• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.399-402
• /
• 2005

In ultra-high strength SFRCC(Steel Fiber Reinforced Cementious Composites), much silica fume are used to improve strength, flowability and durability. Silica fume have merits of filling the voids, enhancement of reheological chracteristics, production of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigate replacement of silica fume in ultra-high strength SFRCC we used the granulate blast-furnce slag with finess 4000, 6000, 8000. As a results, we have evaluated that the bigger the finess the more increase compressive strength of ultra-high strength SFRCC using the blast-furnce slag and there was no problem from the viewpoint of flowability and compressive strength when we use blast-furnce $50\%$ with replacement ratio of silica fume

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.844-845
• /
• 2006

For microelectronic circuits, the main type of failure is thermal fatigue. Therefore, the search for matched coefficients of thermal expansion (CTE) of packaging materials in combination with a high thermal conductivity is the main task for developments of heat sink materials electronics, and good mechanical properties are also required. The aim of this work is to develop copper matrix composites reinforced with carbon nanofibers to meet these requirements. In this paper, a technology for obtaining a homogeneous mixture of copper and nanofibers will be presented and the microstructure and properties of consolidated samples will be discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.548-557
• /
• 2012

In this study the thermal performance of G-PCM replaced for find aggregate in mortar specimens was evaluated using TG-DTA. As a result, it was found that when solid changed into liquid, it absorbed heat, and when liquid changed into solid, it radiated heat. In addition, the fluidity and the compressive strength of mortar with G-PCM can be applied to the floor mortar and a wall finish material. Also the higher the replacement ratio, the larger the latent heat capacity. It was found that the mortar with G-PCM slowed the increase and decrease of temperature. Thus, the duration of pleasant indoor temperature is extended by the floor and wall mortar with G-PCM. In conclusion, G-PCM is expected to reduce the heating energy consumption.

• Resources Recycling
• /
• v.5 no.2
• /
• pp.52-56
• /
• 1996

Fix crushing characteristics of construction concrete wastes wcrc rnvcstigatcd in order to scparate the natural aggregatcs. A roll crushcr and a hammcr crusher wcrc used to granulate pre-crushed concrete\ulcorner below 30 rnm The crushers pruducc finer sizes far ccmcnt concrete than for asphalt concrele, and the hammer crushing resulls in separating the aggregales from thc olhers better than thc roll crushing. The narural aggregatcs of orcr 70-90% by volume were obtained from the concretes by using a riffled shaking table.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.71-77
• /
• 1998

The root-zone environment is an important factor to the plant growth and it is closely related to the thermal characteristics of the root media. In this study thermal characteristics of root media with ambient environmental conditions were analyzed. The temperatures of nutrient solution as well as inside air of culture bed were measured in Nutrient Film Technique(NFT) and Deep Flow Technique(DFT) systems, and also the temperatures of root media measured in aggregate culture systems , The temperature of nutrient solution of NFT system with as low as 3$\ell$/min of flow rate was 3$^{\circ}C$ higher than that with 5 $\ell$/min of flow rate in the daytime, and the temperature of inside air was 2$^{\circ}C$ higher at night. And the temperature of nutrient solution of DFT system with as low as 0.8 cm of water level was 1-2$^{\circ}C$ higher than that with 1 8 cm in the daytime, and the temperature of inside air was almost same at night. The root-zone temperatures in the perlite and rockwool granulate systems with film mulching were 3$^{\circ}C$ higher than those without film mulching in the daytime. However, the rockwool slab system with film mulching showed the same trend as rockwool granulate system, but relatively higher temperature than any other medium because of the exposure of media surface to the ambient air. Additionally the temperature below the plant was measured 3$^{\circ}C$ lower than that between plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.1
• /
• pp.67-71
• /
• 1998

This study was carried out to granulate artificial zeolite powder that remove ammonium nitrogen and phosphorous simultaneously in wastewater treatment. Optimum water content was required for 30 percent volume to granulate artificial zeolite with 1.7mm diameter and 1~2cm length using granulator. Portland cement could remove much $NH_4{^+}$ and $PO_4{^{3-}}$ from the wastewater than other binding materials. Mixed 33, 25. 20. 16 percent of portland cement to artificial zeolite powder(v/v), cation exchange capacity of the granulars were 66.5, 81.4, 126.8, $151.2cmol^+kg^{-1}$ and hardness of that were 176.1, 24.4, 4.1, $0.4kg\;cm^{-2}$, respectively. Content of portland cement in the granular were related with removal of $PO_4{^{3-}}$ positively and that of $NH_4{^+}$ negatively. Shaked 1g of the granulars that made of portland cement 33 percent with 40ml synthetic wastewater containing $NH_4{^+}$ $1545mgl^{-1}$ and $PO_4{^{3-}}$ $417mgl^{-1}$, 99.4 percent of $NH_4{^+}$ and 90.3 percent of $PO_4{^{3-}}$ were removed simultaneously after 48 hours shaking. The longer shaking, the more $NH_4{^+}$ and $PO_4{^{3-}}$were removed. The artificial zeolite granular had both micropore and macropore that could be useful in the wastewater purification.

• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.14-24
• /
• 2019

Purpose: To assess the influence of using different combinations of guided bone regeneration (GBR) materials on volume changes after wound closure at peri-implant dehiscence defects. Methods: In 5 pig mandibles, standardized bone defects were created and implants were centrally placed. The defects were augmented using different combinations of GBR materials: xenogeneic granulate and collagen membrane (group 1, n=10), xenogeneic granulate and alloplastic membrane (group 2, n=10), alloplastic granulates and alloplastic membrane (group 3, n=10). The horizontal thickness was assessed using cone-beam computed tomography before and after suturing. Measurements were performed at the implant shoulder (HT0) and at 1 mm (HT1) and 2mm (HT2) below. The data were statistically analysed using the Wilcoxon signed-rank test to evaluate within-group differences. Bonferroni correction was applied when calculating statistical significance between the groups. Results: The mean horizontal thickness before suturing was $2.55{\pm}0.53mm$ (group 1), $1.94{\pm}0.56mm$ (group 2), and $2.49{\pm}0.73mm$ (group 3). Post-suturing, the values were $1.47{\pm}0.31mm$ (group 1), $1.77{\pm}0.27mm$ (group 2), and $2.00{\pm}0.48mm$ (group 3). All groups demonstrated a loss of horizontal dimension. Intragroup changes exhibited significant differences in group 1 (P<0.001) and group 3 (P<0.01). Intergroup comparisons revealed statistically significant differences of the relative changes between groups 1 and 2 (P=0.033) and groups 1 and 3 (P=0.015). Conclusions: Volume change after wound closure was minimized by using an alloplastic membrane. The stability of the augmented horizontal thickness was most ensured by using this type of membrane irrespective of the bone substitute material used for membrane support.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.148-153
• /
• 2004

The organoleptic properties of granule tea was optimized for granulation of Polygonatum sibiricum Delar(Dunggulle) tea for exclusion of scorched smell and increase of consumption. The length of 2 mm was suitable to cutting size of Dunggulle for preparation of the roasted Dunggulle. The optimum sensory conditions for aroma of Dunggulle granule tea showing 7.85 organoleptic score were 80.61% in ratio of Dunggulle extracts to total extracts, 12.77% in content of total extracts and 37.33% in rate of glucose to total sugar. The highest score of overall palatability was 5.96 at 61.11% in rate of Dunggulle extracts to total extracts, 13.79% in content of total extracts, and 60.92% in rate of glucose to total sugar.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.149-154
• /
• 2002

This study was conducted to find the structure of phytoplankton community in the Hoeya river(Ulsan) from March 2000 to February 2001. The taxa of phytoplankton identified included 135 species, 5 divisions, 33 families and 82 genera. Among them, chrysophyta(diatoms) were 63 species(46.7%), chlorophyta(green algae) 47 species(34.8%), pyrrophyta(dinoflagellates) 13 species(9.6%), cyanophyta (cyanobacteria) 8 species(5.9%) and euglenophyta(euglenoids) 4 species(3.0%) respectively. Ecological important species is called frequently appearing species, red tide causative species, seawater species and pollution indicator. 22 species including Aulacoseira granulate were recorded frequently appearing species. 19 species including Ceratium furca were recorded as red tide causing species. And the pollution indicators were 33 species including Actinastrum hantzschii var. fluviatile. The highest standing crops were 3,103,441 cells/$\ell$ in August at the RW-1 and the lowest 1,245 cells/ $\ell$ in January at the RW-5. In the community analysis, the dominanance indices ranged from 0.34(October, RW-2) to 0.94(January, RW-1) and the diversity indices from 0.50(May, RW-2) to 2.57(September, RW-2). The saprobic indices were 2.43 in RW-1, 2.41 in RW-2, 2.375 in RW-3, 2.40 in RW-4, 2.43, in RW-5. Therefore, these areas were investigated "$\beta$-mesosaprobic". According to the similarity index among the stations, these areas were defined as residential district areas(RW-2 and RW-3), lower part of the dam (RW-1) and seawater areas(RW-4 and RW-5).

• Korean Journal of Plant Taxonomy
• /
• v.37 no.2
• /
• pp.87-108
• /
• 2007

The pollen morphology of 31 taxa, representing all woody species from 12 genera of Fabaceae in Korea, was examined by light microscope and scanning electron microscope. The pollen grains were monad and prolate spheroidal or rarely subprolate in equatorial view. The pollen grain aperture was trizonocolporate or rarely trizonooperculate, which does not occur in the other families of Fabales in Korea. The exine showed a great variety of sculpture pattern, i.e. psilate, microperforate, densely microperforate, perforate, polygonal perforate, macroperforate, macroperforate with granules in holes, polygonal macroperforate, verrucate with pitted perforate striae, verrucate-perforate, granulate, rugulate, reticulate or refined reticulate. The pollen morphological data supported the idea that the genera Echinosophora and Sophora were congeneric. Caragana (Galegeae) was quite close to the Sophora group (Maackia, Sophora and Echinosophora) of the Sophoreae in each measured pollen parameter and exine sculpture pattern. Eleven genera of Fabaceae were recognized based on differences in aperture type, pollen grain shape and exine pattern, and a generic pollen key of the woody Fabaceae in Korea was developed. A key to pollen types of Lespedeza was also suggested. The examined taxa of Coronilla and Wisteria were recognized by their exine patterns.