• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.47-50
• /
• 1987

There are various holographic recording materials, such as Dichromated Gelatin, Silver Halide, Thermoplastic, Photoresist. In this paper especially, we used Photoresist to make the phase holographic grating. Deep-groove diffractive grating formed in relatively thin holographic recording material is to express high diffraction efficiency. Phase holographic grating recorded In photoresist can be used very practical because it has the high diffraction efficiency, and it is possible to make a replication easily. So, it has the merit in recording the optical holographic grating than any other materials.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.634-641
• /
• 2022

A frequency stable and tunable optoelectronic oscillator (OEO) incorporating an optical phase shifter and a phase-shifted fiber Bragg grating (PS-FBG) is designed and analyzed. The frequency tunability of the OEO can be realized by using a tunable microwave photonic bandpass filter consisting of a PS-FBG, a phase modulator. The optical phase compensation loop is used to compensate for the phase variations of the RF signal from the OEO by adjusting an optical phase shifter. Simulation results demonstrate that the output RF signals of the OEO can be tuned in a frequency range of 118 MHz to 24.092 GHz. When the ambient temperature fluctuates within ±3.9 ℃, the frequency drifts of the output RF signals are less than 68 Hz, the side-mode suppression ratios are more than 69.39 dB, and the phase noise is less than -92.49 dBc/Hz at a 10 kHz offset frequency.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.96-102
• /
• 1998

In this study, the theory and application of phase-shifting shadow moire topography is focused on the non-contact measurement of object surfaces for practical use in the field of production engineering. Shadow moire topography has been studied during last few decades in the area of the optical physics, and now its mathmatical theory has been established. Generally, in case of the classical shadow moire topography, the sensitivity is a few tenths of millimeter in best cases. Here we tried the application of phase-shifting method to the conventional shadow moire topography. But the reference grating and the deformed grating are mutually dependent because it is impossible to obtain uniform phase shifts on the whole Held. Therefore it is difficult to use a phase-shifting method in shadow moire topography. However, it was shown that constant phase-shifting was able to be measured by moving both the grating and light source. Finally we obtained a better result by using this procedure and applied the phase-shifting shadow moire to three dimensional object measurement.

• 한국광학회지
• /
• 제14권4호
• /
• pp.392-398
• /
• 2003

구면 거울을 정밀하고 정확하게 측정할 수 있는 위상천이 회절격자 간섭계를 제시한다. 간섭계는 하나의 회절격자를 이용하여 간섭계의 기준광과 측정광을 분할하고, 다시 결합시켜 간섭무늬를 생성시키고 위상천이 시키는 간단한 구조로 설계되었다. 광원으로부터의 광을 큰 수치구경인 고정도의 집속렌즈의 초점에 위치한 회절격자 위에 집속하여 반사회절된 파면을 기준파면과 측정파면으로 사용한다 부가적인 기준면이 없이 회절격자 위의 매우 작은 영역이 기준면을 대신하므로 시스템 오차가 작다. 광섬유 형태의 공초점현미경 구조를 광원과 집속렌즈 사이에 설치하여 집속렌즈와 회절격자사이의 정렬오차를 최소화 하였다. 회절격자를 광축에 수직한 방향으로 이송함으로써 기준파면과 측정파면사이에 상대적인 위상천이를 일으켜서 일련의 위상천이된 간섭무늬를 쉽게 획득할 수 있다. 간섭계를 제작하고, 결상렌즈와 CCD를 이용해서 얻은 위상천이된 대상구면 거울의 간섭무늬들을 해석하여 전체적인 간섭계 시스템의 성능을 평가해 보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.421-424
• /
• 2002

