• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.172-172
• /
• 2010

In the area of optoelectronic devices based on GaN and related ternary compounds, the two-dimensional system like as quantum wells (QWs) has been investigated as an effective structure for improving the light-emitting efficiency. Generally, the quantum well active regions in III-nitride light-emitting diodes grown on conventional c-plane sapphire substrates have critical problems given by the quantum confined Stark effect (QCSE) due to the effects of strong piezoelectric and spontaneous polarizations. However, the QWs grown on nonpolar templates are free from the QCSE since the polar-axis lies within the growth plane of the template. Also the unique characteristic of linear polarized light emission from nonpolar QW structures is attracting attentions because it is proper to the application of back-light units of liquid crystal display. In this study, we characterized optical properties of the a-plane InGaN/GaN QW structures by temperature-dependent photoluminescence (TDPL) measurements. From the photoluminescence (PL) spectrum measured at 300 K, green emission centered at 520 nm was observed for the QW region. Since indium incorporation on nonpolar QWs is lower than that on c-plane, this high indium-doping on a-plane InGaN QWs is not common. Therefore, the effect of high indium composition on optical properties in a-plane InGaN QWs will be extensively studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.91-94
• /
• 2004

We report on the opto-electronic properties of red, green, and blue poly (fluorene) co-polymer light-emitting devices (PLEDs) fabricated on a flexible plastic substrate. The plastic substrate used has a multi-layer structure with water vapor and oxygen transmission rates of less than $10^{-5}$ g/$cm^2$-day-atm and $10^{-7}$ cc/$cm^2$-day-atm, respectively. We obtained a wide range of color gamut and a maximum emission efficiency of 0.7, 10, and 1.7 cd/A for red, green, and blue PLEDs, respectively. Finally, a simple equivalent circuit model is proposed to simulate PLED current density-voltage characteristics.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.277-281
• /
• 2009

The complex resonant frequency problem of a superconductor patch is formulated in terms of an integral equation which is the kernel of a dyadic Green's function. To include the effect of the superconductivity of the microstrip patch, the surface complex impedance of the superconductor film is introduced using the two fluids model of Gorter and Casimir. The Galerkin procedure is used in the resolution of the electric field integral equation. Numerical results concerning the effect of the operating temperature of a superconductor patch on the characteristics of the antenna are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1433-1436
• /
• 2007

Using a blue emitting DPVBi material and red dopant DCJTB, WOLEDs with and without green emitter C6 added in ETL or HTL have been fabricated. The chromaticity color index of WOLEDs without C6 depends strongly on the doping concentration. In addition, manipulating thickness of emitting layer is similar effect such as controlling weight concentration of dopant. While the white color of WOLEDs with C6 added in ETL or HTL depend on position of C6. WOLED of three colors added green dye have been shown turn-on voltage of 3.25V, and EL efficiency 3.05cd/A @9V, $8102\;cd/m^2$, CIE coordinates (0.30, 0.32).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.814-816
• /
• 2009

We have investigated the effect of host on the device charactistics of green phosphorescent organic light emitting devices consising of mCP, CBP and TPBi. Electrons were confined within the device by inserting hole transport layer between the electro transport and the emitting layer. When the appropriate interlayers were added, the device with TPBI host layer performances were found to be dramatically enhanced, with current efficiency and lifetime of 18cd/A and 18hour.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.81-86
• /
• 2023

Recently, there has been an increased demand for light-emitting diode (LED) due to the growing emphasis on environmental protection. However, the use of GaN-based sapphire in LED manufacturing leads to the generation of defects, such as dislocations caused by lattice mismatch, which ultimately reduces the luminous efficiency of LEDs. Moreover, most inspections for LED semiconductors focus on evaluating the luminous efficiency after packaging. To address these challenges, this paper aims to detect defects at the wafer stage, which could potentially improve the manufacturing process and reduce costs. To achieve this, image processing and deep learning-based defect detection techniques for Sapphire Epi-Wafer used in Green LED manufacturing were developed and compared. Through performance evaluation of each algorithm, it was found that the deep learning approach outperformed the image processing approach in terms of detection accuracy and efficiency.

• 산업공학
• /
• 제16권spc호
• /
• pp.7-13
• /
• 2003

This paper is concerned with a six sigma green belt training program. Comparative studies of existing training programs for three major companies (Samsung Electronics Company, Hyundai Motor Company, and LG Chemical Ltd.) and two consulting firms (Korean Standards Association and Korea Management Association) are made. Based on the comparative studies, a new green belt training program is proposed. The main focus of this program is on manufacturing, specially on cost and waste reductions, yield improvement, and operations with opportunity to improve capacity without major capital expenditure. The green belts take up to 4 or 5 days of intensive, highly quantitative training, roughly corresponding to the five macro phases of the six sigma methodology: define, measure, analyze, improve, and control. The six sigma tool sets for each phase are also specified.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.154-155
• /
• 2019

항만 내 대표적인 하역장비로는 RTG와 YT가 있으며 주로 디젤엔진을 사용하고 있다. 항만의 그린화 및 무인화를 위해 물류장비의 전기동력 전환의 필요성 증가 및 전기동력 충전을 위한 유선 또는 무선 충전기술 등이 고려 되고 있다. 본 논문에서는 항만에서 운영되는 전기식 YT의 운영 패턴을 고려해 수시로 충전이 가능한 무선전력 전송시스템을 제안하였다. 또한 제안한 시스템의 검증을 위해 실험용 시스템을 구축하여 전력전송 용량 및 효율실험 결과를 통하여 타당성을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.156-157
• /
• 2019

경량전철과 같은 대용량 전력 시스템에 무선전력전송 기술을 적용할 때 전력변환장치의 병렬 운전은 필수적이다. 병렬 연결된 전력변환장치의 경우 출력이 공통으로 연결되어 전력을 공급하게 되는데, 이 때 집전 컨버터의 부하균등제어는 각각의 집전 컨버터의 부하 불균형을 막아줌으로써 집전 컨버터의 수명과 효율이 감소하는 것을 막아준다. 본 논문에서는 부하균등제어방법을 적용한 무선 경량전철 시스템을 통해 기존에 제안된 제어기법을 적용하여 검증하였다. 실증시험의 경우 경산에 위치한 한국철도기술연구원 경량전철시험선의 시험용 경량전철을 두 개의 역사를 반복하여 셔틀 운행하여 최대 400kW의 전력을 두 개의 집전 장치가 전력을 균등하게 공급하는 것을 확인 및 분석하여 논문의 타당성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.87-88
• /
• 2016

경전철 차량은 1MW이상의 전력을 요구하기 때문에 단일 인버터 시스템으로 구현할 경우 시스템 부피 및 비용 증가, 효율 감소 등 문제점을 가지게 된다. 이러한 이유로, 수 kW급 인버터 스택을 병렬로 구성하여 대용량 시스템을 구현한다. 본 논문에서는 이러한 대용량 인버터 시스템을 구성하는 스택 개발 사례를 보여주고 있다. 실험을 통하여 개발한 무선급전용 인버터 스택의 성능을 검증한다.