• Elastomers and Composites
• /
• 제27권2호
• /
• pp.89-101
• /
• 1992

This paper is concerned with analysis for market trend and technological tendency of rubber-use black among United state, Japan and Korea, Through this comparative analysis, the subjects with which domestic carbon black industry is confronted are : first, development of new grade carbon black such as high performance carbon black, Low rolling resistance carbon black and lower grit carbon black, Second, reduction of quality fluctuation, third, improvement of applied technology and fourth, strengthening the price competitiveness through process optimization and productivity increase.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.276-285
• /
• 2020

본 연구에서는 3가지 수준의 물-결합재 비를 고려한 OPC 및 FA 콘크리트를 대상으로 재령 1,095일에 촉진 염화물 확산 시험을 수행하였다. Tang's method 및 ASTM C 1202에 준하여 촉진 염화물 확산계수 및 통과 전하량을 평가하였으며 시간의 존적으로 개선되는 염화물 확산 거동을 고찰하였다. FA 배합에서는 포졸란 반응에 의해 뛰어난 염해저항성능을 나내었는데, 통과 전하량 평가 결과에 따르면 FA 콘크리트는 재령 1,095일에 "Low" 등급에서 "Very low" 등급으로 감소하였으나, OPC 배합의 경우 "Moderate" 등급에서 "Low" 등급으로 감소하였다. 염해 내구수명 해석 시 사용되는 설계변수를 정규분포 함수로 가정한 후, MCS를 기반으로 각 배합의 내구수명을 확률론적 해석 방법으로 평가하였다. FA 콘크리트에서는 OPC 콘크리트 대비 시간의 증가에 따른 내구적 파괴확률의 증가가 낮게 나타났는데 이는 FA 콘크리트의 시간의존성지수가 OPC 배합 대비 최대 3.2배 높기 때문이다. 또한 목표 내구적 파괴확률을 10%로 설정하였기 때문에 확률론적 해석에 의한 내구수명이 결정론적 해석에 의한 내구수명보다 낮게 평가되었다. 다양한 환경 하의 실태조사 및 실내 시험을 통해 각 구조물에 적합한 목표 내구적 파괴확률을 설정한다면 더욱 경제적인 내구성능 설계가 가능해지리라 사료된다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.66-69
• /
• 2009

To manufacture YBCO-coated conductors as superconducting fault current limiters, it is important to conduct researches on their durability. To test their durability, it is necessary to investigate their properties before and after the quench in more severe conditions than in general operating conditions. In this study, their voltage-current and resistance properties were measured before and after a fault current was repetitively applied to them. For the applied voltage, the voltage grades of the YBCO coated conductors were considered. The current amplitude was controlled using protective resistance on an experimental track, and the time and number of applications were fixed to produce the quench occurrence at the fault angles of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$. The operating conditions of the YBCO coated conductors as the main components of superconducting fault current limiters were determined using their voltage properties. The voltage properties of the YBCO coated conductors that were analyzed in this research will be used as important data for their practical application to superconducting fault current limiters.

• 한국전기전자재료학회논문지
• /
• 제30권6호
• /
• pp.376-380
• /
• 2017

In this paper, we prepared a metal alloy resistor with stable thermal electro motive force (thermal EMF) as well as a low temperature coefficient of resistance (TCR) by adjusting the manganese proportion from 3 to 12 wt% in the Cu-Mn-Ni alloy. Composition of the fabricated metal alloy was investigated using energy dispersive X-ray (EDX) analysis. The TCR of each sample was measured as 44.56, 40.54, 35.60, and 31.56 ppm for Cu-3Mn-2Ni, Cu-5Mn-2Ni, Cu-10Mn-2Ni, and Cu-12Mn-2Ni, respectively. All the resistor samples were available for the F grade (${\pm}1%$ of the allowable error of resistance) high-precision resistor. All the samples satisfied the baseline of high thermal EMF (under 3 mV at $60^{\circ}C$); however, Cu-3Mn-2Ni and Cu-5Mn-2Ni satisfied the baseline of low thermal EMF (under 0.3 mV at $25^{\circ}C$). We were thus able to design and fabricate the metal alloy resistor of Cu-3Mn-2Ni and Cu-5Mn-2Ni to have low TCR and stable thermal EMF at the same time.

• Journal of Welding and Joining
• /
• 제8권2호
• /
• pp.40-52
• /
• 1990

Fatigue behavior of the AH, DH and EH grade TMCP(Thermo-Mechanical Control Process) steels was studied. High cycle and low cycle fatigue tests were carried out for the weldment and base metal of each steel. The results showed that the fatigue limit at 2 * $10^6$ cycles was 33 to 37 kg/$mm^2$ for the base metal and 30 to 34 kg/$mm^2$ for the weldment. The ratio of fatigue limit to tensile strength for TMCP steels was 0.65 to 0.71, which was a value close to the upper limit for the ordinary steels. It was also found that the high cycle fatigue behavior of TMCP steels could be affected by the microstructures of base metal. It will be necessary to have fine structure for TMCP steels to increase the fatigue resistance. In low cycle fatigue test, the fatigue lifetime of AH and DH steels accorded well with the ASME best fit curve, while that of EH steel was considerably lower than the fatigue lifetime of the other steels. Fatigue resistance of the weldment made by high heat input(180kJ/cm) welding was not lower than that made by low heat input(80kJ/cm) welding in case of high cycle fatigue, but the high heat input welding decreased the fatigue resistance in case of low cycle fatigue.

