• Journal of Powder Materials
• /
• v.5 no.2
• /
• pp.122-128
• /
• 1998

NiAl based ODS (Oxide Dispersion Strengthened) intermetallic alloys have been produced by mechanical alloying (MA) process and consolidated by hot extrusion. Subsequent thermomechanical treatments have been applied to induce secondary recrystallization in an attempt to improve creep resistance in this material. The creep behavior of secondary recrystallized MA NiAl has been investigated and compared with those of as-extruded condition. Minimum creep rate were shown to be approximately two orders of magnitude lower than that in as-extruded condition. The improvement in creep resistance is believed due to the grain coarsening, restricting of dispersoid coarsening as well as increase in grain aspect ratio. Creep threshold stress behavior, below which no measurable creep rate can be detected, has been discussed on the basis of particle-dislocation interaction theory. The threshold stress becomes negligible after secondary recrystallization in MA NiAl, presumably due to dispersoid coarsening and a decrease in grain boundary area during secondary recrystallization.

• Interaction and multiscale mechanics
• /
• v.4 no.3
• /
• pp.207-217
• /
• 2011

International efforts have focused recently on the development of tungsten surfaces that can intercept energetic ionized and neutral atoms, and heat fluxes in the divertor region of magnetic fusion confinement devices. The combination of transient heating and local swelling due to implanted helium and hydrogen atoms has been experimentally shown to lead to severe surface and sub-surface damage. We present here a computational model to determine the relationship between the thermo-mechanical loading conditions, and the onset of damage and failure of tungsten surfaces. The model is based on thermo-elasticity, coupled with a grain boundary damage mode that includes contact cohesive elements for grain boundary sliding and fracture. This mechanics model is also coupled with a transient heat conduction model for temperature distributions following rapid thermal pulses. Results of the computational model are compared to experiments on tungsten bombarded with energetic helium and deuterium particle fluxes.

• 한국기계연구소 소보
• /
• s.16
• /
• pp.29-39
• /
• 1986

Several heat treatment were applied to on HSLA steel of type StE47 (German standard) to produce five ferrite microstructures of different strength and at least two different grain sizes respectively. Whereas the ferrite microstructure had a strong influence on yield strength the effect of grain size was negligible. The different strength levels could be explained by regarding the arrangement of dislocations and vanadium carbide particles, and their mutual interaction. Specimens tranformed at $600^{\circ}C$ showed the highest strength levels. In this case precipitation has occured after the $\gamma$- $\alpha$ transformation. Very small VC particles are arranged mostly along dislocation lines. Increasing both, grain size and pearlite volume fraction leads to a remarkable shift of transition temperature which was further enhanced by increasing ferrite strength.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.2
• /
• pp.136-140
• /
• 2004

Twenty-one lowland rice genotypes were evaluated for their stability parameters with respect to grain yield in a multi locational trial at five different sites of Eastern India viz. CRRI, Cuttack (Orissa); OUAT, Bhubaneswar (Orissa); CRS, Masodha (UP); RAU, Pusa (Bihar) and RARS, North Lakhimpur (Assam). Pooled analysis of variance reflects existence of genotype x environment interactions and contribution of both linear and nonlinear components to genotype (G) x environment (E) interactions. Through stability parameter analysis it was found that Rayda $\textrm{B}_3$, CR 778-95 and CR 661-236 were suitable for over all environments where as Sabita, OR 1334-16 and OR 1358-RGA-4 were suitable for rich environments. PSR 1209-2-3-2, CR 780-1937, Ambika, OR 877-ST-4-2 and CR 662-2211 were identified for poor environments.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.165-173
• /
• 2020

The emergence of unmanned agricultural machinery has brought new research content to the development of precision agriculture. In order to speed up the research on key technologies of unmanned agricultural machinery, classification of intelligence level of unmanned agricultural machinery has become a primary task. In this study, the researchers take the complex interactive system consisting of unmanned grain harvester, task and driving environment as the research object, and carry out a research on the grading and classification of intelligent level of unmanned grain harvester. The researchers of this study also establish an evaluation model of unmanned grain harvester vehicle, which consists of human intervention degree, environmental complexity, and task complexity. Besides, the grading and classification of intelligence level of the unmanned grain harvester is carried out according to the human intervention degree, environmental complexity and the task complexity of the unmanned grain harvester. It provides a direction for the future development of unmanned agricultural machinery.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.349-354
• /
• 2015

