• 한국농촌건축학회논문집
• /
• 제24권2호
• /
• pp.29-36
• /
• 2022

This study analyzed the effects of building and greenhouse structural code on the structural design and the greenhouse construction cost. The over-design possibility of greenhouse was analyzed when building structural code was applied using standard smart greenhouse drawings. The possibility of decrease in greenhouse construction cost was investigated if the currently applied building structural code was replaced with greenhouse structural code. As a result of comparing the member sizes with the standard drawings, building structural code was designed with 13%~74% more steel than greenhouse structural code. When building construction estimate was replaced with greenhouse construction estimate, it was possible to reduce the total construction cost of the glass greenhouse by 17% and that of the vinyl greenhouse by 14%. Since there is no standard construction estimate suitable for greenhouses, the wage unit price is set excessively, and the construction cost of the smart greenhouse is increasing. In conclusion, it is necessary to establish greenhouse structural code and greenhouse construction estimate to lower the greenhouse construction cost.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.399-404
• /
• 1999

This study were performed to find the cooling effect and to provide design data during summer season for the Pad& Fan system of greenhouse . The temperature variation along the greenhouse width were analyzed. Also, the effect of the pad location and fan capacity on the cooling of the greenhouse were analyzed. While Pad &Fan systems were operating the temperatures in greenhouse were very different along the meausring locations. It is recommeded that PAD location and FAN capacity should be considered to design the Fan and Pad system in order to provide greenhouse the optimum temperature condition.

• 한국강구조학회 논문집
• /
• 제19권2호
• /
• pp.171-179
• /
• 2007

본 논문은 유전자 알고리즘을 근거한 이산최적설계 알고리즘에 의한 온실구조용 최적설계 프로그램을 개발하였다. 최적기법은 이산화 최적기법에 효과적인 유전자알고리즘을 근거로 하였다.본 연구에서 목적함수는 온실 구조물의 중량이고, 제약조건식은 한계상태설계기준에 대한 설계 제한식이다. 설계변수는 KSD 3760 농업용 아연도강관이다. 온실구조의 경제적인 구조설계나 안정성평가에 대한 기준을 제시하고자 하였다. 또한 온실구조자재의 표준화 및 규격화연구에 기여하고자 하였다. 본 연구의 유전자 알고리즘에 의한 온실구조용 이산화 최적설계 프로그램의 적용을 위해 설계 예를 들었다.

• 한국농촌건축학회논문집
• /
• 제22권1호
• /
• pp.13-20
• /
• 2020

As the number of plastic greenhouses has increased in Korea, the damage from typhoons and snow has also increased. Structural design codes for a disaster-resistant plastic greenhouse have been revised over the last few decades. In particular, the revised code draft in 2017 have changed in many ways compared to the 1995 code. Nevertheless, There is no study of the effect of new design code on plastic greenhouse. Therefore, this study evaluated the safety of plastic greenhouse against wind load according to 1995 and 2017 codes for type 1 houses, which is most commonly built in Jeju, through comparing the analytical results of plastic greenhouses designed by 1995 code and 2017 code draft. The results are as follows. (1) The uplift load due to the negative pressure on the roof of the plastic greenhouse increased significantly in 2017 code draft. (2) Since the existing members could not meet the design requirements, the rafters had to be replaced with members of the same cross-section as the columns. (3) Due to excessive lifting, measures were also needed to prevent lifting at the foundation of the plastic greenhouse.

• 한국농공학회논문집
• /
• 제52권5호
• /
• pp.11-18
• /
• 2010

This study was conducted to provide design data for deciding covering method in double layers greenhouse. The variation of photosynthetic photon flux (PPF) and heat flow in air inflated and conventional double layers greenhouse was analyzed. The PPF of air inflated double covering greenhouse was less than that of conventional greenhouse during summer season because the more PPF comes into conventional greenhouse through roof vent which was rolled up for ventilation. The air inflated double layers covering greenhouse was superior to conventional type in the aspect of controlling inside temperature down owing to lower irradiation. The PPF of air inflated greenhouse was greater than that of conventional greenhouse during winter season because the transmittance of conventional greenhouse decreased by dust collected on inside plastic film nearly closed for insulation. Considering the PPF not sufficient for tomato growing in winter, the air inflated double covering system with the greater transmittance was better than conventional covering system. When the inside air of air inflated greenhouse was injected into space between the double layers of covering, the PPF of air inflated greenhouse was much less than the conventional greenhouse because the transmittance of air inflated double covering decreased due to condensation of highly humidified inside air. It was concluded that the more dried outside air should be used for inflating double layers covering. The heat insulation performance of air inflated double covering system was superior to conventional double covering system when comparing the overall heat transfer coefficients for each covering method. However the differences among the overall heat transfer coefficients depending on difference between inside and outside temperatures of greenhouse were great, it is necessary to conduct additional experiment for investigating the overall heat transfer coefficient to design the double layers covering.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.129-136
• /
• 2014

