• Nuclear Engineering and Technology
• /
• v.33 no.3
• /
• pp.283-297
• /
• 2001

The CHF in PWR rod bundles is usually predicted by the local flow correlation approach based on subchannel analysis while difficulty exists due to the existence of spacer grids especially with mixing vanes. In order to evaluate the effect of spacer grids on CHF, the experimental rod bundle data with various types of spacer grids were analyzed using the subchannel code, COBRA-IV-i. For the Plain grid data, a CHF correlation was described as a function of local flow conditions and heated length, and then the residuals of the CHF in mixing vaned grids predicted by the correlation were examined in various kinds of grids. In order to compensate for the residual, three parameters, distances between grids and from the last grids to the CHF site, and equivalent hydraulic diameter were introduced into a grid parameter function representing the remaining effect of spacer grids predicted most of the CHF data points in plaing grids within $\pm$20 percent error band. Good agreement with the CHF data was also shown when the grid parameter function for mixing vaned grids of a specific design was used to compensate for the residuals of the CHF data predicted by the correlation.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.33-42
• /
• 2016

Spacer grids play an important role in maintaining the proper form of the fuel assembly structure and ensuring the safety of reactor core design. This study applies the Monte Carlo method to the analysis of the neutronics effects of spacer grids in a typical pressurized water reactor (PWR). The core problem used to analyze the neutronics effects of spacer grids is a modified version of Korea Advanced Institute of Science and Technology benchmark problem 1B, based on an Advanced Power Reactor 1400 (APR1400) core model. The spacer grids are modeled and added to this test problem in various ways. Then, by running MCNP5 for all cases of spacer grid modeling, some important numerical results, such as the effective multiplication factor, the spatial distributions of neutron flux, and its energy spectrum are obtained. The numerical results of each case of spacer grid modeling are analyzed and compared to assess which type has more advantages in accuracy of numerical results and effectiveness in terms of geometry building. The conclusion is that the most realistic modeling for Monte Carlo calculation is the "volume-preserving" streamlined heterogeneous spacer grids, but the "banded" dissolution spacer grids modeling is a more practical yet accurate model for routine (deterministic) analysis.

• Structural Engineering and Mechanics
• /
• v.58 no.3
• /
• pp.555-576
• /
• 2016

In this paper an efficient approach is introduced for design and analysis of double-layer grids including both geometrical and material nonlinearities, while the results are compared with those considering material nonlinearity. Optimum design procedure based on Enhanced Colliding Bodies Optimization method (ECBO) is applied to optimal design of two commonly used configurations of double-layer grids. Two ranges of spans as small and big sizes with certain bays of equal length in two directions are considered for each type of square grids. ECBO algorithm obtains minimum weight grid through appropriate selection of tube sections available in AISC Load and Resistance Factor Design (LRFD). Strength constraints of AISC-LRFD specifications and displacement constraints are imposed on these grids.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.1
• /
• pp.9-16
• /
• 2012

The present study presents the Phasor Discrete Particle Swarm Optimization (PDPSO) algorithm, an effective optimization technique, the multi-dimensional vectors of which consist of magnitudes and phase angles. PDPSO is employed in the configuration of micro-grids. Micro-grids are concepts of distribution system that directly unifies customers and distributed generations (DGs). Micro-grids could supply electric power to customers and conduct power transaction via a power market by operating economic dispatch of diverse cost functions through several DGs. If a large number of micro-grids exist in one distribution system, the algorithm needs to adjust the configuration of numerous micro-grids in order to supply electric power with minimum generation cost for all customers under the distribution system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.433-439
• /
• 2004

This paper reports the grid resolution issues on the supersonic mixing simulation inside the engine for future aerospace vehicles. Unstructured finite volume method is used for the simulations. Three types of grids are used, namely, hybrid unstructured grids composed of prism and tetrahedron cells, locally refined grids, and hexahedral grids. Hexahedral grids are used to take advantage of fine distribution naturally behind the edge of the ramp where the vortex is generated. These latter two grids show much improved evaluations of the vortex motion and the mixing of the injected and the main flows.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.405-416
• /
• 2005

This study contains the static buckling tests and static buckling analyses for small size grids and full size grids. The buckling tests and finite element analyses were performed to evaluate the buckling characteristics of the spacer grids in a pressurized water reactor fuel assembly and to evaluate the possibility of the prediction lot the buckling strength of spacer grids. The buckling tests were performed for small size grids and full size grids, and the correlations between buckling strength and the number of straps and the correlations between buckling strength and the number of rows are derived based on the test results. The static buckling analyses were performed to identify the effect of the number of rows and the number of columns on the buckling strength of spacer grid by a finite element method using ANSYS program and the results were compared with the buckling test results.

