• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.11-21
• /
• 2021

Virtual reality is currently mainly used in games, but is starting to be applied as a variety of media fields, such as broadcasting and film. Virtual reality provides more fun than reality, and can provide new experiences in areas that cannot be experienced in reality due to the constraints of time, space, and environment. In particular, as the social non-contact arena has increased due to COVID-19, it is being applied to education, health, and medical industries. The contents are further expanding into design and military fields. Therefore, the purpose of this study was to observe the change in distribution of load and pressure felt by the body in the flying state while wearing a short pants harness, which are mainly used in the game and entertainment industry. In the experiment, the average pressure in the flying state was measured by attaching a pressure sensor to the back and front of a human mannequin. As a result, it was confirmed that the load concentrated on the waist in the flying state was 44 N, with a pressure of 1353 kPa. The pressure distribution was concentrated in front of the center of gravity, and was measured was at 98% by the pressure sensors, with an average pressure value of approximately 15 kPa, and a pressure value of approximately 12 kPa at the back, which was measured at 67% by the pressure sensor. The results of the load and pressure distribution measurement are presented as fundamental data to improve the wearability and comfort of harnesses in the future, and are compared to actual measured pressure values by analyzing the clothing pressure in flight through virtual wear of harnesses through the CLO 3D program.

• Computers and Concrete
• /
• 제7권3호
• /
• pp.203-220
• /
• 2010

In the present study, exterior beam-column sub-assemblage from a regular reinforced concrete (RC) building has been considered. Two different types of beam-column sub-assemblages from existing RC building have been considered, i.e., gravity load designed ('GLD'), and seismically designed but without any ductile detailing ('NonDuctile'). Hence, both the cases represent the under-designed structure at different time frame span before the introduction of ductile detailing. For designing 'NonDuctile' structure, Eurocode and Indian Standard were considered. Non-linear finite element (FE) program has been employed for analysing the sub-assemblages under cyclic loading. FE models were developed using quadratic concrete brick elements with embedded truss elements to represent reinforcements. It has been found that the results obtained from the numerical analysis are well corroborated with that of experimental results. Using the validated numerical models, it was proposed to correlate the energy dissipation from numerical analysis to that from experimental analysis. Numerical models would be helpful in practice to evaluate the seismic performance of the critical sub-assemblages prior to design decisions. Further, using the numerical studies, performance of the sub-assemblages with variation of axial load ratios (ratio is defined by applied axial load divided by axial strength) has been studied since many researchers have brought out inconsistent observations on role of axial load in changing strength and energy dissipation under cyclic load.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.274-281
• /
• 2002

In this study a analytical model for a structure with buckling-restrained unbonded knee-braces is proposed, and a performance-based seismic design procedure for such a system Is provided. The proposed structure system has advantage of simplifying the structural design procedure in that the hinge-connected main structural members, such as beams and columns, are designed only for gravity loads, and all the lateral seismic load is resisted by the braces. The design procedure is based on the concept of equivalent damping, and is implemented to the capacity spectrum method. Parametric study is performed with design variables such as yield stress and cross-sectional area of knee-braces to find out proper slope of the braces.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.42-51
• /
• 2018

해상풍력 지지구조물은 설치과정에서 수직도 오차가 발생하여 풍력발전기 전체 구조의 안전성이 저하될 수 있다. 따라서, 본 논문에서는 콘크리트 중력식 해상풍력 연결부에서 PS 앵커와 앵커체결구 그라우트를 사용하여 수직도를 조정할 수 있는 방안에 대한 연구를 수행하였다. 연결부는 5MW급 해상풍력 지지구조물에서 발생한 수직도 오차를 최대 $0.5^{\circ}$까지 보정하는 것을 목표로 하였다. 우선, 수직도 조정이 가능한 해상풍력 연결부에 대해 주요 부재별 설계안과 설계절차를 제안하고, 제주도 해상지역을 대상으로 설계 제원을 산출하였다. 그 후, 설계 제원에 대해 비선형 3차원 유한요소해석을 수행하여 설계안의 적정성을 검토하였다. 검토 결과, 하중 전달 메커니즘과 연결부 발생 응력 확인을 통해 제안 설계안은 $0.5^{\circ}$의 수직도 오차를 보정하여도 안전하다고 판단하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1655-1658
• /
• 2003

The application area of parallel mechanism is limited in spite of many advantages of that because the workspace of platform is a very small. Thus enlargement of workspace is important issue in design of parallel mechanism. In this paper a parallel mechanism design method is described using commercial simulation program. Firstly strokes of the assembled parallel mechanism's active joints are simulated from kinetic simulation mode to get required workspace, Secondly, dynamic parameters(velocity, acceleration, force, moment) are simulated for the gravity, friction and exit load. Finally, workspace of moving platform is displayed and workspace of area is simulated by motion analysis. The results of this paper will help engineer to design parallel mechanism with optimize workspace.

