• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2000년도 추계학술발표회 논문집
• /
• pp.5-17
• /
• 2000

• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.26-32
• /
• 1993

This study is concerned with the graft polymerization of acrylamide onto the surfaces of polyethylene and polyethylene terephthalate films treated with on corona discharge. In the case, peroxides formed by the corona discharge treatment are likely to be the species responsible for initiating the graft polymerization. This treatment produced a continuous charge in wettability and also amid group density on the polymer surface, as evidenced by water contact angle measurement, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis. Both of the merely corona-treated film and the subsequently grafted film are discussed as a function of time after treatment and water washings.

• Elastomers and Composites
• /
• 제25권4호
• /
• pp.273-279
• /
• 1990

The graft polymerization of 2-hydroxyethylmethacrylate(HEMA) and vinyltriethoxysilane(VTES) onto styrene-butadiene-styrene block copolymer(SBS) was carried out in toluene, with radical initiator such as benzoyl peroxide(BPO) and 2, 2'-azo-bis-isobutyronitrile(AIBIN) under nitrogen atmosphere. The degree of grafting was increased with the increases of the reaction temperature and time. And the effeciency of BPO was superior to that of AIBN. The mechanical properties and molecular weight of graft products were measured and the applicability as adhesive of plasticized PVC leather was examined.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.64-69
• /
• 2007

Purpose: The key of treatment in syndactyly is to separate the fused digits safely, and to create a normal web space with enough cutaneous coverage. Despite many techniques have described the correction of syndactyly, skin graft still remains the annoying one. We designed the pentagonal flap from hand dorsum to reconstruct the web space reliably and try to minimize the need for skin graft. Methods: Between July 2003 and August 2005, six cases of syndactyly were corrected at UCLA Medical Center and Hallym University Sacred Heart Hospital using dorsal pentagonal flap for web space reconstruction and straight incisions for the sides of digits to minimize the need for skin graft. The proximal edge of the pentagonal flap was designed in V shape to allow for easy closure of the donor site after advancement. The pentagonal flap was advanced volarly with the underlying dermofat tissues to form a digital web. In some cases, skin defects were unavoidable and covered with full thickness skin graft from the inguinal area. Results: Syndactyly were seen in 4 cases of Apert syndrome, 1 postburn scar webbing with PIP joint contracture and 1 recurrence after the incomplete reconstruction. In all Apert syndrome, straight line incision was used along the sides of the fingers and skin graft was needed. But, in 2 cases of incomplete type, we could save the need for skin graft only for the correction of syndactyly. We could get a good looking web space without any complications such as flap or graft loss. Conclusion: As a modification of Sherif's V-Y dorsal metacarpal flap, we believe pentagonal flap could be one of the easiest and safest way to reconstruct the web space of syndactyly in functional and cosmetic standpoint.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.35-36
• /
• 2003

The purpose of this work is to investigate the surface modification of LDPE film via corona discharge treatment and subsequent graft polymerization, and their effect on the resulting dyeability is studied in terms of the surface functional groups, surface energetics, and acid-base interaction between the modified LDPE and the dyes used.

• 방사선산업학회지
• /
• 제6권3호
• /
• pp.251-255
• /
• 2012

Pulp is typically used for paper industry to manufacturing various types of papers. However simply chemical modification makes enable the pulp to a wide range of application in various industrial fields. To bring the polymerization the gamma ray irradiated on the mixture of kenaf and PEGMA in various dose ranges from 20 to 60 kGy. As a results, the graft degree of 20.0% was obtained from 475 g of gamma ray irradiated pulp and PEGMA. After the polymerization, the chemical structure and morphology of the surfaces were examined by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscope. Chemical structure of grafted pulp has significantly growth in carbonyl content with increasing the radiation dose. Also surface morphology was distinctly changed with decreased the degree of roughness and increasing the diameter. These results were explained gamma ray irradiation improve performance of graft polymerization efficiency.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.50-56
• /
• 1999

The adhesive properties of polyester cord in rubber matrix were investigated according to the surface modification. The polyester cord was oxidized in sodium hypochlorite solution, and graft-polymerized with acrylic acid under the irradiation with ultraviolet light, and then coated with resorcinol-formaldehyde latex (RFL). The modified surface was checked with scanning electron microscope. The adhesive properties were measured by the full-Out method, and evaluated with regard to the energy of adhesion and the maximum load. The polyester was not oxidized in sodium hypochlorite solution, so the surface was not able to etch to produce the coarse topology. As the concentration of acrylic acid and the reaction time were increased, the graft yields were also increased. It was considered that the acrylic acid would swell the polyester and diffuse easily to the inner side of substrate. The adhesive properties of polyeser to rubber matrix were affected by the surface condition. Namely, the maximum load was almost same, but the energy of adhesion was rather higher In the polyester grafted with acrylic acid than in control one. We concluded that the flexible aliphatic chains of polyacrylic acid situated in the interface of cord and rubber matrix were distributed well the stress and strain all over the filler resulting the high energy of adhesion.

