• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.559-561
• /
• 1992

Three strains each of L. bulgaricus and S. thermophilus isolated from indigenous dahi were examined for their rate of acid production and corresponding pH values in skim milk medium incubated at $40^{\circ}C$. No significant increase in titrable acidity or decrease in pH were recorded from initial period up to 2nd hour in both the strains. Following this period, however, there was a continuous increase in titrable acidity and a decrease in pH value in the milk for all the tested strains. Further it was observed that there was a variation among these strains for their acid production rate. High rate of acid production was recorded for the L. bulgaricus as compared to S. thermophilus. The results further, suggested that efforts should be made to select a proper pair of L. bulgaricus and S. thermophilus according to their rate of acid production, at a particular temperature in order to produce a good quality product.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.470-473
• /
• 2004

This paper presents conducted emission noise measurement from electronic equipment in frequency range of 1 MHz up to 30 MHz by small loop antenna. Small loop antenna measurement method can measure common-mode (CM) and differential-mode (DM) component of the noise on a pair of power line at the same time. The CM and DM can be measured separately. The theory of this measurement method is introduced and analyzed. The measured results were compared with the conventional measurement by Line Impedance Stabilization Network (LISN) and result a good trend between those methods.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.31-34
• /
• 2000

Genetic Algorithm is well known as the efficient algorithm which can solve a difficult optimization problem. Recently, there has been increasing interest in applying genetic algorithm to problem related to network design. In this paper, we propose a two-step genetic algorithm for designing a optimum virtual path network(VPN) for a given physical network and traffic demand. The first step is a routing step in which a route is found between every node pair in the network. In the second step, paths are assigned as VPs so as to minimize the total number of VPs configured, the number of VPs carried by a link, and the VP hopcount. We study the performance of the propose algorithm through simulation. The result shows that the VPN generated by the proposed algorithm is good in minimizing the number of VPs configured, the load on a link, and the VP hopcount.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.144-150
• /
• 2000

Surface roughness is one of the most important parameters to estimate quality of products. As this reason so many studies were car-ried out through various attempts that were contact or non-contact using computer vision. Even through these efforts there were few good results in this research., however texture analysis making a important role to solve these problems in various fields including universe aviation living thing and fibers. In this study feature value of co-occurrence matrix was calculated by statistic method and roughness value of worked surface was classified, of it. Experiment was carried out using input vector of neural network with characteristic value of texture calculated from worked surface image. It's found that recognition rate of 74% was obtained when adapting texture features. In order to enhance recogni-tion rate combination type in characteristics value of texture was changed into input vector. As a result high recognition rate of 92.6% was obtained through these processes.

• Journal of the Korean Society of Visualization
• /
• v.1 no.1
• /
• pp.92-97
• /
• 2003

A new Stereoscopic PTV was developed using two CCD cameras, stereoscopic photogrammetry based on a 3D-PTV principle. Virtual images were produced for the benchmark test of the constructed Stereoscopic PTV technique. The arrangement of the two cameras was based on angular position. The calibration of cameras and the pair-matching of the three-dimensional velocity vectors were based on the Genetic Algorithm based 3D-PTV technique. The constructed Stereoscopic PTV technique was tested on the standard images of the impinged jet proposed by VSJ. The results obtained by the constructed system showed good agreements with the original data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.494-497
• /
• 2005

Direct velocity feedback (DVFB) control with a collocated distributed actuator and point sensor pair is known that it offers a good stability with high performance when the control strategy is applied at the suppression of structural vibration. Also decentralized control method introduced to offer to reduce implementaion effort and malfunction due to failure in sensors and actuators of control system has become an important position in DVFB. In this paper, the decentralized control is compared with centralized control in terms of vibrational velocity reduction in a clamped-clamped beam.

• MALSORI
• /
• no.46
• /
• pp.37-50
• /
• 2003

In this paper, we evaluate and compare the performance of speech/music discrimination based on various feature parameters and classifiers. As for feature parameters, we consider High Zero Crossing Rate Ratio (HZCRR), Low Short Time Energy Ratio (LSTER), Spectral Flux (SF), Line Spectral Pair (LSP) distance, entropy and dynamism. We also examine three classifiers: k Nearest Neighbor (k-NN), Gaussian Mixure Model (GMM), and Hidden Markov Model (HMM). According to our experiments, LSP distance and phoneme-recognizer-based feature set (entropy and dunamism) show good performance, while performance differences due to different classifiers are not significant. When all the six feature parameters are employed, average speech/music discrimination accuracy up to 96.6% is achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.652-655
• /
• 2002

The embedded atom method based on the density functional theory is used for calculating ground state properties of realistic metal systems. In this paper, we had corrected constitutive formulae and parameters on the palladium for the purpose of doing Embedded Atom Method analysis. And then we have computed the properties of the palladium on the fundamental scale of the atomic structure. In result, simulated ground state properties, such as the lattice constant, elastics constants and the sublimation energy, show good agreement with Daw's simulation data and with experimental data.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.101-105
• /
• 2004

A number of Chinese, Japanese and European silkworm strains with coarse size filament were used for breeding the coarse size variety. Through cross breeding combined with pedigree selection within thirteen generations, a pair of coarse size silkworm variety, named ${CU_1}{\times}{CU_2}$, was obtained after five years. Laboratory trials showed that the filament size of its 4F_1$ hybrid was over 4.3 D, and the other economic characters were also good.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.219-225
• /
• 2006

We consider a routing and wavelength assignment (RWA) for the efficient operation of WDM networks. For a given physical network, a set of selected pairs of nodes, the number of required connections for each selected pair of nodes, and a set of available wavelengths, the RWA is to realize as many connections as possible without wavelength collision. We give an integer programming formulation and an algorithm based on column generation. Though the proposed algorithm does not guarantee optimal solutions, test results show that the algorithm gives probably good solutions.