• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.371-374
• /
• 2011

In this paper, a software development for design of the small photovoltaic system which is used to LED lighting is presented. For optimal design of photovoltaic systems, the operating power consumption of the LED load is considered to estimate the capacity of the solar module and battery. In order to give system design engineers a high ease of use, the software tool provides a graphical user interface and monitoring function to check operation of the system prior to installation.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.293-295
• /
• 2001

This paper describes an interactive educational software developed at Konkuk University. This software provides an educational opportunity for electrical engineering students at the junior level to expand their knowledge about fault analysis in power systems. The developed educational software has three main modules: 1) Z-building, 2) setting the type and location of the fault, 3) displaying the calculated fault currents, according to the given simulation options. The main features of this tool are the diversification of acquisition network data, the function of learning about the z-building procedures, and the dynamic display function of state vectors-all voltage/current phasor. To verity the effectiveness of the developed educational software, some case studies are performed.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.2
• /
• pp.128-135
• /
• 2000

Purpose : The aim of this study is to develope the Magnetic Resonance Spectroscopy(MRS) data processing S/W which plays an important role as a diagnostic tool in clinical field. Materials and methods : Post-processing software of MRS based on graphical user interface(GUI) under windows operating system of personal computer(PC) was developed using MATLAB(Mathwork, U.S.A.). This tool contains many functions to increase the quality of spectrum data such as DC correction, zero filling, line broadening, Gauss-Lorentzian filtering, phase correction, etc. And we obtained the normal human brain $^1H$ MRS data from parietal white matter, basal ganglia and occipital grey matter region using 1.5T Gyroscan ACS-NT R6 (philips, Amsterdam, Netherland) MRS package. The analysis of the MRS peaks were performed by obtaining the ratio of peak area. Results : The peak ratios of NAA/Cr, Cho/Cr, MI/Cr for the different MRS machines have a little different values. But these peak ratios were not significantly different between different echo time MRS peak ratios in the same machine (p<0.05). Conclusion : MRS post-processing S/W based on GUI using PC was developed and applied to the analysis of normal human brain $^1H$ MRS. This independent MRS processing job increases the performance and throughput of patient scan of main console. Finally, we suggest that the database for normal in-yivo human MRS data should be obtained before clinical applications.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1928-1934
• /
• 2014

Induction motors are widely used due to their rugged, robust and easy to care features. Since they are heavily used in industry, testing of three phase induction motors have play a vital role. In order to determine motor equivalent circuit parameters, efficiency of motor, squirrel caged laboratory sized an induction motor test setup is prepared. It is suitable for the induction motor with the frame size of 100 and 112. A virtual Instrumentation typed engineering workbench (called as LabVIEW) software packet, is utilized as a graphical user interface program. Motor input power is measured by measuring the input voltage, current and power factor with the help of hall effect typed voltage and current transformers. Also, the output power is measured by measuring the speed and torque with the help of an encoder and torque sensor. All outputs of the voltage and current transformer, encoder and temperature, torque sensors are given to the Data Acquisition Card (DAQ) which acquires the data for processing and then the equivalent circuit parameters, efficiency, performance and loading characteristics are found out, using LabVIEW based user interface. It is suggested to use this test rig for the quality control of produced motors in industry, and an educational experiment setup in the school laboratories.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1069-1078
• /
• 2014

This study presents the design and implementation of a web-based remote laboratory for a multi-mode single-leg power converter, which is a topic in advanced power electronics course. The proposed laboratory includes an experimental test rig with a multi-mode single-leg power converter and its driver circuits, a measurement board, a control platform, and a LabVIEW-based user interface program that is operated in the server computer. Given that the proposed web-based remote laboratory is based on client/server architecture, the experimental test rig can be controlled by a client computer with Internet connection and a standard web browser. Although the multi-mode single-leg power converter can work at four different modes (main boost, buck-boost, boost-boost, and battery boost modes), only the buck-boost mode is used in the experiment because of page limit. Users can choose the control structure, control parameters, and reference values, as well as obtain graphical results from the user interface software. Consequently, the feedbacks received from students who conducted remote laboratory studies indicate that the proposed laboratory is a useful tool for both remote and traditional education.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.224-226
• /
• 2017

This paper introduces the structure and the function of software developed to manage high temperature components of gas turbine for combined cycle power generation. In the case of high-temperature parts, the frequency of repair, regeneration and replacement is high. Therefore, the economic efficiency can be greatly improved through efficient management. In addition, the program provides a window type interface, which makes it easier for the user to use and can be extended to the whole system parts by expanding the program.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.442-449
• /
• 2004

As underwater robotic vehicles (URVs) become attractive for more sophisticated underwater tasks, the demand of high performance in terms of accuracy and dexterity has been increased. An autonomous underwater robotic vehicle, ODIN (Omni-Directional Intelligent Navigator) was designed and built at the Autonomous Systems Laboratory of the University of Hawaii in 1991. Since 1991, various studies were conducted on ODIN and have contributed to the advancement in underwater robotics. Its refurbished model ODIN II was based on VxWorks in VMEbus. Recently, ODIN was born again as a PC based system, ODIN III with unique features such as new vehicle system software architecture with an objective-oriented concept, a graphical user interface, and an independent and modular structure using a Dynamic Linking Library (DLL) based on the Windows operating system. ODIN III software architecture offers an ideal environment where various studies for advanced URV technology can be conducted. This paper describes software architecture of ODIN III and presents initial experimental results of fine motion control on ODIN III.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.4
• /
• pp.408-417
• /
• 2021

This paper describes the quality attributes of an integrated simulation software for weapon systems named Advanced distributed simulation environment(AddSIM). AddSIM is developed as a key enabler for Defense Modeling & Simulation(M&S) systems which simulate battlefields and used for battle experiments, analyses, military exercises, training, etc. AddSIM shall provide a standard simulation framework of the next Defense M&S systems. Therefore AddSIM shall satisfy not only functional but also quality requirements such as availability, modifiability, performance, testability, usability, and others. AddSIM consists of operating softwares of hierarchical components including graphical user interface, simulation engines, and support services(natural environment model, math utility, etc.), and separated weapon system models executable on the operating softwares. The relation between software architectures and their quality attributes are summarized from previous works. And the AddSIM architecture and its achievements in the aspect of quality attributes are reviewed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.881-885
• /
• 2002

This paper presents the performance and the algorithm of a 1/3-octave band spectrum control system. The system is developed to provide various spectrums in a high intensity acoustic chamber. The required spectrum, which usually comes from launch vehicle company, starts from 25Hz band and ends 10kHz band. Automatic spectrum control system is preferred since the system requires short settling time to guarantee the safety of test objects and to reduce the amount of operating gas. The developed system adapted a PCI data-acquisition/signal-generation board installed in a personal computer to implement whole control logic. The control software used three cascade digital Butterworth filters using software. The filers are designed following ANSI S1.11 standard to implement 1/3 octave band filter bank. The graphical user interface of the system guides the user to follow standard operation procedure. The averaged control spectrum showed less than 0.05 dB in every running 1/3-octave band.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.