• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.3918-3934
• /
• 2017

This paper presents a viewport resolution scaling technique to reduce power consumption in mobile graphic processing units (GPUs). This technique controls the rendering resolution of applications in proportion to the resolution factor. In the mobile environment, it is essential to find an effective resolution factor to achieve low power consumption because both the resolution and power consumption of a GPU are in mutual trade-off. This paper presents a resolution factor that can minimize image quality degradation and gain power reduction. For this purpose, software and hardware viewport resolution scaling techniques are applied in the Android environment. Then, the correlation between image quality and power consumption is analyzed according to the resolution factor by conducting a benchmark analysis in the real commercial environment. Experimental results show that the power consumption decreased by 36.96% on average by the hardware viewport resolution scaling technique.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.136-145
• /
• 2014

This article has compared the level of activities of occupational safety and health in workplace among sub-sectors of manufacturing industry in order to set the priority for policy intervention. Data of manufacturing industry in the survey on the current status of occupational safety and health was used with factor analysis and radar graphic method. Authors have categorized sub-sectors of manufacturing industry into four categories, attained group, active group, neglected group, and passive group based on injury rate, level of safety and health activities. The neglected group may be the first target group for occupational safety and health policy guiding some detailed occupational safety and health activities. Limitation of this study is that cross sectional data was analyzed. The long term effect could not be analyzed.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.26-34
• /
• 2002

Daylighting in building is very important as it has an effect on work performance as well as on their visual health. It is also regarded as a good energy conservation measure in saving energy used for lighting. There are many daylighting evaluation tools such as empirical equations, tables, nomograms, diagrams, protractors, computer simulation, scale models. This study conducted initial daylight measurements to analyze luminous environment in classrooms of elementary school and comparative analysis on three daylighting evaluation tools, such as daylight factor calculation formula, the graphic method with BRE Protractor and computer simulation with Adeline 3.0. It is found that the computer simulation tool produced the closest result to actual measurements of luminous environment in elementary school classroom, and the other simplified tools made appropriate results so that they can be used in the early stage of daylighting design process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.169-171
• /
• 1996

In this paper, we have developed bus load forecasting system (BUSLOF) based on Windows 95. It has been developed for the secure operation of electric power system. It forecasts regional load and bus load using regional distribution factor(RDF) and bus distribution factor (BDF) which are calculated from bus load in the past. It is equipped with graphic user interface(GUI) which enables a user to easily access to the system. The performance of the developed system is estimated in sample data.

• 한국인터넷방송통신학회논문지
• /
• 제18권4호
• /
• pp.37-42
• /
• 2018

디지털 영상 제작 기술의 발전으로 입체 영상 기술의 개발도 활발히 이루어지고 있으며 이에 따라 입체 영상을 탑재하기 위한 첨단 디스플레이의 연구 및 개발도 동일하게 진행되고 있다. 3D 영상 시청 시 발생할 수 있는 다양한 문제점이 제시되고 있는데 시청자는 인위적 방식으로 제공되는 영상의 깊이감을 지각하면서 시각피로를 경험하기에 시각피로와 같은 부정적 휴먼 팩터가 가장 대두되는 이슈 중 하나이며, 3D 영상의 지속적 유지에 영향을 주는 요인이라 할 수 있다. 그러므로 2D 영상에서 제공되는 그래픽 영상 중 깊이감에 영향을 주는 요인을 파악하고 이를 통한 영상 처리 방법을 개발하여 시각 피로감 없는 입체 영상을 재현할 수 있다는 가정 아래 깊이감 관련 실험을 진행하고 이를 분석하였다. 이를 위해 깊이감 관련 요인 중 질감, 색온도, 대비비를 차등적으로 그래픽 영상에 적용하여 깊이감에 가장 큰 요인에 대해 분석하고 아노바 분산분석을 통해 교호작용을 검증하였다. 본 연구에서 진행된 실험결과를 분석하여 깊이감과 관련 있는 요인의 유의미 여부를 정의하고 깊이감 향상을 위한 방안을 제시한다.

• 대한교통학회지
• /
• 제6권2호
• /
• pp.35-48
• /
• 1988

Amongst various analytic methods of internal structure of city, the factor analysis method which uses O-D matrix data has some merits and characteristics compared to other methods. 1) It is possible to find one certain interaction and flow pattern between traffic zones with in a city through reanalyzing O-D data which is too complex to grasp specific meaning or pattern of flow systems. 2) It can be easily visualized the traffic flow pattern by using adequate graphic techniques, and also can clarify the functional areas whose interaction linkages are significantly strong enough between each other. In this study, the taxi traffic O-D data between 42 traffic zones in Kwang-ju city was reanalyzied by varimax rotated factor analysis methods. As a result, four factors that have significant level factor loading (over 0.5 ) and factor score (over 1.0) were sorted out. so to speak four different functional areas were clarified in Kwang-ju city, of the West, the East, the south, and the North functional areas whose interaction linkages are significantly strong enough between each other. In the study, the taxi traffic O-D data between 42 traffic zones in Kwang-ju city was reanalyzied by varimax rotated factor analysis methods. As a result, four factors that have significant level factor loading (over 0.5) and factor score 9over 1.0) were sorted out. so to speak four different functional areas were clarified in Kwang-ju city, of the West, the East, the South, and the North functional area, then these four functional areas are almost coincided with citizen's general conception of community division and administrative district. Accordingly the factor analysis methods using traffic data seems to proved to be very accurate and useful analytic instruments for analyzing flow pattern and clarifying functional areas of city, and believed to provide basic informations and criteria for practical urban land use planning and transportation planning.