The 3-D measurement using a sinusoidal grating pattern projection is very attractive because of its high measuring speed and high sensitivity. When a sinusoidal amplitude grating was projected on an object, the surface-height distribution of the object is translated into a phase distribution of the deformed grating image. The phase-acquisition algorithms are so sufficiently simple that high-resolution phase maps using a CCD camera can be generated in a short time. The PMP technique is discussed, and the analysis of the systematic errors, the calibration procedure designed to determined the optimal setting of the measurement parameters is illustrated. Results of measurements and calibrations on the measurement plane objects are described.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.401-407
• /
• 2019

Polymeric optical waveguide devices with Bragg gratings have been investigated, for implementing tunable lasers and wavelength filters used in wavelength-division-multiplexed optical communication systems. Owing to the excellent thermo-optic effect of these polymers, wavelength tuning is possible over a wide range, which is difficult to achieve using other optical materials. In this study the phase-mask technology, which has advantages over the conventional interferometeric method, was introduced to facilitate the fabrication of Bragg gratings in polymeric optical waveguide devices. An optical setup capable of fabricating multiple Bragg gratings simultaneously on a 4-inch silicon wafer was constructed, using a 442-nm laser and phase mask. During fabrication, some of the diffracted light in the phase mask was totally reflected inside the mask, which affected the quality of the Bragg grating adversely, so experiments were conducted to solve this issue. To verify grating uniformity, two types of wavelength-filtering devices were fabricated using the phase-mask lithography, and their reflection and transmission spectra were measured. From the results, we confirmed that the phase-mask method provides good uniformity, and may be applied for mass production of polymer Bragg-grating waveguide devices.

• 한국광학회지
• /
• 제14권6호
• /
• pp.606-612
• /
• 2003

위상형 직선격자에 가간섭 광원인 레이저 광을 조명하였을 때 이 격자가 렌즈없이 회절에 의하여 결상되는 자체결상 현상(또는 렌즈없는 결상)을 회절이론으로 해석하고 실험적으로 조사하였다. 위상형 격자의 위상분포가 강도분포로 바뀌면서 1:1 로 결상하는 자체결상거리( $Z_{T,a}$)를 진폭형 직선격자의 자체결상시 정의되는 자체결상거리 $z_{T,a}$를 이용하여(4n-3) $z_{T,a}$/4(n=양의 정수)와 같이 새로이 정의하였다. 실험적으로 $z_{T,p}$= $z_{T,a}$/4와 $z_{T,p}$=5 $z_{T,a}$/4에서 위상형 직선격자를 이용하여 자체결상거리에서 자체결상이 되는 것을 확인하였으며, $z_{T,p}$=3 $z_{T,a}$/4위치에서는 이 자체결상된 상의 위상이 반전되는 현상도 동시에 관찰하였다. 이러한 자체결상시 격자의 수에 따라 자체결상된 상의 가시도를 FFT(fast Fourier transform)로 처리하여 측정한 결과, 위상형 직선격자는 15 개 이상의 직선격자들로 구성되어야만 자체결상된 상의 가시도가 최대값 0.10 근처에서 일정하게 유지됨을 알 수 있었다.일정하게 유지됨을 알 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.175-180
• /
• 1999

Generally, When we measure of object 3D surfaces with phase shifting shadow moire method, it is use of optical system consist of light source, grating, and ccd camera. At this time, it is important parameter that vertical distance of grating and camera, grating and light source, and horizontal distance of camera and light source. When use camera consist of complex lens vertical distance of grating and camera is unknown parameter. From this cause equivalent wave length of moire fringe is uncertain. In this study, We exactly obtain a vertical distance of grating and camera so improve on measurement accuracy.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.697-700
• /
• 2004

We propose a method that realizes the modified illumination by implementing a binary phase grating at the backside of a photomask. By modeling the relationship between the shape of a grating on the photomask and the light intensity at the pupil plane, we developed a program named MIDAS that finds the optimum grating pattern with a stochastic approach. After applying the program to several examples, we found that the program finds the grating pattern for the modified illumination that we want. By applying the grating at the backside of a photomask, the light efficiency of modified illumination may be improved.