• 한국의류학회지
• /
• 제17권3호
• /
• pp.347-358
• /
• 1993

Graft copolymerization of MMN4-VP onto cotton fiber using Ce(IV) salt as an initiator and triton X-100 as an emulsifier was performed under various polymerization conditions. In cograft polymerization, the polymeization behavior according to variation of 4-VP feed composition and the characteristics of MMA/4-VP graft polymer such as affinity for acid dye owing to cationization of cotton, antibacterial activity and thermal behavior were investigated. The results of this study were as follows : 1. While in copolymerization of MMA and 4-VP, 4-VP content in copolymer was more than that of monomer feed composition. 2. Increasing 4-VP content, graft yield was decreased, but graft efficiency was increased. In case of MMA/4-VP graft polymerization, the highest graft yield was obtained at higher CAN concentration than in MMA graft polymerization, the reason is that the behavior of 4-VP was disturbed by Ce(IV) sail 3. Elevation of temperature resulted in increase of graft yield and the apparent activation energy of MMA/4-VP graft polymerization was higher than that of MMA graft polymerization. 4. MMA/4-VP grafted cotton fiber showed affinity for acid dye, antibacterial activity and higher moisture regain than MMA grafted cotton fiber. MMA/4-VP grafted cotton fabric showed improvement of wrinkle recovery up to 40~50% graft yield and decreased thereafter. MMA/4-VP and MMA grafted cotton fabric did not showed significant difference in wrinkle recovery and stiffness.

• 한국잠사곤충학회지
• /
• 제27권1호
• /
• pp.47-50
• /
• 1985

견의 증량 및 실용성 향상을 위한 견에 대한 비닐 단량체 그라프트 중합법에 관한 연구에서 각종 단량체에 의한 그라프트 중합견의 물성 변화에 대한 시험 결과를 요약하면 다음과 같다. 1. 생사에 대한 스타이렌 및 M.M.A.의 그라프트 중합에 있어서 그라프트 중합율이 높을수록 생사의 sericin 정착율이 높았으며 단량체별로는 스타이렌 중합구가 M.M.A. 중합구보다 sericin 정착율이 높았다. 비닐 단량체 그라프트 중합 생사는 무처리 생사에 비하여 강력 (g/d) 및 신도가 저하되었다. 2. G.M.A. 그라프트 중합견의 그라프트율은 53.7%로서 M.A.A. 중합견의 48.6%에 비하여 약간 높았으며 중합견포의 급수율은 그라프트 중합율이 높을수록 떨어졌으나 G.M.A. 중합견은 39.6%로서 M.M.A. 중합견의 25.0%에 비하여 14.6%가 높았다. 3. E.G.M. 그라프트 중합견의 그라프트율은 58.3%로서 G.M.A. 중합견의 53.9%에 비하여 약간 높았으며 E.A. 중합견은 33.7%로서 가장 낮은 수준이었다. E.G.M. 중합견의 급수율은 G.M.A. 및 E.A. 중합견에 비하여 우수하였으며 견포의 강연도는 E.G.M. 및 G.M.A. 중합견 모두 미중합견에 비하여 증가되므로서 촉감이 저하되었다. 4. 그라프트 중합사의 중합균일도에 있어서 그라프트 중합욕을 진양 처리하면 관행 중합법에 비하여 중합 가공 견사의 섬도편차와 견포의 두께 편차를 감소시키므로서 중합규일도를 향상시킬 수 있었다.

• 한국잠사곤충학회지
• /
• 제19권1호
• /
• pp.33-36
• /
• 1977

Graft polymerization of vinyl monomers onto silk were carried out in aqueous medium using ceric salt as an initiator, and discussed about the mechanical properties of silk. The results obtained are summarized as follows: 1. Percent grafting is greatly enhanced by the increasing of the temperature. 2. Effect of percent grafting is in the order of methyl methacrylate, and vinyl acetate. 3. Strength is decreased in the high grafted silk, and elongation is increased in the low grafted silk.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.1-9
• /
• 1992

Graft polymerization mechanism and rate of polymerization of MMA and MMA/4-VP onto cellulose fiber using Ce(IV) salt as an initiatior were investigated. It was shown that the concentration of Ce(IV) salt affected on the graft yield, graft efficiency, total conversion and the rate of graft polymerization. The graft yield and total cenversion for MMA grafted polymer were significantly higher than those for MMA/4-VP grafted polymer with variation of CAN concentration. In this system the oxidative termination by Ce(IV) salt was considered particularly in higher concentration Ce(IV) ion. The change in the mode of termination reactions with variation of CAN concentration made possible the presence of an optimum Ce(IV) ion concentration for maximum graft yield.