• The Journal of Information Systems
• /
• v.22 no.1
• /
• pp.225-248
• /
• 2013

Korean government has been implementing a smart grid testbed in Jeju Island for the low-carbon green growth. As smart grids are in the early stage of their diffusion, strategic guidelines and related measures are needed to spread them successfully. In general, the successful diffusion of new technologies or new products are mostly determined in its early stages. With the introduction of smart grids, the electricity market paradigm will be transformed into user-oriented from provider-oriented. Thus, a study on the diffusion of smart grids from the perspective of users is necessary. This paper examines factors affecting the adoption and diffusion of smart grids from users' perspectives and provide strategic guidelines for diffusing the smart grid. Researchers conducted in-depth interviews with 41 people who have been already using smart grids in the Jeju testbed. Semi-structured interviews were used to collect data. The interviews were recorded on a digital voice recorder memory and subsequently transcribed verbatim. A total of 133 pages of transcripts were obtained from about 10 hours interviews. 97 concepts, 47 sub-categories and 19 categories were identified through open coding of grounded theory. We suggested a paradigm model for diffusing smart grids and total of seven propositions as strategic guidelines.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.56-61
• /
• 2012

There have been a lot of reports about the effects of geomagnetically induced current(GIC) on the power grids. However there has been little domestic efforts made in this relatively urgent area which include academic research or risk assessments on GIC. There still exist a claim that domestic power grids might be in the safe state from GIC since our geomagnetic latitude is low and our power grid is relatively small scale. However it has been already demonstrated that GIC has an effect on power grids located at all latitudes. In this study, we have reviewed the transpiratory principle of the GIC, case studies of the major damage in various regions and we have calculated the GIC that can occur in domestic power grids. This paper presents some of the fundamental information about the risk assessment of domestic power grids from GIC although more thorough investigation should be made to ensure the safe operation of nationwide electric power infrastructure.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1743-1751
• /
• 2016

The increasing demand for high voltage DC grids resulting from the continuous installation of offshore wind farms in the North Sea has led to the concept of multi-terminal direct current (MTDC) grids, which face some challenges. Power (current) flow control is a challenge that must be addressed to realize a reliable operation of MTDC grids. This paper presents a reduced switch count topology of a current flow controller (CFC) for power flow and current limiting applications in MTDC grids. A simple control system based on hysteresis band current control is proposed for the CFC. The theory of operation and control of the CFC are demonstrated. The key features of the proposed controller, including cable current balancing, cable current limiting, and current nulling, are illustrated. An MTDC grid is simulated using MATLAB/SIMULINK software to evaluate the steady state and dynamic performance of the proposed CFC topology. Furthermore, a low power prototype is built for a CFC to experimentally validate its performance using rapid control prototyping. Simulation and experimental studies indicate the fast dynamic response and precise results of the proposed topology. Furthermore, the proposed controller offers a real solution for power flow challenges in MTDC grids.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.36-42
• /
• 2013

This paper deals with the frequency-dependent ground impedance of ground grids combined with the carbon ground electrodes. Ground grids are generally valid for multipurpose grounding systems as well as lightning protection systems. The carbon ground electrodes may be supplementarily used to reduce the high frequency ground impedance and to improve the transient response to surge currents. The frequency-dependent ground impedances of ground grids combined with or without the carbon ground electrodes were measured and their simulations with due regard to frequency-dependent soil resistivity were implemented by using EMTP program and Matlab modeling. As a consequence, the ground impedance of ground grids combined with the carbon ground electrodes is significantly reduced when the test current is injected at the terminal of the carbon ground electrode. The measured and simulated data for the test ground grids fairly agree with each other. It was found that the proposed method of simulating the frequency-dependent ground impedance is distinguished. The simulation techniques of predicting accurately the ground impedances without actual measurements can be used in the design of grounding systems based on ground grids and the carbon ground electrodes.