• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.569-578
• /
• 2016

With the recent advancement of surveying and technology, the spatial data acquisition rates and precision have been improved continually. As the updates of spatial data are rapid, and the size of data increases in line with the advancing technology, the LOD (Level of Detail) algorithm has been adopted to process data expressions in real time in a streaming format with spatial data divided precisely into separate steps. The existing GRID analysis utilizes the single DEM, as it is, in examining and analyzing all data outside the analysis area as well, which results in extending the analysis time in proportion to the quantity of data. Hence, this study suggests a method to reduce analysis time and data throughput by acquiring and analyzing DEM data necessary for GRID analysis in real time based on the area of analysis and the level of precision, specifically for streaming DEM data, which is utilized mostly for 3D geographic information service.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.742-747
• /
• 2007

In 2-dimensional SCBF (Spherically Convergent Beam Fusion) device, the effect on neutron production rate of the grid cathode geometry was simulated. The motion of Particles was tracked using Monte Carlo Method including the atomic and molecular collision processes and potential distribution was calculated by Finite Element Method, Main processes of the discharge were the ionization of $D_2$ by fast $D_2^+\;ion$. As the number of cathode rings was small and the size of grid cathode decreased, the ion current increased and neutron production rate will also increase. The star mode discharge which is a very important characteristic in SCBF device, was confirmed by the ionization position.

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.174-180
• /
• 2007

In this paper, a simple control method for two-stage utility grid-connected photovoltaic power conditioning systems (PCS) is proposed. This approach enables maximum power point (MPP) tracking control with post-stage inverter current information instead of calculating solar array power, which significantly simplifies the controller and the sensor. Furthermore, there is no feedback loop in the pre-stage converter to control the solar array voltage or current because the MPP tracker drives the converter switch duty cycle. This simple PCS control strategy can reduce the cost and size, and can be utilized with a low cost digital processor. For verification of the proposed control strategy, a 2.5kW two-stage photovoltaic grid-connected PCS hardware which consists of a boost converter cascaded with a single-phase inverter was built and tested.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.103-110
• /
• 2020

In this study, the design and operating strategy of DC home grid with PV, battery, and ultracapacitor have been discussed, The proposed sizing method can find the optimum size of the battery and PV which can reduce yearly utility energy consumption, whereas the control scheme can maintain the DC-bus voltage level of the DC home grid under different operating conditions, where day or night time operation, load and PV power levels, and the maximum current and state-of-charge of batter are considered. In addition, a supervisory power management strategy has been suggested, and its validity has been verified by HILS (hardware in-the-loop simulation) results.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.267-276
• /
• 2004

The modeling methods of routing region used in the automatic placement/routing system are a grid and non-grid. Because the gird method is curbed by its size and a board if the electrical and physical elements on PCB are of small quantity, it has many memories. Therefore, it has demerit which decreases the speed of automatic placement/routing. The Shape-based type, non-grid method, makes the shapes exist as an in dividual element in a memory by using a region-processing method. Each individual element needs very small memory since it has its unique data size. Therefore, this paper aimed to develope the automatic placement/routing system which can automatically place and route the PCB without dissipation of memory at a high speed. To this aim, the auction algorithm method was applied which can make the memories be most rapidly reached from the original point to various destinations. Also, this system was developed by the Visual C++ in the Widows environment of IBM Pentium computer in order to use it in an individual PC system.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.105-116
• /
• 2011

Changes in climate have largely increased concentrated heavy rainfall, which in turn is causing enormous damages to humans and properties. Therefore, the exact relationship and the spatial variability analysis of hydrometeorological elements and characteristic factors is critical elements to reduce the uncertainty in rainfall -runoff model. In this study, radar rainfall grid resolution and grid resolution depending on the topographic factor in rainfall - runoff models were how to respond. In this study, semi-distribution of rainfall-runoff model using the model ModClark of Inje, Gangwon Naerin watershed was used as Gwangdeok RADAR data. The completed ModClark model was calibrated for use DEM of cell size of 30m, 150m, 250m, 350m was chosen for the application, and runoff simulated by the RADAR rainfall data of 500m, 1km, 2km, 5km, 10km from 14 to 17 on July, 2006. According to the resolution of each grid, in order to compare simulation results, the runoff hydrograph has been made and the runoff has also been simulated. As a result, it was highly runoff simulation if the cell size is DEM 30m~150m, RADAR rainfall 500m~2km for peak flow and runoff volume. In the statistical analysis results, if every DEM cell size are 500m and if RADAR rainfall cell size is 30m, relevance of model was higher. Result of sensitivity assessment, high index DEM give effect to result of distributed model. Recently, rainfall -runoff analysis is used lumped model to distributed model. So, this study is expected to make use of the efficiently decision criteria for configurated models.