PURPOSES : This study devotes its energies to estimate greenhouse gas emissions for types of horizontal highway designs. METHODS : This paper suggested two types of road scenarios, scenario 1 is made by the lack of road design consistency. Beside scenario 1, scenario 2 is made by good road design. For comparisons of greenhouse gas emissions, driving simulator was used. RESULTS : Emission rates of road scenario 1 are 1.4 times higher than scenario 2 in the driving simulator. CONCLUSIONS : This study may have important implications for contributing to the application of road alignment technology for reduction of greenhouse gases as quantifying the correlations between greenhouse emissions and various road alignments. Consequently, this study will help road designers determine which roads are best alternatives in the process of choosing the roads in the future in terms of environmental benefits.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.84-89
• /
• 1994

Section forces of greenhouse structures were studied to suggest basic information for the structural design of greenhouses with respect to roof types and support conditions. Structural analyses were performed for pitched and arched roof, and fixed and hinged support under snow loads and wind loads. Followings are the results obtained and are expected to be useful in determining the span length and roof type in greenhouse design. 1. Special considerations might he required for roof design at the heavy snow region, and for the support design at the strong wind region, respectively. 2. Single-span structure was found to be stronger than multi-span structure under the snow load, but the former was found to be weaker than the latter under the wind load. 3. Arched roof structure was expected to be safer than pitched roof structure if the dimensions and loads were equal. 4. Greenhouse orientation and roof slope should be considered in optimum structural design of grrenhouses, because these two factors are closely related with the influence of wind load and snow load.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.393-398
• /
• 1999

The purpose of this study was to investigate the air flow characteristics of the rock bed storage for solar-heated greenhouse design, Heat storage material was gravels and experiments were performed under different outside temperature condition. The results of this study will be used for design of experimental solar-heated greenhouse.

• 생물환경조절학회지
• /
• 제20권1호
• /
• pp.50-57
• /
• 2011

본 연구는 한국형 온실 표준설계도 및 Greenhouse Structure Design Manual(1999)에 의거하여 최대설계 하중을 받는 와이드스팬형파 2-bay벤로형 온실시스템에 대하여 해석적 연구를 진행하였다. 상부구조물을 라멘형식으로 단순화한 구조형식에 BOX형 및 I형 단면을 적용하여 다음과 같은 결과를 얻을 수 있었다. 한국형 유리용실 표준도를 활용하여 라멘형식의 단순화된 와이드스팬형 및 2-bay 온실구조시스템의 안전성 평가결과 기존의 트러스 등의 보강재가 적용되지 않을 경우 안전성확보에 문제가 발생할 수 있음을 확인할 수 있었다. 또한 유리온실 표준도를 라멘형식으로 단순화하고 Greenhouse Structure Design Manual (1999)이 제안하고 있는 최대하중에 대해 경량I형 단면 부재를 적용할 경우 안전성을 확보할 수 있다. 본 연구에서는 경제적인 경량 I형 단면 3가지의 적용성을 평가하였으며, 검토조건에 부합하는 최소 기둥단면($H200{\times}175{\times}3.2{\times}6$)을 제시하고 있다. 와이드스팬형 및 벤로형 온실형식의 안전성평가에서 발생되는 처짐은 매우 작은 값을 나타내고 있으며, 발생되는 응력이 보다 민감하게 발생하는 것을 알 수 있다. 따라서 검토된 온실표준단변형식이 전체적인 구조변형에는 안전하나 응력발생이 일부부재에서 취약함으로 변단면 등을 활용하여 경제성을 확보할 수 있다. 온실의 채광량, 시공성 및 안전성을 고려하여 벤로형 구조시스템이 널리 사용되고 있으며, 지붕높이의 변화를 통하여 보다 경제적인 형식이 개발가능하며, 3-bay 벤로형의 추가적인 연구가 필요하다.