• Composites Research
• /
• v.35 no.2
• /
• pp.80-85
• /
• 2022

This work presents an experiment study to evaluate the nanoparticle adhesion and surface hydrophobicity characteristics of Teflon-polyurethane top coat depending on the number of multi-wall carbon nanotube (MWCNT) coatings, which is a carbon-based hydrophobic particle. In order to measure the adhesion between the nanoparticles and the top coat, adhesion pull-off test was performed with different MWCNT oxidation times. Static contact angle and roughness measurements were carried out to characterize the surface hydrophobic behavior. Through the roughness evaluation, it was confirmed that the carbon nanotubes were wetted in the Teflon-polyurethane top coat, and the degree carbon nanotube wetting was confirmed through a USB-microscope. As a result, it was found that the larger the degree of wetting, the better the adhesion. From the experimental results, as the hydrophobicity of Teflon-polyurethane increased, the adhesive propertydecreased with the number of coatings. It was possible to improve the adhesive force and determine the number of coatings of carbon nanotubes with optimized hydrophobicity.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.667-681
• /
• 2020

Background and objective: Recently, there has been an increasing need for relaxation and familiarity with nature in residential and living spaces faced daily by urban residents, leading to a growing social interest in urban gardens. The aim of this study was to determine how gardens in a city provide physical and social benefits, comparing cases in Korea and overseas. Methods: We used the keywords "garden" and "city" for Korea, and "urban," "garden," and "green" for overseas. We then determined the Korean and overseas research trends in urban gardens by analyzing 63 Korean and 90 overseas articles deemed suitable for this study. Results: As to the types of urban gardens, the most significant type was community gardens, both in Korea and overseas (30.2% and 48.6%, respectively), followed by rooftop gardens in Korea (22.2%) and kitchen gardens overseas (22.2%). Due to the narrow and complex urban structure in Korea, people focus on using rooftop, wall, and alley spaces, and tend to arrange container-type flexible gardens. Overseas there has been a focus on promoting health and reducing food inequality through allotment and kitchen gardens, and a tendency to use a larger area as a fixed form than Korea. In addition, it was found that gardens in urban areas had a positive effect on urban biodiversity. Conclusion: To sum up, gardens in Korea are close to living spaces, and gardens overseas influence the ecosystem with an emphasis on food production. Therefore, creating urban gardens is a method of urban regeneration with a high utility that goes beyond mere food production, both in Korea and overseas, providing comprehensive benefits for the environment (37.73%) and society (62.27%). As such, continuous research on this area of study is needed to create policy guidelines for Korea.

• Development and Reproduction
• /
• v.27 no.2
• /
• pp.91-99
• /
• 2023

The sea cucumber, Apostichopus japonicus, is one of the most valuable aquatic species. The color of body wall and appearance are important for the value of sea cucumbers. To examine expression pattern of long-chain acyl-coenzyme A dehydrogenase (LCAD), nuclear distribution C-containing protein 3 (NUDCD3), and receptor tyrosine kinase Tie-1 (TIE1), previously reported as differently expressed genes during the pigmentation of sea cucumber, we analyzed the temporal profiles of LCAD, NUDCD3, and TIE1 mRNAs in LED-exposed and light-shielded A. japonicus. Real-time quantitative PCR revealed that the LCAD, NUDCD3, and TIE1 mRNAs from the juveniles at 40-60 days post-fertilization (dpf) exhibited increasing patterns as compared to those of an early developmental larva (6-dpf). At 60-dpf juveniles, the LCAD and TIE1 mRNA levels of LED-exposed individuals were higher than those of light-shielded ones, whereas at 40-dpf and 50-dpf juveniles, the NUDCD3 mRNA expression was higher in the light-shielded condition (p<0.05). In the pigmented juveniles (90-dpf), the LCAD and TIE1 mRNA levels tended to show higher levels in red individuals than those in green ones, but there was a conversely higher level of NUDCD3 mRNA in green larva. In situ examination of LCAD and NUDCD3 mRNAs in light-shielded 6-dpf larva revealed that both genes are mainly expressed in the internal organs compared to the body surface. Together, these results may provide insights into the differential gene expression of LCAD, NUDCD3, and TIE1 during pigmentation process of the sea cucumber.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.162-168
• /
• 2011