• Journal of radiological science and technology
• /
• v.10 no.1
• /
• pp.61-67
• /
• 1987

Authors tested the grid functions with various thickness of acryl phantom, radiation field size and diameter of shielding lead. The results are as followed: 1. The characteristic values of grid are affected by phantom thickness, but free from radiation field size in the diagnostic useful range. 2. The quantity of scattered radiation was decreased according to the diameter of shielding lead under 20mm, and then the diameter the smaller the better, in accordance with proposed KS standard. 3. The quantity of primary radiation was increased a little at the 80mm diameter radiation field size, but did not have much differences. Therefore, it was thought that it is needed to limit beam size in case of absolute values in accordance with any standards, but it has no matter to use 100 mm diameter in case of relative values just to campare with.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.5-19
• /
• 2001

We are able to construct and utilize DEM(Digital Elevation Model) throughout the NGIS(National Geographic Information System) project. It is important that interpolation methods and appreciate size of grid for the construction of accurate DEM(Digital Elevation Model). There were several references related to the DEM(Digital Elevation Model) construction method, however they couldn't consider various topographical characteristics in the korea. In this study, we recommended that suitable interpolation method for each topographic element. After dividing Poonggi area into mountain, hill, urban, agricultural land, we constructed DEM(Digital Elevation Model) with various interpolation methods and grid size using 1:5,000 digital map. Then evaluated accuracy using elevation data which extracted from air-photo. The interpolation methods were analyzed and compared for various topographical conditions. As a result, Kriging method was superior to TIN method for all the topographical conditions. Another experiment was performed to examine optimal grid space for DEM with each topographical condition. 10m grid space was most suitable for mountain area and hilly districts, while 30m grid space was most suitable for urban area and farm land.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.152-152
• /
• 2016

We studied the effect of the silver grid size on graphene transparent conducting films for flexible organic solar cells (OSCs). The silver grid was used an assistant layer of the graphene to reduce the sheet resistance of substrates. Silver grid with various graphene sizes for optimizing transmittance and sheet resistance of substrates were fabricated on polyethylene terephthalate (PET) substrates to form the hybrid films. The optimized grid geometry on the single layer graphene (SLG) was the grid dimension $200{\mu}m{\times}200{\mu}m{\times}50nm{\times}2{\mu}m$ (length ${\times}$ width ${\times}$ height ${\times}$ linewidth), where the sheet resistance was $55.73{\Omega}/square$ with the average transmittance of ~ 92.83 % at 550 nm. The properties of the OSCs fabricated using SLG with optimized silver grids on PET substrates show a short circuit current of $10.9mA/cm^2$, an open circuit voltage of 0.58 V, a fill factor of 60.8 %, and a power conversion efficiency (PCE) of 3.9 %. The PCE was improved about 91% than that of the OSCs using the SLG without the silver grid. These results demonstrate that the optimized grid geometry to the based on the graphene transparent electrodes contribute to improving the performance of OSCs.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.9
• /
• pp.24-36
• /
• 1996

In this paper, we discuss the errors in selectivity estimation using the multilevel grid file (MLGF). We first demonstrate that the estimatio errors stem from the uniformity assumption that records are uniformly distributed in their belonging region represented by an entry in a level of an MLGF directory. Bsed on this demonstration, we then investigate five factors affecting the accuracy of estimation: (1) the data distribution in a region (2) the number of records stored in an MLFG (3) the page size, (4) the query region size, and (5) the level of an MLFG directory. Next we present the tendancy of estimation errors according to the change of values for each factor through experiments. The results show that the errors decrease when (1) the distribution of records in a region becomes closer to the uniform one, (2) the number of records in an MLFG increases, (3) the page size decreases, (4) the query region size increases, and (5) the level of an MLFG directory employed as data distribution information becomes lower. After the definition of the granule ratio, the core formula representing the basic relationship between the estimation errors and the above five factors, we finally examine the change of estimation errors according to the change of the values for the granule ratio through experiments. The results indicate that errors tend to be similar depending on the values for the granule ratio regardless of the various changes of the values for the five factors. factors affecting the accuracy of estimation: