• 한국지형학회지
• /
• 제26권1호
• /
• pp.15-26
• /
• 2019

In this study, we investigated the grain size, lithological type, and shape of coarse bed materials in the upper and middle reaches of Gongneungcheon River. For this purpose, 11 sampling points were selected along the river. For 100 samples of the coarse bed materials at each point, three axes (long, intermediate, and short) of samples were measured, and their lithological types were also identified. By measuring grain size, the sphericity and flatness of samples were calculated. Finally, every particle was classified into four shape categories: sphere, disc, blade and rod. We found that the grain size in incised meandering reach is the largest. This is mainly due to the supply of coarse materials from steep valley sides along the meandering channel. According to the lithological analysis, all samples were identified as granite, gneiss and schist, and quartz. The proportion of granite decreased, whereas the proportion of gneiss and schist increased downstream. These patterns indicate that the bedrock distribution within the study area accounts for the downstream lithological variation of coarse bed materials. With regard to the grain shape, sphericity gradually decreased while flatness gradually increased downstream. In the case of the shape classification, unlike the general downstream pattern of grain shape, the proportion of the sphere type decreased and the proportion of the blade type increased downstream. Such a reversal change in the downstream direction turns out to be determined by the lithology (such as foliation, bedding and the pattern of weathering) of coarse bed materials.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.101-101
• /
• 2017

This study was carried out to improve yield potential of Tongil type rice variety based on QTLs analysis associated with yield component using a total of 386 rice recombinant inbred lines (RILs) derived from a cross between Tongil type high yield variety "Hanareum2" and Japonica variety "Unkwang". 384 SNP markers were used, and 241 of them (62.6%) were polymorphic between Hanareum2 and Unkwang. One hundred forty-four QTLs in 11 traits, such as heading days, were detected. Most of them were 21 QTLs associated with 1000 grain weight and the least was 8 QTLs associated with panicle number. The QTL, qDTH3-2 associated with days to heading was identified to delay heading date for 2.4~2.6 day. Eleven QTLs were associated with culm length. The QTL, qCL1-2 on chromosome 1, was identified to decrease culm length. A total of 16 QTLs were detected for panicle length. Three QTLs, qPL3, qPL6, and qPL7-1 were increased panicle length. Seven QTLs related to panicle number except qPN7 were increased the number of panicle. Four QTLs related to grain number per panicle, qGNP2-1, qGNP6, and qGNP7, were increased the number of grains. Three QTLs associated with grain filling rate, qGFR1, qGFR2-2, and qGFR7-1 were increased grain filling rate. Twelve QTLs associated with 1,000 grain weight. were increased the grain weight. Fourteen QTLs were identified associated with grain length. 10 QTLs, such as qGL1-1, were increasing grain. Fifteen QTLs associated with grain width were detected. The 8 QTLs, such as qGW1-1, were elongated grain width. Seventeen QTLs were associated with grain thickness, and ten QTLs of them were increased grain thickness. We need further study to develop introgression lines of each QTL to improve yield potential of Tongil type rice variety.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.106-111
• /
• 1999

To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

• 한국주조공학회지
• /
• 제34권5호
• /
• pp.170-178
• /
• 2014

Using the Gleeble test, the effects of [Mn/S] ratios and the presence of sulfides on the high-temperature fracture morphology of heavy-section steel castings were analysed via the observations of the microstructures. The specimens for which the [Mn/S] ratio was in the range of 60~80 showed a ductile fracture morphology with an area reduction of more than 60%, while some specimens with similar [Mn/S] ratios showed a brittle fracture morphology with an area reduction of 0.0% due to the liquidation of sulfides at the grain boundary. The fracture morphology was classified into three types in the Gleeble high-temperature tensile test specimens. The first type showed dimple formation at the grain boundary, the formation of globular MnS sulfides, and plastic deformation of sulfides at an elevated temperature, indicating a needle-point type of ductile fracture with area reductions of 96.0~97.8%. The second type was a knife-edge type brittle fracture with an area reduction of 0.0% due to the film-type liquidation of sulfides at the grain boundary, band-type liquidation, and the liquidation of a terraced nipple pattern. The third type was the typical ductile fracture with an area reduction of 31.3~81.0%, in accordance with the mixture of dimples with in the grains and terraced nipple pattern at the grain boundary.