• 항공우주기술
• /
• 제1권1호
• /
• pp.8-27
• /
• 2002

본 연구에서는 현재 개발중에 있는 복합재료 선미익 항공기의 날개에 작용하는 하중해석을 수행하였다. 중량, 공력계수, 구조설계속도, 하중 등을 계산하기 위해 사용된 Tool은 Excel에서 운용되는 Visual Basic 프로그램으로 계산에 많은 도움을 주었다. 하중해석에 기본적으로 요구되는 항공기의 형상치수, 부품의 종류 및 중량 그리고 좌표계 등은 Catia 모델링, 실제측정 또는 재료밀도 값 등을 이용해 구하였으며, 이들 자료를 통하여 항공기의 중량, 무게중심, 관성모멘트, 구조설계속도, 날개의 하중분포, 힘과 모멘트 등을 계산하였다. 또한 항공기의 날개 및 동체의 임계하중 조건을 선정하는데 필수적인 항공기의 V-n 선도를 도시하였으며, 이 V-n 선도는 항공기의 최대중량 2,573 파운드 및 해면고도조건에서 설계속도 $V_A$, $V_C$, $V_D$ 및 하중계수 +3.8G, -1.52G에 대한 비행범위를 제시하고 있다. 앞으로는 V-n 선도로부터 선정된 임계하중을 이용하여 해석된 동체 및 날개에 대한 하중을 제시하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.26-29
• /
• 2006

A flat plate-column connection is susceptible to brittle punching shear failure, which may result in the necessity of shear reinforcement. In present study, experimental tests were performed to study the capacity of slab-column connections strengthened with lattice, stud rail, shear band and stirrup under gravity and cyclic lateral load. Among them, the capacity of the specimens with lattice are superior to the others due to the truss action of the lattice bars and dowel action of the longitudinal bars as well as the shear resistance of the web re-bar. On the other hand, the strengths of the specimens with stud rail, shear band and stirrup are lower than the estimated strength by the ACI, therefore design formulas of the ACI are needed to revise.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.205-211
• /
• 2016

This paper addresses the key technologies for supertall building construction based on the Lotte World Tower project in Korea. First, the mega-mat foundation construction technologies are shown, including ultra-low heat concrete, heat of hydration control programs, and the logistics plan. Then, high strength concrete technologies of 50~80 MPa are introduced and discussed within the context of the highest pumping record in Korea at 514.25 meters. Structural design concepts of gravity load and lateral force resistance systems are introduced, along with surveying systems using GNSS and temporary installation plans of special heavy equipment like tower cranes, hoists, and high pressure concrete pumps. If it is possible to coordinate these key technologies and others, optimizing for the building's design and construction, supertall building construction can be successfully completed.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.267-276
• /
• 2014

Wharfs are essential to shipping and support very large gravity loads on both a short-term and long-term basis which cause quite large seismic internal forces. Therefore, these structures are vulnerable to seismic activities. As they are supported on vertical and/or batter piles, soil-pile interaction effects under earthquake events have a great importance in seismic resistance which is not yet fully understood. Seismic design codes have become more stringent and suggest the use of new design methods, such as Performance Based Design principles. According to Turkish Code for Coastal and Port Structures (TCCS 2008), the interaction between soil and pile should somehow be considered in the nonlinear analysis in an accurate manner. This study aims to explore the lateral load carrying capacity of recently designed wharf structures considering soil-pile interaction effects for different soil conditions. For this purpose, nonlinear structure analysis according to TCCS (2008) has been performed comparing simplified and detailed modeling results.

• 한국항공우주학회지
• /
• 제46권10호
• /
• pp.845-855
• /
• 2018

최대 이륙중량 55 kg에 최대 순항속도가 180 km/h이고 수직이착륙이 가능한 쿼드 틸트 프롭로터 무인기에 적용할 프롭-블레이드 단면 설계를 수행하였다. 먼저 프롭-블레이드 단면 설계수행을 위한 설계 프로세스를 수립하고 단면 설계에 필요한 요구도를 식별하였으며 식별된 요구도 만족을 위한 단면 설계를 수행하였다. 단면 설계 결과를 분석하기 위하여 유한요소 단면해석 프로그램을 활용하여 인장/굽힘/뒤틀림 강성 및 단위길이 당 중량, 탄성 축 등을 포함한 주요설계 인자들을 도출하였으며, 이 과정에서 프롭-블레이드의 설계 중량을 예측하였다. 그리고 도출된 설계 인자들을 로터시스템 통합 해석 프로그램에 적용하여 프롭-블레이드 운영 환경에서의 동적 안정성을 분석하였으며, 로터시스템 통합 해석 프로그램을 통해 분석된 프롭-블레이드 하중을 활용하여 2차원 단면 구조 해석을 수행하여 프롭-블레이드 구조 안전성을 확인하였다. 이러한 단면 설계/해석 과정에서 설계 요구도를 만족시키지 못하거나 다른 구성품에 부정적 영향을 준 설계 결과에 대해서는 설계 변경을 수행하였으며, 이를 통해 요구도를 만족시켰다.