• Journal of the Korean earth science society
• /
• v.24 no.7
• /
• pp.650-656
• /
• 2003

Since the year 2000, emphasis has been placed on a more strict evaluation of national academic societies and their journals, which has caused most societies to endeavour to produce higher quality journals and research. Korean Earth Science Society (KESS) should be such an exemplary model. Thus, the purpose of this study was to isolate characteristics of well-evaluated academic societies and explore the direction KESS should proceed to better its educational agents and strengthen its research contributions. Back in 2002, the Korean Research Foundation graded the journal of KESS as an officially qualified journal. It was bequeathed the first institute to be registered in the category of Earth Science. Furthermore, such classification was accepted as national academic classification and Scientific Citation Index through a public hearing executed by the Korea Institute of Science and Technology Evaluation and Planning in 2003. Currently, the Korean Research Foundation is reviewing a proposal to approve Earth Science as a unique citation index category. This proposal is quite crucial in that such an approval would be followed by increased funding and affect the future status of KESS. More support and interest from all members of KESS are required to establish the identity of Earth Science as an independent academic entity.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.2
• /
• pp.109-119
• /
• 2006

Objectives: A number of studies in economically developed countries have shown occurrence of stroke and cardiovascular disease to be inversely related to socioeconomic class. The purpose of this study is to investigate socioeconomic differentials in stroke and cardiovascular disease mortality in Korea. Methods: Two data from two sources, registry data from National Health Insurance Corporation and death certification data from National Statistics Office, were used to calculate mortality rate for five socioeconomic classes. Poisson regression analysis was used to calculate relative indices of inequality as a measure of mortality differentials between socioeconomic classes. Results: For males, graded socioeconomic differentials in mortality were observed with higher mortality rates related to lower socioeconomic class for intracerebral hemorrhage, cerebral infarct, hypertension, ischemic heart disease, myocardial infarct, and arrhythmia. The relative index of inequality for stroke and cardiovascular disease was 1.61(95% CI=1.54-1.68). For females, these differentials were observed for arrhythmia and intracerebral hemorrhage. The relative index of inequality was 1.06(95% CI=1.02-1.11). Conclusions: This socioeconomic differential in mortality, consistent with the results of other studies performed in economically developed countries suggest that Socioeconomic class can influence mortality regardless of the developmental stage of the country.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.55-61
• /
• 2016

This paper presents the geotechnical characteristics of the soil mixed with various waste(waste soil) in the landfill. The physical and mechanical tests were conducted to find out the waste soil. The tests include the gradation, consistency tests, shear and compression and the consolidation tests using both the Rowe cell and the constant ration stress. The analyses of the test results show the waste soil belongs to the well graded sand(SW) in the laboratory and sand-gravel(SG) to fine sand(SF) in the field monitoring based on the unified classification soil system. The shear strength is increasing with increasing the shear displacement, however, the peak of the shear strength does not appear through the test and there is no distinct peak value of the strength obtained. The compression index(Cc) results in as increasing the amount of the sludge included and the compression index is proportional to the sludge included, which means more settlement is expected. The hydraulic conductivity of the waste soil ranges between $1.6{\times}10^{-5}cm/sec$ and $1.8{\times}10^{-7}cm/sec$.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.859-867
• /
• 2014

This study was conducted to evaluate the optimum dietary lipid level in juvenile river puffer. Five semi-purified diets were formulated with corn oil to contain graded levels of lipid levels of 6, 9, 12, 15 and 18%. Fish averaging $8.32{\pm}0.02$ g randomly were fed the experimental diets in triplicate groups for 8 weeks. After the 8-weeks feeding trial, weight gain and specific growth rate of fish fed the 9% diet were significantly higher than those of fish fed the 15 and 18% diets (P<0.05) but there was not significantly different from that of fish fed the 6, 9 and 12% diets. Feed efficiency and protein efficiency ratio of fish fed the 6, 9 and 12% diets were significantly higher than those of fish fed the 18% diet (P<0.05). Visceralsomatic index of fish fed 18% diet was significantly higher than that of fish fed the 6% diet (P <0.05) but there was not significantly different from that of fish fed the 9, 12, 15 and 18% diets. No significant differences were observed in condition factor, hepatosomatic index and whole body composition among all the fish groups. Serum cholesterol and triglyceride fish fed of 18% diet were significantly higher than that of fish fed the other diets (P<0.05). Optimum dietary lipid levels by using broken-line model and by using second order polynomial were estimated at 7.01% and 8.98% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary lipid level could be greater than 7.01% but less than 8.98% for the maximum growth in juvenile river puffer.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.915-922
• /
• 2014

This study was conducted to evaluate the optimum dietary protein level in juvenile river puffer. Five semi-purified diets were formulated by using casein to contain graded levels of protein levels of 35, 45, 50, 55 and 65%. Fish averaging $8.56{\pm}0.04g$ were randomly assigned to one of five experimental diets in triplicate groups for 8 weeks. After the 8-weeks of feeding trial, weight gain and feed efficiency of fish fed 45, 50 and 55% diets were significantly higher than those of fish fed 35 and 65% diets (P<0.05). Protein efficiency ratio of fish fed the 35% diet was significantly higher than those of fish fed 65% diet (P<0.05), but there were no significant difference among those of fish fed 45, 50 and 55% diets. Specific growth rate of fish fed 50% diet was significantly higher than those of fish fed 35 and 65% diets (P<0.05), but there was no significant difference among those of fish fed 45, 50 and 55% diets. No significant differences were observed in condition factor, hepatosomatic index, visceralsomatic index and survival among those of fish fed all the diets. Optimum dietary protein levels by using broken-line model and by using second order polynomial were estimated at 45.9% and 51.6% for the maximum growth of fish respectively. Therefore, these results suggested that the optimum dietary protein level could be greater than 45.9% but less than 51.6% for the maximum growth in juvenile river puffer.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.583-589
• /
• 2019