• Journal of Periodontal and Implant Science
• /
• 제48권6호
• /
• pp.395-404
• /
• 2018

Purpose: The purpose of this study was to propose a technique for periodontal biotype modification through thickening of the entire facial aspect using a volume-stable collagen matrix and autogenous subepithelial connective tissue graft (CTG) for the treatment of gingival recession. Methods: Four systemically healthy patients showing Miller class I or class II gingival recession in the mandibular incisor area were included in this study. Full-mouth scaling and root planing procedures were performed at least 4 weeks prior to periodontal plastic surgery. A split-thickness flap with a horizontal intrasulcular incision and 2 vertical incisions was used in cases 1-3, and the modified tunnel technique was used in case 4 for coronal advancement of the mucogingival complex. After the exposed root surfaces were debrided thoroughly, double-layered volume-stable collagen matrix was placed on the apical part of the recession and a subepithelial CTG harvested from the palatal area was placed on the coronal part. The amount of root coverage at 3 months postoperatively was evaluated in cases 1-3, and facio-lingual volumetric changes were analyzed in cases 1 and 2. Results: Healing was uneventful in all 4 cases and complete root coverage was shown in cases 1-3. In case 4, reduction of gingival recession was observed at 3 months after surgery. In cases 1 and 2, a comparison of stereolithographic files from the preoperative and postoperative time points demonstrated that the entire facio-lingual volume had increased. Conclusions: The surgical technique suggested herein, using a volume-stable collagen matrix and autogenous subepithelial CTG, may be an effective method for periodontal biotype modification through thickening of the entire facial aspect for the treatment of gingival recession.

• Archives of Plastic Surgery
• /
• 제36권5호
• /
• pp.674-677
• /
• 2009

Purpose: Typical cross finger flap is still a good method for reconstruction of fingertip injuries. However, it is necessarily followed by great loss and aesthetically unpreferable result of donor finger. Hereby, we introduce a modification of cross finger flap with reduction pulp plasty and full thickness skin graft, with which we could reduce the defect size of injured fingertip and donor site morbidity at the same time, without any need for harvesting additional skin from other part of hand. Method: This method was performed in the patients with fingertip injuries of complete amputation or in case of loss of fingertip due to necrosis after replantation. Firstly, reduction pulp plasty was performed on the injured finger to reduce the size of defect of fingertip. Additional skin flap was obtained from the pulp plasty. Secondly, cross finger flap was elevated from the adjacent finger to cover the defect on the injured finger. At the same time, defect on the donor finger produced by the flap elevation was covered by full thickness skin graft with the skin obtained from the pulp plasty of injured finger. Results: Flap and graft survived without any necrosis after surgical delay and flap detachment. All of them were healed well and did not present any severe adversary symptoms. Conclusion: Cross finger flap with reduction pulp plasty and full thickness skin graft is an effective method that we can easily apply in reconstruction of fingertip injury. We think that it is more helpful than the usual manner, especially in cases of children with less soft tissue on their fingers for preservation and reduction of the morbidity of donor finger.

• 폴리머
• /
• 제34권6호
• /
• pp.553-559
• /
• 2010

The paper describes the preparation and characterization of conductive polyaniline-modified polymers by growing of aniline onto functionalized poly(styrene-co-p-methylstyrene) [P(St-co-MSt)]. For this purpose, P(St-co-MSt) was synthesized via nitroxide mediated radical polymerization (NMRP) and then N-boromosuccinimide was used for introduction of bromine to the benzylic positions of copolymer. Afterwards, 1,4-phenylenediamine was linked to the brominated P(St-co-MSt) and functionalized copolymer $[P(St-co-MSt)-NH_2]$ was prepared. The graft copolymerization of aniline monomers onto functionalized P(St-co-MSt) was initiated by oxidized phenylamine groups after addition of ammonium peroxydisulfate (APS), and p-toluenesulfonic acid-doped PANI was chemically grafted onto P(St-co-MSt) via oxidation polymerization. The obtained terpolymer was studied by FTIR and UV-Vis spectroscopy and its thermal behaviour were examined by DSC and TGA analyses. The conductivity of terpolymer was measured by four-point probe method and electroactivity was measured by cyclic voltammetry (CV). The solubility of P(St-co-MSt)-g-PANI was examined in common organic solvents.