• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.859-866
• /
• 1993

With the object of doing mechanical grafting of cucurbitaceous vegetables, the grafting robot was developed in 1989. This robot consists of the following components : feeding wheels, grippers, conveying wheels, cutters , fixing clipper, discharger , controller and power supply. One cycle time to produce a grafted plant is about 3 seconds, Results of some cucumber grafting tests : successful grafting rate of 98 percent and after acclimation, a successful agglutination rate of 95 percent. These techniques are now transferring to the private company. The commercial robot will come into the market in this year.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.243-247
• /
• 2020

This study investigates bench grafting (BG) and field grafting (FG) in walnut by comparing the graft take rate, grade ratio, and simple earning rate using a conventional method. The mean grafting-take rate of the BG was 30.3% while that of FG was 77.1%. The quality of grafted seedlings is classified as good, fair, and poor. The quality grade ratio of FG seedlings is 3:4:3 (good:fair:poor) while the grade ratio of BG seedlings is 2:3:5. Field grafting resulted in 20% more good and fair seedlings than the BG method. As a result of calculating the earning rate with the sales income versus the input cost, FG has 1.5 times higher earning rate than BG. In summary, FG could be an alternative to conventional epicotyl grafting because it produced high-quality seedlings and increased productivity due to its high graft-take rate and earning rate.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.946-953
• /
• 1996

The effect of absorbed dose, dose rate, cationic salts and solvent on the grafting yield was evaluated when acrylic acid was grafted onto polypropylene fabric by simultaneous irradiation process. Low dose rate when irradiated with the same absorbed dose led to a high grafting yield. On the other hand, the grafting yield increased with dose rate in case the total irradiation times is equal, and the initial rate of grafting was found to be proportional to be 0.74 power of dose rate. $FeSO_4{\cdot}7H_2O$ was found to be the most effective additive for high grafting yield, while inhibiting homopolymer formation. It was impossible to induce radiation grafting without the addition of the certain amount of salt, but the grafting yield decreased with increasing metallic salt.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.62-66
• /
• 1997

The MAA graftings in silk fiber were done by redox system for the purpose of investingating the effect of ferrous sulfate additive on the grafting rate and graft ratio in various conditions. The graft ratio was higher in redox graft system than in peroxide graft system and the graft ratio in redox graft system was also higher depending on decrease of ferrous sulfate additive. The saturation graft ratio obtained by empirical equation, log X=K/t, was increasing depending on the increase of ferrous sulfate additive. Initial grafting rate was increased but the latter grafting rate was decreased in redox graft system. The effects of liquor ratio(L.R.) on the graft ratio in redox graft system, were higher in high L.R. than in low L.R..

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.1
• /
• pp.48-53
• /
• 2000

This study was carried out to investigate the growth characteristics and propagation methods of Prunus species as woody landscape plants. Both the flowering time and the survival rate of grafting were investigated. The results are obtained as follows: The total of flowering period of Prunus species in Kyonggi province area lasted for about 26 days. The flowering time of the species overlaps. These observations suggest that the possibility of interspecific pollination among Prunus species is very high in the kyonggi province area. The total number of flowers in the species in area was in as follows decreasing order : (1) Prunus yedoensis >Prunus pendula var. ascendens > Prunus subhitella > Prunus sesrulata for. fugenzo > Prunus leveillenana var. pendula. The number of carpels in each flower ranged from 0.3 for Prunus subhirtella to 1.8 for Prunus serulata for. fugenzo. In the caseof Prunus sesrulata for. fugenzo, the carpels appeared to be degenerated and thus losted their function. However, there exist two tyoes of Prunus subhirtella. While one type had normal carpel, the other had the degenerated one. The survival rate of grafting was investigated on May 19. Eighty there percent of the plants survived when the grafting was made in the greenhouse in January whereas the plants grafted in nursery in March survived less in that Prunus suhirtella showed 64%, Prunus leveilleana var. pendula 47%, Prunus sesrulata for. fugenzo 43%, Prunus yedoensis 62% and Prunus pendula var. ascendens 24%, respectively. Therefore, it suggested that high humidity and optimal temperature appeared to incase the survival rate of the grated plants. We therefore propose here that grafting should be done in the greenhouse that both humidity and temperature could be controlled to enhance the efficiency of grafting. This will enable as to perform grafting in winter as well.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.938-945
• /
• 1996

The present studies are to describe the grafting reaction of styrene in various solvents to polypropylene fabric by the simultaneous method using Co-60. The influence of various factors such as absorbed dose, dose rate, type of solvent, acid and multifunctional monomer were evaluated. At constant absorbed dose, the grafting yield was found to be higher at low dose rate. The initial rate of grafting was found to be proportional to a 0.56 power of dose rate. The inclusion of mineral acid in the grafting solution led to an increase in radiation grafting yield at almost all monomer concentration examined. Multifunctional monomer was also effective to increase grafting yield. The addition of both acid and multifunctional monomer was found to accelerate the grafting yield much more than the separate addition of two additives.