This study was carried out to investigate the plant growth of several Carex L. plants according to light intensity and soil depth planted on a green wall and roof, and to show basic data for the use of Carex L. plants in various forms. The temperature was dropt more in the green container compared to the normal especially during the genial weather from August to September. The plant growth of Carex testaceae, Carex oshimensis Evergold, and Carex ciliatomarginata Nakai was excellent at light intensity from 0 to $1799\;{\mu}M{\cdot}m^{-2}{\cdot}s^{-1}$, and that of Carex siderosticta Hance, Carex flagellifera Bronzita, Carex ornithopoda Variegata, and Carex morrowii Ice Dance were best in lower light intensity from 0 to $786\;{\mu}M{\cdot}m^{-2}{\cdot}s^{-1}$. The leaf color of the plants changed vividly as the light intensity grew lower and the visible value of the plants increased. There must be more considerations about the pattern changes in additory experiments. The water content in the soil depth of 10 cm was maintained higher than the other treatments because of no drainage layer. Most Carex L. plants grew excellent in the soil depth of 10 cm. However, Carex oshimensis Evergold, Carex siderosticta Hance, and Carex testaceae showed the best plant growth in soil depth 20 cm, and Carex morrowii Ice Dance and Carex ciliatomarginata Nakai in soil depth of 40 cm. Therefore, Carex L. plants could be recommended as materials for green roof because they also grew well in light soil depth of 10~20 cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.468-472
• /
• 2005

In order to prevent adhering of molten glass on a mold wall, the wall is swabbed with lubricant oil before forming. However, the swabbing process can be removed from the entire processes of the glass forming if the mold wall is made of a porous sintered material. The purpose of the present study is to manufacture a sintered material(having a sintered density of $85{\~}90\%$)which is the most appropriate into. plane material for a glass mold. For the research, SUS310L-based coarse powder (${\~}150{\mu}m$) and SUS420J2-based fine powder ($40{\~}50{\mu}m$) were used for the compact materials, and effects of compaction pressure and sintering condition(atmosphere, temperature) were investigated. The results obtained were as fellows. (1) By means of solid phase sintering, a desired sintering density could not be achieved in any case when using a 310L-based powder having a large particle size. (2) When sintering green compacts(compaction pressure of $2ton/cm^2$) in a commercial vacuum furnace(at $1300^{\circ}C$ for 2 hours), the sintered compacts had densities of $6.2g/cm^3(79\%)$ for 310L + 0.03$\%$B, $6.6g/cm^3 (86\%)$ for 420J2, $7.3g/cm^3(95\%)$ for 420J2+(0.03)$\%$B, and $7.6g/cm^3(99\%)$ for 420j2+(0.06)$\%$B, respectively. As a result, it is regarded that sintered compacts having a desired porosity may be achieved by vacuum sintering the 420J2-based powder (low pressure compaction) and the 310L+0.03$\%$B-based powder (high pressure compaction).

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.247-255
• /
• 1998

This study was carried out to investigate changes in the flesh firmness, evolution of ethylene, cell wall components, and degradation and solubilization of polyuronide(PU) and polysaccharide(PS) in green(GP) and mature persimmon(MP) fruits according to testing time of ethylene(50${\mu}\ell$ㆍL$^{-1}$ ). When ethylene was treated in GP and MP, flesh firmness rapidly decreased and it was decreased more GP than MP. When ethylene were treated for 12 hours in GP, production of ethylene began after 3 days. The amount of ethylene product was maximum 16,000 ${\mu}\ell$ㆍL$^{-1}$ at 24 hours of ethylene treatment. However, ethylene was not producted until 7 days after 24 hours ethylene treatment at MP. The content of pectic substances decreased in the distilled- water, 0.05M $Na_2$CO$_3$,4M and 8M KOH-soluble fractions during softening according to increasing time of ethylene treatment. Arabinose and galactose were the major non-cellulosic neutral sugars in the 0.05M CDTA and 0.05M $Na_2$CO$_3$-soluble pectic fractions. Glucose, galactose and xylose were the major non-cellulosic neutral sugars in the 4M KOH- soluble hemicellulosic fraction. High molecular of PU and PS were degraded and solubilized in the distilled-water, 0.05M CDTA 0.05M $Na_2$CO$_3$ and 4M KOH-soluble fractions during time of ethylene treatment.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.97-103
• /
• 2020