• 방사선산업학회지
• /
• 제6권4호
• /
• pp.317-322
• /
• 2012

In this study, the preparation of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted surface was performed using an eco-friendly and biocompatible ion beam-induced surface graft polymerization. The surface of a perfluoroalkoxy (PFA) film was activated by ion implantation and N-isopropylacrylamide (NIPAAm) was then graft polymerized selectively onto the activated regions of the PFA surfaces. Based on the results of the peroxide concentration and grafting degree measurements, the amount of the peroxide groups formed on the implanted surface was dependant on the fluence, which affected the grafting degree. The results of the FT-IR-ATR, XPS, and SEM confirmed that the NIPAAm was successfully grafted onto the implanted PFA. Moreover, the contact angle measurement at different temperatures revealed that the surface of the PNIPAAm-grafted PFA film was temperature-responsive.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.271-280
• /
• 1991

Emulsion graft copolymerization of MMA onto cotton fiber using Ce(IV) salt as an initiator was carried out. Graft yield and graft efficiency were observed according to the kinds and concentrations of emulsifier and polymerization conditions. The physical properties of MMA grafted cotton fabric were investigated. The results of this study were as follows: 1. The heighest graft yield of emulsion graft polymerization occurred at the concentration below cmc of emulsifier, which was different from emulsion polymerization. Nonionic sur- factant as an emulsifier was more effective than anionic one. 2. The highest graft yield was obtained at the initiator concentration $1{\times}10^{-2}mol/l$. The viscometric molecular weight of PMMA was in the order of 106. 3. As reaction time increased, the graft yield increased but the graft efficiency decreased. 4. Elevation of reaction temperature resulted in increase of graft yield. The apparent activation energy of MMA graft polymerization was 4.72 Kcal/mol. 5. Physical properties of MMA grafted cotton fabric varied with increase of grafting. Thickness and stiffness showed a noticeable increase, whereas tensile strength and elongation was slightly increased. Crease recovery increased as the graft yield increase up to $50\%$ and decreased thereafter.

• 폴리머
• /
• 제34권2호
• /
• pp.150-153
• /
• 2010

본 연구에서는 방사선에 의한 그래프트 중합을 이용하여 생체분자가 고정화된 다중벽탄소나노튜브 (MWCNT)를 제조하였다. 생체분자의 고정화를 위하여 MWCNT에 아크릴 산을 그래프트 중합하였다. 열중량분석과 라만 분석을 통하여 MWCNT에 폴리(아크릴 산)이 효과적으로 그래프트 중합되었음을 확인하였다. 폴리(아크릴 산)이 그래프트 된 MWCNT에 DNA와 단백질과 같은 생체분자들을 고정화하였다. X-선 광전자 분광법과 형광분석을 통하여 생체분자들이 성공적으로 MWCNT에 도입되었음이 확인되었다.

• 공업화학
• /
• 제25권4호
• /
• pp.396-400
• /
• 2014

메조포러스 물질, SBA-15와 MCM-41의 세공 표면을 유기실란인 3-aminopropyltrimethoxysilane (1NS)와 N-[(3-trimethoxysilyl) propyl]ethylenediamine (2NS)를 이용하여 그라프팅법으로 표면 기능화하였다. 표면 기능화된 메조포러스 물질에 $(n-BuCp)_2ZrCl_2$와 조촉매 methylaluminoxane (MAO)를 담지하여 에틸렌 중합을 실시하였다. SBA-15/2NS/$(n-BuCp)_2ZrCl_2$ 촉매는 그라프팅되는 2NS의 양이 증가할수록 담지된 Zr와 Al 함량은 감소하였으며, MCM-41/2NS/(n-BuCp)2ZrCl2 촉매는 2NS의 양이 증가할수록 Zr 함량은 증가하지만 Al 함량은 감소하였다. SBA-15/2NS/$(n-BuCp)_2ZrCl_2$ 촉매의 중합 활성은 2NS의 투입량을 증가할수록 감소하였다. 이는 많은 양의 2NS가 표면에 그라프팅되는 경우 기공부피와 기공크기가 작아지게 되고 따라서 MAO와 메탈로센 촉매 담지량이 감소하게 되기 때문이다. 그러나 SBA-15보다 작은 기공을 갖는 MCM-41을 2NS로 표면 기능화되면 큰 분자 크기를 갖는 조촉매 MAO는 담지 되기 어려워 낮은 MAO 담지량을 갖게 된다. 따라서 메탈로센 담지량은 약간 증가하게 되고 이에 따라 중합 활성이 증가하였다.

• 공업화학
• /
• 제8권5호
• /
• pp.866-871
• /
• 1997

전분의 친수성 및 반응성을 조절하기 위하여 propylene oxide, 1,2-epoxybutane, glycidyl methacrylate, maleic anhydride, caprolactone 등을 반응시켰으며 건조되지 않은 전분을 사용할 경우 propylene oxide, maleic anhydride 외에는 반응 수율이 아주 낮아지는 것이 관찰되었다. 이렇게 개질된 전분을 스티렌과 반응시켜 그라프트 공중합물로 전환하였으며 여러가지 중합방법에 대한 그라프트 수율이 비교되었다. 그라프트 중합반응의 경우 용액중합 및 cerium(IV)이온에 의한 중합은 각각 낮은 효율과 수율을 보였다. 현탁중합 방법으로는 전분 입자의 친수성 때문에 폴리스티렌으로 전분을 encapsulation 하기가 어려웠으며, 유화중합이 스티렌을 그라프트 시키기에 제일 적당한 방법임을 알 수 있었다.

• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.