The AMMI (additive main effects and multiplicative interaction) and GGE (genotype main effect and genotype by environment interaction) biplot which were accounted for a substantial part of total sum of square in the analysis of variance suggested to be more appropriate models for explaining G $\times$ E interaction. The grain yield of total ten sesame genotypes was significantly affected by environment which explained 61% of total variation, whereas genotype and genotype x environment interaction (G $\times$ E) were explained 16%, 24% respectively. From the results of experiment, three genotypes Miryang49, Koppoom and Ansan were unstable, whereas other three genotypes Kyeongbuk18, Miryang50 and Kanghuk which were shorter projections to AEA ordinate were relatively stable over the environments. Yangbak which was closeness to the mean yield and short projection of the genotype marker lines was regarded as genotype indicating good performance with stability. Ansan, Miryang48 and Yangbaek showed the best performance in the environments of Naju, Suwon, Iksan and Andong. Similarly, genotype Miyrang47 exhibited the best performance in the environments of Chuncheon and Miryang. Andong is the closest to the ideal environment, and therefore, is the most desirable among eight environments.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.10a
• /
• pp.100-101
• /
• 1996

• Ocean Science Journal
• /
• v.42 no.2
• /
• pp.69-79
• /
• 2007

A vertical transect with 4 km length was established for the macrofaunal survey on the Chokchon macrotidal flat in Kyeonggi Bay, Incheon, Korea, 1994. Tidal elevation (m) and sediment mean grain size $(\phi)$ were inversely predicted by the transfer functions from the faunal assemblages. Three methods: weighted average using optimum value (WA), tolerance weighted version of the weighted average (WAT) and maximum likelihood calibration (MLC) were employed. Estimates of tidal elevation and mean grain size obtained by using the three different methods showed positively corresponding trends with the observations. The estimates of MLC were found to have the minimum value of sum of squares due to errors (SSE). When applied to the previous data $(1990\sim1992)$, each of three inference models exhibited high predictive power. This result implied there are visible relationships between species composition and faunas' critical environmental factors. Although a potential significance of the two major abiotic factors was re-affirmed, a weak tendency of biological interaction was detected from faunal distribution patterns across the flat. In comparison to the spatial and temporal patterns of the estimates, it was suggested that sediment characteristics were the primary factors regulating the distribution of macrofaunal assemblages, rather than tidal elevation, and the species composition may be sensitively determined by minute changes in substratum properties on a tidal flat.

• Journal of Magnetics
• /
• v.3 no.1
• /
• pp.4-8
• /
• 1998

Two different compositions of melt spun magnetic alloys, $ Nd_4Fe_{80}B_{16} and Nd_4Fe_{76}Co}\_3Hf_{0.5}Ga_{0.5}B_{16},$ were characterized in terms of magnetic properties and thermal behaviors. It was found that the addition of Hf and Ga effectively slow down the crystallization rate of the nanocomposite $ Nd_2Fe_{14}B/Fe_3B$ magnet. Coercivity(iHc) changes only slightly with varying the post annealing conditions confirming that iHc is not a sensitive magnetic quantity as a function of grain size and exchange coupled interaction. The experimentally observed behaviors of Mr and Hc do not vary monotonously with in-creasing grain size which is not in agreement with the numerically calculated result near the critical grain size (dc). The plot of the grain size dependence for the remanence and coercivity in isotrop!c nanocomposite magnets has been revised in this study. The maxium energy product, $(B, H)_{max}$ =15.34 MGOe, and a reduced remanence, Mr/Ms=0.84 were obtained, respectively.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1408-1417
• /
• 2024

Objective: This study investigated the effects of dietary supplementation with lysolecithins (LPC) on growth performance, nutrient digestibility, blood profiles, immunity, and liver health in broiler chickens. Methods: A cohort of 240 one-day-old male Arbor Acres broilers of comparable weight was divided into four treatment groups, each comprising six replicates of 10 birds. The groups were defined as follows: positive control with recommended metabolizable energy (PC+ME), negative control with 90 kcal/kg reduced ME (NC+ME), PC supplemented with 300 mg/kg LPC (PC+LPC), and NC supplemented with 300 mg/kg LPC (NC+LPC). Results: LPC supplementation led to a statistically significant reduction in the feed conversion ratio (p = 0.05) and a decrease in the proportion of abdominal fat and the liver (p<0.05). Digestibility of dry matter was also enhanced (p<0.05). Malondialdehyde concentrations in the liver were significantly reduced by LPC (p<0.01), with a noteworthy interaction between energy levels and LPC affecting this reduction (p<0.05). Serum levels of interleukin-6 were reduced on day 21, and both endotoxin and interleukin-6 levels were lower on day 42. Notably, a significant interaction was observed between the energy levels and LPC on relative liver weight and endotoxin concentrations in the serum (p<0.05). Conclusion: The study concluded that LPC positively affects growth performance, nutrient digestibility, immune response, and antioxidative capacity in broiler chickens, affirming its value as a beneficial feed additive in poultry nutrition.