This study sets the solar power system installed and applied to the vertical side wall among the photovoltaic systems in the building as the scope of the research. The theoretical background was considered through literature research as a research method, and the current status, trends and characteristics of solar generator design installed and applied to domestic and foreign vertical side walls were then investigated and analyzed cases. As a result, the importance and necessity of photovoltaic generators, potential for power generation and growth were identified, and positive factors and directions were found for improving aestheticity. Based on this point, we would like to propose expected effects that can be applied to photovoltaic system design installed and applied to vertical side walls in the future, and confirm the direction and significance of the improvement of aesthetic quality of the proposal for development of thin film solar cell design technology using green facade design.

• The Korean Journal of Cytopathology
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2000

Amyloid golfer is a rare disease entity that is defined as a symptomatic mass or clinically detectable thyroid enlargement because of amyloid deposition. We present a case of amyloid golfer diagnosed in the fine needle aspiration cytology(FNAC) in a 73-year-old Korean woman presented with nephrotic syndrome and thyroid enlargement. The thyroid function was in normal range. Thyroid scan showed a nodule, $4{\time}2cm$ in the right lobe with underlying diffuse golfer. Aspirates revealed benign looking follicular cells and scattered eosinophilic material. The sections of the cell block showed nodular deposit of eosinophilic hyalinized material in the interfollicular area. It showed apple-green birefringence under polarization with Congo red stain. The renal biopsy also exhibited deposition of eosinophilic materials in the glomeruli and interstitial vascular wall, which were confirmed as amyloidosis. This material was morphologically distinct from the colloid.

• Advances in aircraft and spacecraft science
• /
• v.7 no.5
• /
• pp.425-440
• /
• 2020

The work presented herein is a numerical investigation of the flow field inside a resonant igniter, with the aim of predicting the performances in terms of cavity temperature and noise spectrum. A resonance ignition system represens an attractive solution for the ignition of liquid rocket engines in space missions which require multiple engine re-ignitions, like for example debris removal. Furthermore, the current trend in avoiding toxic propellants leads to the adoption of green propellant which does not show hypergolic properties and so the presence of a reliable ignition system becomes fundamental. Resonant igniters are attractive for in-space thrusters due to the low weight and the absence of an electric power source. However, their performances are strongly influenced by several geometrical and environmental parameters. This motivates the study proposed in this work in which the flow field inside a resonant igniter is numerically investigated. The unsteady compressible Reynolds Averaged Navier-Stokes equations are solved by means of a finite volume scheme and the effects of several wall boundary conditions are investigated (adiabatic, isothermal, radiating). The results are compared with some available experimental data in terms of cavity temperature and noise spectrum.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.34-38
• /
• 2014

Cu-Ni alloys with unidirectionally aligned pores were prepared by freeze-drying process of CuO-NiO/camphene slurry. Camphene slurries with dispersion stability by the addition of oligomeric polyester were frozen at $-25^{\circ}C$, and pores in the frozen specimens were generated by sublimation of the camphene during drying in air. The green bodies were hydrogen-reduced at $300^{\circ}C$ and sintered at $850^{\circ}C$ for 1 h. X-ray diffraction analysis revealed that CuO-NiO composite powders were completely converted to Cu-Ni alloy without any reaction phases by hydrogen reduction. The sintered samples showed large and aligned parallel pores to the camphene growth direction, and small pores in the internal wall of large pores. The pore size and porosity decreased with increase in CuO-NiO content from 5 to 10 vol%. The change of pore characteristics was explained by the degree of powder rearrangement in slurry and the accumulation behavior of powders in the interdendritic spaces of solidified camphene.