• Carbon letters
• /
• 제7권1호
• /
• pp.19-26
• /
• 2006

Three point bending tests of single edge notched beam (SENB) specimens were carried out to evaluate the fracture behavior of the fine-grain isotropic nuclear grade graphite, IG-11. To measure the crack initiation point and the subsequent crack growth, the direct current potential drop (DCPD) method and a traveling microscope were used. The effects of test variables like initial crack length, specimen thickness, notch type and loading rate on the measured fracture toughness, $K_Q$, were investigated. Based on the test results, the ranges of the test variables to measure the reliable fracture toughness value were proposed. During the crack growth, the rising R-curve behavior was observed in IG-11 graphite when the superficial crack length measured on the specimen surface was used. The increase of crack growth resistance was discussed in terms of crack bridging, crack meandering, crack branching, microcracking and crack deflection, which increase the surface energy and friction force.

• 대한전자공학회논문지SD
• /
• 제44권7호통권361호
• /
• pp.1-8
• /
• 2007

고주파에서 동작하는 높은 출력전력과 dc-rf 변환효율을 가진 GaAs Gunn 다이오드에 대한 기본 연구로써, graded gap injector를 가진 planar 형태의 GaAs Gunn 다이오드를 제작하고 그 DC 특성을 살펴보았다. 제안된 에피 구조를 사용하여 GaAs Gunn 다이오드 소자를 설계, 제작하였으며 이동전자소자인 Gunn 다이오드의 DC 특성이 부성미분저항을 가짐을 확인하였다. 제작된 소자의 부성미분저항 특성을 다이오드의 cathode 반지름의 함수로 고찰하였으며, 이 과정을 통하여 계곡 간 전자이동 특성을 분석하였다.

• 한국표면공학회지
• /
• 제27권4호
• /
• pp.193-206
• /
• 1994

A wear behavior of electroless (Ni-P-X, X: SiC, $Al_2O_3$, Diamond) composite coating layers, formed under various conditions on commerical grade low carbon steel, has been investigated using Taber abrasion tester and scanning electron microscope. Several factors, which are type of particles, co-deposited content, particle size, distribution of particles and heat-treatment, influenced the wear resistance. The wear resistance of the composited coating layers after heat-treatment at $400^{\circ}C$ for 1 hr was increased 70 times with diamond, 15 times with SiC and 8 times with $Al_2O_3$, compared with the electroless nickel plating layer without heat-treatment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권4호
• /
• pp.1643-1649
• /
• 2015

Background: The aim of the present study was to evaluate clinicopathological characteristics of our early stage breast cancer patients who are epidermal growth factor receptor 2 (HER2) overexpressed/amplified (HER2+), the efficacy of trastuzumab treatment and survival results. Materials and Methods: Patients with HER2-positive early stage breast cancer receiving adjuvant trastuzumab were investigated retrospectively. Clinicopathological features of 210 patients and treatment outcome were analysed. To evaluate survival rates, the Kaplan-Meier method was used. Univariate and multivariate analyses were conducted with the Cox regression model. Results: Mean age of the patients was 51.8, 71.9% being postmenopausal. Some 37.6% of patients were node negative, and 31% had T1 tumor size and 52.4% were positive for estrogen receptor. Of 210 patients, 89.5% completed planned 52 weeks adjuvant trastuzumab treatment. The median follow up was 27.5 months (6.0-86.0). Relapse free survival (RFS) was 68.0 months (95% CI: 62.1-74.0) and overall survival (OS) was 74.8 months (95% CI: 69.5-80.1). The 3 year OS for all patients was 92.0% and RFS was 79.6%. During follow up, relapse was detected at the rate of 14.3%. Trastuzumab associated cardiotoxicity was found at the rate of 3.3%. In univariate analyses, larger tumor size and grade III were significantly associated (p<0.05) with RFS. Multivariate analyses of covariates displaying p<0.05 identified grade III as an independent prognostic factor. Conclusions: In the present study, it was established that trastuzumab had a satisfactory safety profile and treatment efficacy as in other clinical studies and that among clinicopathological factors evaluated, only being grade 3 had a significant effect on RFS. The occurrence of relapse with adjuvant trastuzumab makes it necessary to identify molecular predictors, which will define this group better and help explain resistance to anti HER2 based therapies.

• 공업화학
• /
• 제1권2호
• /
• pp.168-175
• /
• 1990

1, 2-Disubstituted imidazoline 화합물인 1-behenoylaminoethyl-1-glycidyl-2-heneicosylimidazolinium chloride(BHIC), 1-behen oylbis(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BBIC) 및 1-behenoyltris(aminoethyl)-1-glycidyl-2-heneicosylimidazolinium chloride(BTIC)로부터 유연제 원액인 BHICS, BBICS, BTICS를 각각 제조하여 아크릴섬유에 유연처리를 한 후 유연성, 평활성 및 대전방지성을 측정한 결과 유연제 모두 유연성과 평활성이 양호하였으며 약간의 대전방지성도 보유하였다. 또한 BBICS와 BTICS의 초기강연도는 5 grade, 5회 세탁후는 3~4 grade로 각각 나타나 내수성을 지닌 양호한 유연효과를 나타내었다. 아울러 처리온도에 따른 촉감의 내세탁성 및 pH 변화에 따른 촉감의 내세탁성 시험결과 등을 통하여 제조된 유연제가 내구성 유연제임을 입증하였다.