• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.235-244
• /
• 2017

'Manbaek' is a bacterial blight resistant mid-late maturing rice cultivar with high grain quality. 'Manbeak' was derived from anther culture using the backcross combination, $Hopum^*2/SR30075$. 'Hopum' is a mid-late maturing rice cultivar with high grain quality and 'SR30075' is a pyramid line carrying three bacterial blight resistance genes. 'Manbaek' was selected through the pedigree method, yield trials, and local adaptability tests. 'Manbeak' carrying two bacterial blight resistance gene Xa3 and xa5 showed high-level and broad-spectrum resistance against bacterial blight. 'Manbaek' was resistant to K3a, mostly virulent race in Korea, and exhibited resistance reaction against 16 Korean bacterial blight isolates. 'Manbaek' was a mid-late maturing rice. The heading date of 'Manbaek' was August 19th, which was 5 days later than that of 'Nampyeong'. Manbaek' was a lodging-tolerant rice with short culm and dark green leaf. Due to the low viviparous germination, 'Manbaek' could be a useful material to prevent pre-harvest sprouting. 'Mabeak' was resistant to bacterial blight and rice stripe virus, but susceptible to other virus diseases and insect pests. The yield of 'Manbaek' was similar to 'Nampyeong'. 'Manbaek' showed excellent grain appearance and good tastes of cooked rice, so that it could contribute to improving the quality of bacterial blight resistant cultivars. 'Manbaek', bacterial blight resistant cultivar with high grain quality, is suitable for the cultivation at bacterial blight prone area and has been utilized in the breeding programs for enhancing the resistance against bacterial blight (Registration No. 6069).

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.538-542
• /
• 2011

A new malting barley variety, 'Baegho', was developed from a cross between Azuma Golden and Nishinochikara in 1998. An elite line, YMB2139-2B-1-10-2, was selected in 2005 and designated as Milyang137. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2006 to 2008 and was released with the name of 'Baegho' having high yielding and BaYMV and powdery mildew resistance. The average heading and maturing dates of 'Baegho' were April 21 and May 28, which were 3 and 2 day later than those of Hopum, check variety, at the RYT, respectively. 'Baegho' has shoter culm length (78 cm), more spikes ($1,062per\;m^2$) and heavier 1,000 grain weight (40.7 g) than those of Hopum, respectively. 'Baegho' is resistant to domestic BaYMV strains I, III and IV and powdery mildew at Iksan. In growth habit, 'Baegho' is close to type (IV) that is distinguished from other Korean malting barley cultivars, which could tolerant to premature heading damage that is major concern for the practice of the malting barley cropping. The yield potential of 'Baegho' in the RYT was about 5.57 MT/ha, which is about 13% higher than those of Hopum. This variety has good malting quality in grain and malting analysis showed better 1,000 grain weight, husk rate, diastatic power than those of Hopum. 'Baegho' applied for protection of new varieties of plant in 2009.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.85-88
• /
• 2001

High oxygen pressure has been applied for a floating zone (FZ) crystal grower in order to grow high quality $TiO_2$(rutile) single crystals suitable for optical application. The $TiO_2$ crystals, grown under 0.3, 0.4, 0.5, and 0.8MPa oxygen pressure respectively, are all transparent and dark blue. The degree of the presence of sub-grain boundary in the crystal differs from the applied oxygen pressure. In particular, $TiO_2$ single crystals grown under0.5 MPa showed sub-grain boundary-free and estimated good for optical devices.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.75-75
• /
• 2017

Rye is cultivated on about 30,000ha domestically for forage and green-manure production in Korea. 'Daegokgreen' has been developed as a good quality rye cultivar for forage and green-manure, which was doubled-chromosome by colchicine treatment of diploid rye cultivar 'Gogu' in 2010. By the colchicine treatment with 0.05% for 12 hours at $2^{nd}$ leaf stage of 'Gogu', 31 tetraploid plants were obtained and they produced 2,470 seeds with 135 spikes. There was 4.4 in the number of spikes per plant, 18.3 in grain number per spike, and 37.6 g in the1,000-grain weight. The heading date of 'Daegokgreen' was April 11, which was two days later on average compared with 'Gogu'. The biomass (fresh weight) of 'Daegokgreen' was 3,701kg, which was similar to 'Gogu'. The average crude protein content of 'Daegokgreen' was 8.9%, which was 1.0% point higher than 'Gogu'. 'Daegokgreen' was found to be strong resistant to winter-kill and can be adapted to before maize cultivation.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.298-304
• /
• 2012

Since 1990's, a flooring based on plywood has gotten customers' demand. Costs of raw material and production increased because of changed environment of industry. Tropical timber such as Red Meranti (Shorea acuminate) used for raw material of the floor has been depleting beside countries in South Eastern Asia changed species of afforestation. As a result, it gets hard to secure good quality of raw material for plywood. Moreover plywood price is increased suddenly after earthquake in Japan. Eucalyptus (Eucalyptus globulus) in china has been using for raw material as a countermeasure of changed environment of industry. In this study, possibility of using flooring consisted of Eucalyptus veneer as a core layer was checked by heat transfer experiments. Flooring consisted of Red Meranti was used for comparison. Two factors which impact on heat transfer are a type of density gradient and density difference between Long-grain veneer and Short-grain veneer. Red Meranti samples are 'M' type of density gradient on the other hand Eucalyptus samples are 'W' type of density gradient.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.33-38
• /
• 2000

