간의 변화에 따른 용접 소재의 속도와 온도 특성을 파악할 수 있었다.

• 한국작물학회지
• /
• 제34권s02호
• /
• pp.66-80
• /
• 1989

Salt injury in rice is caused mainly by the salinity in soil and in the irrigated water, and occasionaly by salinity delivered through typhoon from the sea. The salt concentration of rice plants increased with higher salinity in the soil of the rice growing. The climatic conditions, high temperature and solar radiation and dry conditions promote the salt absorption of rice plant in saline soil. The higher salt accumulation in the rice plant generally reduces the root activity and inhibits the absorption of minerals of rice plant, resulting the reduction of photosynthesis. The salt damages of rice plant, however, are different from different growth stage of rice plants as follows: 1. Germination of rice seed was slightly delayed up to 1.0％ of salt concentration and remarkably at 1. 5％, but none of rice seeds were germinated at 2.5％. This may be due to the delayed water uptake of rice seeds and the inhibition of enzyme activity, 2. It was enable to establish rice seedlings at seed bed by 0.2％ of salt concentration with some reduction of leaf elongation. The increasing of 0.3％ salt concentration caused to the seedling death with varietal differences, but most of seedlings were death at 0.4％ with no varietal differences. 3. Seedlings grown at the nursery over 0.1％ salt, gradually reduced in rooting activity after transplanting according to increasing the salt concentration from 0.1％ up to 0.3％ of paddy field. However, the seedlings grown in normal seed bed showed no difference in rooting between varieties up to 0.1％ but significantly different at 0.3％ between varieties, but greatly reduced at 0.5％ and died at last in paddy after transplanting. 4. At panicle initiation stage, rice plant delayed in heading by salt damage, at meiotic stage reduced in grains and its filling rate due to inhibition of glume and pollen developing, and salt damage at heading stage and till 3 weeks after heading caused to reduction of fertilization and ripening rate. In viewpoint of agricultural policy the overcoming strategy for salt injury is to secure sufficient water source. Irrigation and drainage systems as well as underground drainage is necessary to desalinize more effectively. This must be the most effective and positive way except cost. By cultural practice, growing the salt tolerant variety with high population could increase yield. The intermittent irrigation and fresh water flooding especially at transplanting and from panicle initiation to heading stage, the most sensitive to salt injury, is important to reduce the salt content in saline soil. During the off-cropping season, plough and rotavation with flooding followed by drainage, or submersion and drainage with groove could improve the desalinization. Increase of nitrogen fertilizer with more split application, and soil improvement by lime, organic matter and forign soil addition, could increase the rice yield. Shift of trans-planting is one of the way to escape from the salt injury.

• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.68-71
• /
• 2011

Purpose: To analyze relation between age or parameters measured before operation and cartilage erosion of the first metatarsal head measured during operation. Materials and Methods: The study was targeted at 56 patients and 79 feet, who underwent Scarf osteotomy or Scarf and Akin osteotomy from November 2009 through November 2010, and whose cartilage lesion of the first metatarsal head referred to the cartilage grade III or IV of the International Cartilage Repair Society. The measurement parameters were age, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle. The cartilage erosion of the first metatarsal head was measured by one surgeon using cellophane. Occupancy rate and frequent involved sites of the cartilage erosion were recorded using Auto$CAD^{(R)}$ and adobe Illustrator CS4 program. SPSS correlation test and T-test were used for statistical analysis of the parameters and the cartilage erosion. Results: The cartilage erosion was incurred frequently in the sagittal groove and the site where subluxation or dislocation of the tibial sesamoild bone occurred but frequent involved sites had no statistical significance with cartilage erosion. The age showed a statistical significance with the cartilage erosion in the correlation test (p=0.003). Especially, the group of over 51 year old patients was turned out to have association with the cartilage erosion, compared to the group of below 51 (p=0.007). But, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle were no statistical significance with the cartilage erosion. Conclusion: We found the more the age of patients increased (especially above 51), the more cartilage erosion increased. And it is thought that we pay attention to reduce tibial sesamoid bone.

• 대한수의학회지
• /
• 제47권1호
• /
• pp.7-17
• /
• 2007

The left main descending artery (LMDA) of left coronary artery (LCA) in rats runs around the left side of conus arteriosus after arising from the aortic sinus and descends to the apex of heart with branching several branches into the wall of left ventricle (LV). The ligation site of LMDA for myocardial infarction (MI) is the 2~4 mm from LCA origin, between the pulmonary trunk and left auricle. The characteristics that rat heart has no interventricular groove on the surface and its coronary arteries run intramyocardially with branching several branches give the difficulty in surgery for MI which resulted in expected size. This study was aimed to elucidate the branching patterns of the left coronary artery for analysis of MI size and for giving the basic data to producing small MI intentionally in 2 male species that are widely used, Sprague-Dowley (SD) and Wistar-Kyoto (WKY), in the world. Red latex casting was followed by the microdissection in 27 and 28 hearts of SD and WKY male rats, respectively. The branching patterns of LMDA were classified into 3 major types and others based on the left ventricular branches (L). The Type I, Type II, Type III and others are shown in 55.6%, 22.2%, 14.8%, and 7.4% in SD, 60.7%, 10.7%, 7.1%, and 21.5% in WKY, respectively. The branching number of the first left ventricular branch (L1) that are distribute the upper one third of LV was 1.2~1.5, and its branching sites were ranging 0.9~2.1 ᒠfrom LCA origin. L2, the second left ventricular branch distributing middle one third of LV, was the number of 1.2~1.4 and branching out ranging 5.1~5.7 mm. L3, the third left ventricular branch of LMDA distributing lower one third of LV, was the number of 1~1.5 and branching out ranging 7.0~9.3 mm from LCA origin. The common branch of L1 and L2 was branched from LMDA with the number of 1.1, and its site was located in the distance of mean of 1.5 mm and 2.8 mm in SD and WKY, respectively. The common branch of L2 and L3 was branched from LMDA with the number of 1, and its site was located in the distance of mean of 7.2 mm and 2.9 mm in SD and WKY, respectively. The right ventricular branches (R) of LMDA were short and branched in irregularly compared with L. The number of 1~4 of R were branched from LMDA. With regarding to the distribution area of L and the ligation site for MI, moderate MI (25~35% of LV) might be resulted in 70.4% and 60.7% in SD and WKY rats. Small MI might be produced intentionally if the ligation would be located at the 4~6 mm from LCA origin in the left side of LMDA. These data wold be helpful to expect the size of MI and to reproduce of small MI, intentionally, in rat hearts.