• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.29-41
• /
• 2017

In this study, we used individual trip data to estimate a macroscopic fundamental diagram (MFD) that relates flow (or production) to density (or state) in Daegu metropolitan city. The individual trip data were generated by processing data that were collected from DSRC-based (dedicated short range communication) traffic data collection system. Using the processed individual trip data, we first examined whether the assumptions for MFD are valid, and then the relation between outflow and accumulation was estimated in our study site. As a result, we found that i) the assumptions are valid to construct MFD; and ii) the reproducible and well-defined MFDs exist in the network level.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.679-686
• /
• 2022

In this paper, we implemented an algae removal device that recognizes and removes algae existing in water using Raspberry Pi camera and DO (Dissolved Oxygen) sensor. The Raspberry Pi board recognizes the color of green algae by converting the RGB values obtained from the camera into HSV. Through this, the location of the algae is identified and when the amount of dissolved oxygen's decrease at the location is more than the reference value using the DO sensor, the algae removal device is driven to spray the algae removal solution. Raspberry Pi's camera uses OpenCV, and the motor movement is controlled according to the output value of the DO sensor and the result of the camera's green algae recognition. Algae recognition and spraying of algae removal solution were implemented through Arduino and Raspberry Pi, and the feasibility of the proposed portable algae removal device was verified through experiments.

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.52-56
• /
• 2009

The design method of a four-port stripline circulator with a single ferrite disk is proposed using Green's function method. The four-port circulator gives the flexibility of the design of the communication system. Two cascaded three-port circulators has been used as a four-port circulator. However, if a four-port circulator with a single ferrite disk replace the present four-port circulator, then it will give less weight and volume and so has the advantage in satellite application.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.233-237
• /
• 2012

The technologies of information communication regions are progressing in rapidly. These technologies in today are used in various industry regions. We called it smart fusion. There are various regions such as smart car, smart green city, and smart TV, smart medical industries. Therefore, we described trends and future of smart green city in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.35-43
• /
• 2012

In this paper, a development of agent-based IEDs(Intelligent electronic devices) for integration control of building microgrid in smart green building are proposed. To manage and control this complex energy system of smart green buildings, multi-agent system based networks is needed. Thus, several IEDs for utilizing multi-agent system are developed and modified for the their verification of performance as agent modules functions in the integrated experimental equipment. The good performance of these IED agents are verified from experimental results obtained from seamless bi-directional communication by SOAP/XML protocol between PC agent and IED agent.

• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.64-70
• /
• 2022

In recent years, with the continuous innovation and upgrading of engine software, the real-time rendering technology in film and television has been continuously improved, and the virtual production technology has also developed rapidly. This paper introduces the green screen often used in traditional film production and a virtual production technology based on light-emitting-diode background wall that was proposed and implemented last year. We analyzed the two production methods of virtual production and compared their characteristics. Based on these results, we can better understand the differences and respective advantages of the two production methods. And we also can according to the production budget, production cycle and the creative and technical capabilities of the team make better choices during the production process. We believe virtual production technology will be production in the future to provide a more solid technical guarantee for the development of the film industry, and this work will pave the way for further research on virtual production technology.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.143-150
• /
• 2023

Underwater wireless communication is a challenging issue for realizing the smart aqua-farm and various marine activities for exploring the ocean and environmental monitoring. In comparison to acoustic and radio frequency technologies, the visible light communication is the most promising method to transmit data with a higher speed in complex underwater environments. To send data at a speedier rate, high-performance photodetectors are essentially required to receive blue and/or cyan-blue light that are transmitted from the light sources in a light-fidelity (Li-Fi) system. Here, we fabricated high-performance organic phototransistors (OPTs) based on P-type donor polymer (PTO2) and N-type acceptor small molecule (IT-4F) blend semiconductors. Bulk-heterojunction (BHJ) PTO2:IT-4F photo-active layer has a broad absorption spectrum in the range of 450~550 nm wavelength. Solution-processed OPTs showed a high photo-responsivity >1,000 mA/W, a large photo-sensitivity >10³, a fast response time, and reproducible light-On/Off switching characteristics even under a weak incident light. BHJ organic semiconductors absorbed photons and generated excitons, and efficiently dissociated to electron and hole carriers at the donor-acceptor interface. Printed and flexible OPTs can be widely used as Li-Fi receivers and image sensors for underwater communication and underwater internet of things (UIoTs).

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.297-308
• /
• 2012

This study is intended to estimate the demand for the green health industry market, to seek for the strategies to develop human resources and to provide fundamental data for development of local green health industry specialization programs in the manner of investigating the intentions to participate in and opinions about the green health industry. Data were collected from 190 and surveyed from 5 to 19 in November 2010. Based upon the priority survey and factor analyses of educational contents for development of human resources specializing in the green health industry, there is some difference in the classification of all domains between the two groups, however the results concerning the cognition of the language education of educational contents and the priority of medical tourism marketing are similar between the two groups. As one of the biggest problems with medical tourism is the difficulty of communication during medical examination and treatment, it is desirable to develop professional human resources with global competitiveness based on customized education as well as excellent language skills by the specialized fields of green health industry.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.59-64
• /
• 2012

Visible light communication is a novel way of green communication. In this paper, we present the novel idea of wireless communication services such as indoor navigation systems, where users can tell where they are by detecting a signal from LED lights.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.34-52
• /
• 2019

This paper proposes an intelligent system performing an application with assistance of an Internet of Things (IoT) platform to control a traffic lights system. In our proposed systems, the traffic lights can be remotely controlled through the Internet. Based on IoT platform, the traffic conditions at different intersections of roads are collected and the traffic lights are controlled in a central manner. For the software part, the algorithm is designed based on the green wave theory to maximize the green bandwidth of arterial roads while addressing a challenging issue: the rapid changes of parameters including cycle time, splits, offset, non-fixed vehicles' velocities and traffic flow along arterial roads. The issue typically happens at some areas where the transportation system is not well organized like in Vietnam. For the hardware part, PLC S7-1200 are placed at the intersections for two purposes: to control traffic lights and to collect the parameters and transmit to a host machine at the operation center. For the communication part, the TCP/IP protocol can be done using a Profinet port embedded in the PLC. Some graphical user interface captures are also presented to illustrate the operation of our proposed system.