This study was performed to investigate airtight storage characteristics of rough rice using airtight flexible pve container. A storage test of rough rice of 4 tonnes was carried out to determine the changes of gas composition of air in the container, grain moisture content, air temperature and relative humidity , the presence of insects ,germination rate, crack ratio , fat acidity , 1000-kernel weight, and brown rice recovery over storage period of 5 months in Suwon. Concentration of oxygen was decreased from 20% to 16% and carbon dioxide was increased of from 0.03% to 1.6%. The grain moisture content was decreased from 14.4%(w.b) to 14.1%(w.b) for 5 months storage period . Insect population levels were low but these increased after 5 months storage. Most of insects were dead, Fat acidity increased from 7.5(mg KOH/100g) to 10.2(mg KOH/100g). Other storage factors such as germination rate, brown rice recovery and 1000-kernel , and 1000-kernel weight slightly decreased and crack ratio was slightly increased. Qualities of rough rice during 5 months storage period under hemetic air conditions were maintained fairly good considering the above changes of quality factors during storage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.16-23
• /
• 2017

This study aimed to determine the optimal harvesting time for covered barley to make grain silage, in Honam region of Korea. We harvested six varieties of barley every third day from 24 to 42 days after heading (DAH). The moisture content decreased from 62.4% at 24 DAH to 24% at 42 DAH. The moisture content at 36 DAH was 44.3%; however, moisture content at 39 and 42 DAH was lower than 40%. Yield of covered barley significantly increased from 24 to 42 DAH (p < 0.05). Yield at 36 DAH (557 kg/10a) was not significantly different from that at 39 and 42 DAH (p < 0.05). With respect to the feed value of barley grain silage, the amount of crude fiber and crude ash was different by harvesting time (p < 0.05). However, the amount of crude protein, crude fat, and total digestible nutrients (TDN) from 24 and 42 DAH was not significantly different. The pH of grain silage from 24 to 42 DAH was between 3.8 and 4.2 and it was stable until 36 DAH (p < 0.05). However, the pH of grain silage at 39 and 42 DAH was 5.2 and 5.8, respectively, which was higher than the pH of silage with good fermentation quality. The lactic acid content of barley grain silage from 24 to 42 DAH decreased from 5.5% to 0.5% (p < 0.05). The amount of lactic acid at 36 DAH was higher than that at 39 and 42 DAH (p < 0.05). With respect to moisture content, yield, feed value, and fermentation, the optimal harvesting time for grain silage of covered barley was 36 DAH. This could increase the use efficiency of harvesting machine for barley and reduce the harvesting time gap between whole barley silage and grain silage in Korea. Moreover, using barley grain silage for animal feed could reduce the import of corn.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.114-125
• /
• 2002

As semi-solid forging (SSF) is compared with conventional easting such as gravity die-easting and squeeze casting, the product without inner defects can be obtained from semi-solid forming and globular microstructure as well. Generally speaking. SSF consists of reheating, forging, ejecting precesses. In the reheating process, the materials are heated up to the temperature between the solidus and liquidus line at which the materials exists in the form of liquid-solid mixture. The process variables such as reheating time, reheating temperature, reheating holding time, and induction heating power have much effect on the quality of the reheated billets. It is difficult to consider all the variables at the same time when predicting the quality. In this paper, Taguchi method, regression analysis and neural network were applied to analyze the relationship between processing conditions and solid fraction. A356 alloy was used for the present study, and the learning data were extracted by the reheating experiments. Results by neural network were on good agreement with those by experiment. Polynominal regression analysis was formulated by using the test data from neural network. Optimum processing condition was calculated to minimize the grain size, solid fraction standard deviation, otherwise, to maximize the specimen temperature average. In this time, discussion is liven about reheating process of row material and results are presented with regard to accurate process variables for proper solid fraction, specimen temperature and grain size.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.294-294
• /
• 2017

Rice (Oryza sativa L.) is one of the main agricultural crops in Asian countries, including Korea, and is considered as the most important staple food in the world. Rice is also processed into flour, which is consumed through various foods such as cake, noodle, bread, and confectionary. Rice flour quality is highly dependent on variety and milling conditions. Producing rice flour with fine particles is more difficult than wheat flour because of its grain hardness. The Korean rice varieties representing different amylose contents were selected for this study. The relationship between the morphological and starch characteristics of rice kernels and the appropriate varieties for producing good-quality, dry-milled rice flour were examined. The hardness of the rice kernels was determined by measuring the pressure at the grain breakage point. The damaged starch content of the rice flour was determined using a Megazyme starch damage assay kit. The particle-size distribution of the rice flour was measured as the volume-base distribution using a laser-diffraction particle size analyzer. The mean particle-size distribution of the dry-milled flour obtained was between $65.3{\sim}105.1{\mu}m$ among the rice varieties. The opaque, non-glutinous, Seolgaeng rice demonstrated a narrow peak at the fine size, whereas the entire particle-distribution range for other varieties was wide. Seolgaeng exhibited significantly lower damaged starch content of dry-milled flour than the other varieties (p < 0.05). Seolgaeng showed lowest in energy consumption on rice flour production with 200 mesh particle size. Accordingly, it is possible to produce dry-milled rice flour which is similar to wheat flour that would considerably reduce milling costs.