• 제목/요약/키워드: grading of the battery

검색결과 6건 처리시간 0.02초

폐배터리를 활용한 배터리팩을 위한 Fuzzy Logic 기반 Cell Grading 기법 연구 (Cell Grading Technique Based on Fuzzy Logic for Battery Pack Using Wasted Li-ion Battery)

  • 한동호;권상욱;임철우;장민호;김종훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2019년도 전력전자학술대회
    • /
    • pp.439-440
    • /
    • 2019
  • 리튬 이온 배터리가 전기 자동차 및 다양한 어플리케이션에 적용됨에 따라 폐배터리의 수요 또한 증가하고 있다. 내부 화학적 상태가 상이한 배터리의 전기적 특성실험을 통해 파라미터를 선정하였으며, 데이터의 분포에 적합한 Fuzzy Logic을 설계하였다. 설계된 Fuzzy Logic을 통한 Cell Grading으로 내부 화학적 특성이 유사한 셀을 선별하였다.

  • PDF

전기자동차 배터리의 에너지 저장장치로의 재사용에 관한 연구 (Research on the Re-Use of Electric Vehicle Battery for Energy Storage Systems)

  • 부하이남;최우진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.345-346
    • /
    • 2016
  • The grid-connected energy storage systems, which could increase the reliability, efficiency, and cleanliness of the grid is presently restricted by the high cost of batteries. This problems could be solved by batteries retired from automotive services. These batteries can provide a low-cost system for energy storage and other applications such as residential applications and renewable energy integration. This paper gives an overview of technical requirements for the re-use of the electric vehicle batteries in energy storage systems.Firstly, the motivation of research is introduced. Secondly, the technologies needed for the re-use of the battery are introduced such asidentification of the battery characteristics, grading of the aged batteries, identification of the state-of-charge and state-of-health of the battery and suitable power electronic converter topologies. In addition the control strategy to maximize the battery lifespan and bypass the faulty batteries is presented and one-stop solution to implement the above mentioned technologies are also given.

  • PDF

영전압 방전 기능을 갖는 새로운 배터리 충방전시스템 (A Novel Battery Charge/Discharge System with Zero Voltage Discharge Function)

  • 응웬쾅만;최우진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2013년도 전력전자학술대회 논문집
    • /
    • pp.169-170
    • /
    • 2013
  • One important test for formation and grading of the lithium-ion battery is to confirm the performance of the battery while discharging battery down to zero volts. In this paper, a novel charge/discharge converter with zero-voltage discharge function is proposed. The proposed converter is able to discharge the battery until the voltage reaches to zero volts. The phase-shifted full bridge method is used to charge the battery and the current-fed push-pull method with bidirectional switches is used for the discharge. The ZVS turn-on is achieved in the charge operation and the ZVS turn-off in the discharge operation. The performance of the system is verified by the experiments using lithium-ion batteries.

  • PDF

리튬배터리의 잔여 유효 수명 추정을 위한 배터리 모듈용 AC 임피던스 스펙트럼 측정장치 (An AC Impedance Spectrum Measurement Device for the Battery Module to Predict the Remaining Useful Life of the Lithium-Ion Batteries)

  • 이승준;파르한 파루크;칸 아사드;최우진
    • 전력전자학회논문지
    • /
    • 제25권4호
    • /
    • pp.251-260
    • /
    • 2020
  • A growing interest has emerged in recycling used automobile batteries into energy storage systems (ESSs) to prevent their harmful effects to the environment from improper disposal and to recycle such resources. To transform used batteries into ESSs, composing battery modules with similar performance by grading them is crucial. Imbalance among battery modules degrades the performance of an entire system. Thus, the selection of modules with similar performance and remaining life is the first prerequisite in the reuse of used batteries. In this study, we develop an instrument to measure the impedance spectrum of a battery module to predict the useful remaining life of the used battery. The developed hardware and software are used to apply the AC perturbation to the used battery module and measure its impedance spectrum. The developed instrument can measure the impedance spectrum of the battery module from 0.1 Hz to 1 kHz and calculate the equivalent circuit parameters through curve fitting. The performance of the developed instrument is verified by comparing the measured impedance spectra with those obtained by a commercial equipment.

A NONDESTRUCTIVE NIR SPECTROMETER : DEVELOPMENT OF A PORTABLE FRUIT QUALITY METER

  • L, Susumu-Morimoto;Hitoshi Ishibashi;Toshihiro Takada;Yoshiharu Suzuki;Masayuki Kashu;Ryogo Yamauchi
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1155-1155
    • /
    • 2001
  • The quality of agricultural products is very important factor for consumers. In Japan, quality is sometimes more important than cost. Usually, the quality of fresh food products is determined in terms of shape, color, size, etc. However, these indices are not always associated with taste, leaving consumers to complain. Recently, two types of the fruit quality meter (a tabletop type - K-FS200 and a portable type - K-BA100, Kubota Corp.) using NIR technology were introduced in Japan. A tabletop instrument is for post harvest use and a portable one is for precision agriculture use. The both meters use the NIR region from 600nm to 1000nm in the interactance mode to determine quality factors related to taste. The instruments can measure sugar content and acidity of such fruit as apples, tomatoes, tangerines and other fruits. The measurement is timely, nondestructive and precise. For example, the coefficient of variation (CV) is less than 6% for sugar in most fruits. The K-FS200 has been evaluated in supermarkets, grading facilities, and wholesalers in Japan. The introduction of the K-FS200) has drawn attention to taste quality and its use is becoming more popular. In addition, researchers or farmers are becoming interested in measuring product ingredient not only after harvest but also during growing in the field so that they can make intelligent judgements concerning soil amendments, such as fertilizers and water, employs the fiber probe for flexible measurement and is battery powered for field use. Design of the fruit quality meters will be discussed. Applications to fruit quality will be presented.

  • PDF

음파를 이용한 비파괴 수박 내부품질 판정 시스템 개발 (Development of Nondestructive Evaluation System for Internal Quality of Watermelon using Acoustic Wave)

  • 최동수;이영희;최승렬;김기영;박종민
    • 한국식품저장유통학회지
    • /
    • 제16권1호
    • /
    • pp.1-7
    • /
    • 2009
  • 음파를 이용한 수박의 내부품질을 비파괴적으로 판정하는 시스템을 개발하였다. 개발된 수박품질판정기는 크기가 $200{\times}200\;mm$, 무게가 290 g로 휴대가 가능하여 수박 재배포장, 집하장, 슈퍼마켓 등 현장에서 쉽게 사용가능하도록 개발하였다. 수박의 음파수집한 후 음파데이터에서 영교차율, 피크(peak)점간 거리 표준편차, 시간파형에서 진폭 적분값, 주파수대역 에너지, 영점빈도수와 같은 특징인자를 추출하여 내부품질을 판정할 수 있는 주성분회귀 모델개발에 이용하였다. 개발된 수박의 주성분회귀 모델의 상관계수는 0.79, SEC는 0.28로 판정정확도는 87% 이었으며, 모델 검증한 결과 상관계수가 0.78, SEP가 0.785로 판정정확도가 83%이었다. 생산자 내부품질판정 정확도를 조사한 결과, 생산자 판정 정확도는 75% 이었다.