We report experimental results on 940-nm 350-mW AlGaAs/InGaAs transverse single-mode laser diodes (LDs) adopting graded-index separate confinement heterostructures (GRIN-SCH) and p,n-clad asymmetric structures, with improved temperature and small-divergence beam characteristics under high-output-power operation, for a three-dimensional (3D) motion-recognition sensor. The GRIN-SCH design provides good carrier confinement and prevents current leakage by adding a grading layer between cladding and waveguide layers. The asymmetric design, which differs in refractive-index distribution of p-n cladding layers, reduces the divergence angle at high-power operation and widens the transverse mode distribution to decrease the power density around emission facets. At an optical power of 350 mW under continuous-wave (CW) operation, Gaussian narrow far-field patterns (FFP) are measured with the full width at half maximum vertical divergence angle to be 18 degrees. A threshold current (I_th) of 65 mA, slope efficiency (SE) of 0.98 mW/mA, and operating current (I_op) of 400 mA are obtained at room temperature. Also, we could achieve catastrophic optical damage (COD) of 850 mW and long-term reliability of 60℃ with a TO-56 package.

• The Journal of Internal Korean Medicine
• /
• v.25 no.4
• /
• pp.158-166
• /
• 2004

Background & Object : The aim of this study was to investigate the usefulness of electrogastrography in the diagnosis field of traditional medicine through a study of the relationship between gastric motility and health condition based on oriental medicine diagnostic theory in functional dyspepsia. Method : 86 patients (male 27, female 59) with functional dyspepsia and 10 healthy control subjects (male 5, female 5) were involved in the investigation. The disease information of functional dyspepsia (based on Rome criteria II) was used for dyspeptic index and scores were obtained from the comprehensive diagnosis of Qui, Xue, Shui was applied as index for health condition, those were all investigated by questionnaire. Gastric motility were recorded and analyzed using electrogastrography in fasting and postprandial period. Results : The total score of comprehensive diagnosis of Qui Xue Shui was influenced by the number of functional dyspepsia symptoms (p=0.026). In terms of electrogastrographical parameters, both postpranial normal slow waves regularity(p=0.003) and power ratio (p=0.001) in the patients had the statistical significance and they showed an incremental inverse correlation with the number of symptoms. Dominant frequency and fasting normal slow waves regularity ratio had no statistical significance. Conclusion : Results suggest that electrogastrography is useful in evaluating the health condition of patient by comprehensive diagnosis of Qui Xue Sui.

• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• Journal of Oral Medicine and Pain
• /
• v.47 no.3
• /
• pp.117-125
• /
• 2022

Purpose: This study aimed to investigate whether and how the biopsychosocial features of myofascial pain (MFP) differ from those of local myalgia (LM) in temporomandibular disorder (TMD). Methods: Patients with TMD were retrospectively evaluated using the Diagnostic Criteria for TMD. All patients completed a series of self-administered questionnaires on pain severity and pain interference (Brief Pain Inventory, BPI), pain disability (Graded Chronic Pain Scale, GCPS), psychological distress (Symptom Check List-90-Revised, SCL-90R), pain cognition (Pain Catastrophizing Scale, PCS), and subjective sleep quality (Pittsburgh Sleep Quality Index, PSQI). Among all the TMD diagnoses, muscle pain was classified into the MFP group and LM group. Results: This study included 917 patients with myalgia (MFP: 266, LM: 651). Significant differences were observed in the female ratio (78.9% for MFP, 60.9% for LM, p<0.001) and the mean pain duration (MFP: 25.3 months, LM: 15.8 months, p=0.001) between the two groups. Patients with MFP exhibited higher pain severity (p=0.003) and pain interference (p<0.001) of BPI than those with LM. Furthermore, the global scores of the PCS (p<0.001) and PSQI (p<0.001) were higher in the MFP group than in the LM group. The MFP group had higher global symptom index (p=0.017) and five subscales of the SCL-90R than the LM group. Compared with the LM group (33.4%), the greater proportion of high disability of GCPS was observed in the MFP group (44.9%) (p<0.001). Multiple regression analysis revealed that sex (p=0.002), pain duration (p=0.019), pain disability (p=0.010), and subjective sleep quality (p=0.008) significantly differed between the two groups. Conclusions: The findings of this study indicated that MFP presents a higher biopsychosocial burden than LM in TMD.

• Structural Engineering and Mechanics
• /
• v.73 no.3
• /
• pp.225-238
• /
• 2020

This work treats the axisymmetric buckling of functionally graded (FG) porous annular/circular nanoplates based on modified couple stress theory (MCST). The nanoplate is located at the elastic medium which is simulated by Kerr foundation with two spring and one shear layer. The material properties of the porous FG nanostructure are assumed to vary through the nanoplate thickness based on power-law rule. Based on two variables refined plate theory, the governing equations are derived by utilizing Hamilton's principle. Applying generalized differential quadrature method (GDQM), the buckling load of the annular/circular nanoplates is obtained for different boundary conditions. The influences of different involved parameters such as boundary conditions, Kerr medium, material length scale parameter, geometrical parameters of the nanoplate, FG power index and porosity are demonstrated on the nonlinear buckling load of the annular/circular nanoplates. The results indicate that with increasing the porosity of the nanoplate, the nonlinear buckling load is decreased. In addition, with increasing the material length scale parameter to thickness ratio, the effect of spring constant of Kerr foundation on the buckling load becomes more prominent. The present results are compared with those available in the literature to validate the accuracy and reliability. A good agreement is observed between the two sets of the results.