• 한국주조공학회지
• /
• 제23권2호
• /
• pp.63-68
• /
• 2003

Al-Ti-C grain refiner form a relatively new alternative to the existing class of Al-Ti-B type grain refiners for achieving fine equiaxed structures in aluminum alloys during casting and solidification. The present study was carried out to investigate the influence of Al-Ti-C master alloys on the grain structure of Al-7Si alloys. The present study also investigates the relationship between grain refining efficiency and concentrations of Fe and Si in hypo-eutectic Al-Si alloys using Al-3Ti-0.13C master alloys. It is found that several parameters affect significantly the grain refining performance in silumin alloys. The present study reports the influence of various parameters such as alloy content, master alloy addition level, melt holding time and superheat on the grain refining efficiency in Al-7Si alloys.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.587-593
• /
• 1995

Abnomal grain growth behavior of BaTiO3 ceramics was investigated with addition of seed grains. It was foudn that the nucleation rate of abnormal grain was constant and growth of abnormal grain was linearly increased with sitnering time, regardless of amount of seed grains. These facts were also confirmed by fitting of the volume fraction of abnormal grain vs. sintering time using Avrami type equation (n=4). It was suggested that seed grains did not change the nucleation rate or growth mechanism of abnormal grain but increase the number of abnormal grains at initial stage of sintering and then it led to fine microstructure of BaTiO3 ceramics.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.166-169
• /
• 1997

For parallel processing, the compiler partitions a loaded program into a set of tasks and makes a schedule for the tasks that will minimize parallel processing time for the loaded program. Building an optimal schedule for a given set of partitioned tasks of a program has known to be NP-complete. In this paper we introduce a GA(Genetic Algorithm)-based scheduling method in which a chromosome consists of two parts of a string which decide the number and order of tasks on each processor. An additional computation is used for feasibility constraint in the chromosome. By granularity theory, a partitioned program is categorized into coarse-grain or fine-grain types. There exist good heuristic algorithms for coarse-grain type partitioning. We suggested another GA adaptive to the coarse-grain type partitioning. The infeasibility of chromosome is overcome by the encoding and operators. The number of processors are decided while the GA find the minimum parallel processing time.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.68-74
• /
• 2006

2024 Al alloys were severely deformed by equal channel angular pressing(ECAP) to obtain an ultrafine grain structure. The more deformation amount increased, the more grain size decreased. Most of the grain structure were changed from elongated to equiaxed shape with increasing pass number. The morphology of S' phases was also changed from rod-type to spherical type. The grain size of 6 passed specimen was 100 to 200 nm, and the size of S' phases was about 10 nm in the microstructure. XRD measurements have revealed that the texture formed by plastic deformation disappeared in the 6 passed specimen. SP test results described that the start of crack propagation occurred at the transition zone between plastic bending and membrane stretching because of small elongation. The maximum strength of ECA pressed specimen increased 1.9 GPa to 2.9 GPa with increasing pass number.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.972-973
• /
• 2007

Relationships between field effect mobility and grain size on pentacene thin-film transistors with $polyimide/SiO_2$ gate dielectrics have been studied. 6 kinds of polyimide were used as surface treatment gate dielectric layer. Grain size of the pentacene thin film were between 5 and $30\;{\mu}m$ and depended on the polyimide. The field effect mobility were also depended on the polyimide and the those values were from 0.027 to $0.69\;cm^2/(Vs)$. The field effect mobility tends to increase with increasing the grain size. Precursor type polyimide containing polyamic acid show better mobility of $0.69\;cm^2/(Vs)$ than soluble type polyimide. Bias stress characteristics in air are discussed in the basis of the grain size.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.109-113
• /
• 2002

A good fluidity of high strength Al-alloys is required to cast thin wall castings needed to reduce the weight of cast parts. The fluidity, measured as the length to which the metal flows in a standard channel, is affected by many factors, such as the pouring temperature, solidification type of the alloy, the channel thickness, melt head, mold materials and temperature, coating etc. Therefore the experimentally measured fluidity scatters very much and makes it difficult to estimate the fluidity of a melt with a few measurements. The effect of Ti content and grain refinement on the fluidity of high strength aluminum alloy was investigated with a test casting with 8 thin flow channels to reduce the scattering of the fluidity results. The fluidity of Al-4.8%Cu-0.6%Mn Al-6.2%Zn-1.6%Mg-1.0%Cu and well-known commercial aluminum alloy, A356 was tested. Initial content of Ti was varied from 0 to 0.2wt% and Al-5Ti-B master alloy was added for grain refinement. The flow length varied linearly with superheat. By adding Ti and Al-5Ti-B, the fluidity increased. The grain size decreased by adding grain refiner at the same time. The fluidity depended on the degree of grain refinement. The fluidity of the alloy solidifying in mushy type is improved by grain refinement, because grain refinement increases the solid fraction at the time of flow stoppage.