• Korean Journal of Microbiology
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1965

Over a period of 1962-64, a transmission-experiment of witchess' broom of jujube tree by stem-grafting was conducted. When stem-grafting of sound scions upon diseased roots or diseased scions upon sound roots were carried out, disease transmission of high rate was witnessed; 99% in the former and, in the latter, 62% of the stocks which saw union by callussing and had new shoots. Even when the diseased scions by stem-grafting or the diseased buds by budding upon sound stock died away, the transmission rate was 21% in stem-grafting and 14% in budding which seems to show that, when tissues of diseased plants and stocks are kept contacted over a certain period, the disease transmission occurs. And when the recovered scions taken from once diseased tree were grafted upon diseased roots, the transmission rate was 100 % and therefore it is presumed that the immunity could not be acquired even under the assumption of complete recovery from the disease. In stem-grafting of the diseased scions upon sound roots, 98% of the scions which were stored in the cellar, overwintered and grafted in spring was diseased, whereas the disease rate of the scions which were cut and grafted in spring was only 33%. It was particularly noteworthy that 90% of the scions in the former case and only 3% in the latter case were diseased as of June 18th approximately 2 months after the actual grafting and then the latter advanced to 33% with the passage of time. It appears that the pathogen in branches and shoots of the diseased trees standing outdoors become inactivated or diminished during winter. Through its symptom, pathological change in tissue, and easy transmission of the disease via stem-grafting, it seems certain that the pathogen of the witches broom disease in jujube tree is a virus.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.6
• /
• pp.529-536
• /
• 2010

Purpose: The Purpose of this study is to show the total survival rate of implants with maxillary sinus grafting and the effects that reach the survival rate by classifying types of graft materials, implant type, operation method, residual bone height and evaluate graft material resorption rate after sinus grafting Patients and Methods: 61 dental implants placed with sinus bone grafting in 24 patients at Wonkwang University Sanbon Dental Hospital were installed simultaneously or after regular healing. Various bone grafts (autograft, xenograft, allograft, alloplast) and fourth implant type (GSII, Xive, Implantium, Novel biocare) were used. All implants were investigated clinically and radiographically, being with average 20 months follow-up period after installation. Results: 3 fixtures were lost, resulting in 95.1% cumulative survival rate of 61 osseointegrated dental implant. Survival rate according to bone material type, Implant type, operation method, residual bone height, have no statistically significant differencies. The mean preoperative residual alveolar bone height was 4.75 mm, average postoperative height of graft materials 10.8 mm, vertical bone resorption rate was 10% after 2 years. Resorption rate according to operation method was 7% (simultaneous) and 5% (delayed) after 1 year. Conclusion: It can be suggested that maxillary sinus grafting may have predictable result with various bone graft materials and implant type, residual bone height, operation method

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.788-793
• /
• 2014

Vegetative propagation of walnut is difficult compared with that of other fruit and nut species. The present study assessed three methods of grafting (patch, shield, and chip) at various periods of walnut growth and with different timings of grafting in walnut. Early May was the best time for grafting, at which time the highest success rate was obtained by the patch method (96%), followed by chip-budding (75%), while shield-grafting showed the lowest efficiency (10%). Patch-grafting was also successful (75-80%) in early August and moderately successful in mid-June (51-55%), while the shield and chip methods had no success during these two times (0.00%). Patch-grafting was more efficient and also induced better callus formation and scion growth than the other two methods. The genotypes used did not affect grafting efficiency. The best results were obtained by patch-budding in both tested genotypes. The present findings show the potential value of patch-grafting in early May as a propagation method for walnut for establishment of guidelines for propagation.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.24-33
• /
• 2016

The grafting reaction for maleic anhydride (MA) onto high density polyethylene (HDPE) was investigated from solution process with initiators. The chemical modification of neat HDPE was carried out with various contents of MA (3-21 wt.%) and initiator (0.2-1 wt.%) at different temperature ($80-130^{\circ}C$). The grafting degree was obtained from the titration and the highest grafting degree was 3.1%. The grafting degree increased as the content of MA and initiator increased, however, the highest grafting degree was demonstrated for a particular content of MA and initiator. In the non-isothermal crystallization kinetics, the Ozawa model was unsuitable method to investigate the crystallization behavior of MA onto HDPE, whereas the Avrami and Liu models found effective. The crystallization rate was accelerated as the cooling rate increased, but postponed by combination of MA onto neat HDPE backbone.