• Computers and Concrete
• /
• 제31권5호
• /
• pp.443-455
• /
• 2023

This is a research analyses on the bearing capacity at a pile tip embedded in rock. The aim is to propose a shape coefficient for an analytical solution and to investigate the influence of the plastic flow law on the problem. For this purpose, the finite difference method is used to analyze the bearing capacity of various types and states of rock masses, assuming the Hoek & Brown failure criterion, by considering both plane strain and an axisymmetric model. Different geometrical configurations were adopted for this analysis. First, the axisymmetric numerical results were compared with those obtained from the plane strain analytical solution. Then the pile shape influence on the bearing capacity was studied. A shape factor is now proposed. Furthermore, an evaluation was done on the influence of the plastic flow law on the pile tip bearing capacity. Associative flow and non-associative flow with null dilatancy were considered, resulting in a proposed correlation. A total of 324 cases were simulated, performing a sensitivity analysis on the results and using the graphic output of vertical displacement and maximum principal stress to understand how the failure mechanism occurs in the numerical model.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.728-737
• /
• 2021

그동안 방송CG는 해체·변화·왜곡의 과정을 거듭하면서, 방송프로그램에서의 방송CG는 '시간성'과 '조형성'이라는 확대된 배경을 활용한다. 이를 통해 전달하고자 하는 의미를 입체적으로 표현함으로써 인간의 공감각에 호소하는 시청각적 언어를 창조하는 것이다. 방송CG가 단순한 지시적, 정보 전달적인 방송그래픽의 운용을 넘어, 가독성과 조형성을 고려한 영상의 순수한 미적가치와 감성을 증대시키고, 이를 통한 방송프로그램의 시청각정보 완성미를 도출하며 매우 중요한 요소로 작용한다. 따라서 본 논문에서는 기존의 지역방송사에서의 방송CG제작과 활용방법에서 나타난 결과물들을 살펴보고 방송프로그램 유형별 사례분석 통해 그동안 불가피하게 직면했던 지역 방송사들의 CG제작 및 활용의 한계점들을 파악하고, 이를 보완하기 위한 절충선이 되는 모델을 도출하고자 한다. 그리고 지역 방송프로그램에 보다 적극적이고 실용적으로 적용될 수 있는 방안을 제시하고자 한다. 이러한 문제해결을 위해 본 연구에서는 먼저 "방송프로그램에서의 방송CG제작 활용 사례분석"에 대해서 살펴보고, 그 다음으로 "지역 방송사들의 방송CG제작 방법과 활용의 문제점 파악을 통해 보다 효율적인 방송CG제작기법 및 적극적인 활용방법 등을 제언"하고자 한다. 또한 본 연구의 결과가 지역방송사들의 방송프로그램제작의 기술적인 관점과 방송CG제작을 담당하고 있는 방송그래픽디자이너들에게 새로운 역할과 실용적인 방송CG제작모델 정립에 기여할 것으로 기대된다.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.527-534
• /
• 2005

The purpose of this research is to study face images according to color of make-up was made by computer graphic simulation. The various facial images can be helpful for choosing suitable make-up color planning. In order to find out the differences of face images by make-up color, three different foundations and seven eye-shadows, six lips were applied on the round face model. Make-up Image Scale was used the scale of seven point modified the S-D method. Data were analyzed by Varimax perpendicular rotation method, Duncan's Multiple Range Test, Three-way ANOVA. As the result of make-up image perception analysis, a factor structure was divided into mildness, modernness, elegance, unique. The factor of mildness, modernness, unique affected on the foundation color. Foundation color was found out to be influential variable to distinguish color perception abilities. Also, the foundation, eye-shadow, lip color were influenced interactively on the perception of elegance factor. Pink color was important color, influenced on the mildness factor. Gray and purple color were influenced on the modernness factor. Mildness factor was perceived as the most bright foundation but unique factor was perceived as the most dark foundation. Then, the foundation, eye-shadow, lip color were influenced interactively on the perception of facial images. The results can be effectively applied to today's marketing and color design management which is focused on the product's emotional image in customer's mind.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.663-671
• /
• 2008

This paper presents a real-time haptic rendering method for multi-contact interaction with virtual environments. Haptic systems often employ physics-based deformation models such as finite-element models and mass-spring models which demand heavy computational overhead. The haptic system can be designed to have two sampling times, T and JT, for the haptic loop and the graphic loop, respectively. A multi-rate output-estimation with an exponential forgetting factor is proposed to implement real-time haptic rendering for the haptic systems with two sampling rates. The computational burden of the output-estimation increases rapidly as the number of contact points increases. To reduce the computation of the estimation, the multi-rate output-estimation with reduced parameters is developed in this paper. Performance of the new output-estimation with reduced parameters is compared with the original output-estimation with full parameters and an exponential forgetting factor. Estimated outputs are computed from the estimated input-output model at a high rate, and trace the analytical outputs computed from the deformation model. The performance is demonstrated by simulation with a linear tensor-mass model.