• Journal of the Korean Operations Research and Management Science Society
• /
• v.12 no.2
• /
• pp.42-50
• /
• 1987

This objective of this paper is to develop an efficient method with small memory requirement for a feed-mixing problem on a micro computer. First this method uses the decomposition principle to reduce the memory requirement. Next, the decomposition principle is modified to fit the problem. Further four different variations in solving subproblems are designed in order to improve efficiency of the principle. According to the test with respect to the processing time, the best variation is such that the dual simplex method is used, and the optimal basis of a previous subproblem is used as an initial basis, and the master problem is (M +1) dimensional. In general, the convergence of solution becomes slower near the optimal value. This paper introduces a termination criterion for a sufficiently good solution. According to the test, 5%-tolerence is acceptable with respect to the relation between the processing time and optimal value.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.194-198
• /
• 2010

The effective Young’s modulus of a microfibril surrounded by water may be simply calculated by using the upper (Voigt) and lower (Reuss) bounds, which is one way to estimate the Young’s modulus in composite materials. The Steered Molecular Dynamics (SMD) has been used for estimating the Young’s modulus of a microfibril surrounded by water. In this paper, the result estimated by the upper (Voigt) and lower (Reuss) bounds shows 9.2% to 21.8% discrepancy from the result estimated by SMD, but introducing “efficiency of reinforcement parameter” removes the discrepancy and shows good agreement with the result estimated by SMD. We found the best fit for the Young’s modulus against the size of the gap between microfibrils. Also the steps using these bounds are much simpler than SMD.

• Nutrition Research and Practice
• /
• v.5 no.1
• /
• pp.73-79
• /
• 2011

In order to promote foodservice for the elderly, foodservice managers in Continuing Care Retirement Communities (CCRCs) must identify the main factors to enhance the satisfaction and behavioral intentions with food service. The purpose of this study was to investigate the relationships between relationship quality (consisting of trust, commitment, and satisfaction) and communication in the formation of elderly's behavioral intentions with food services at CCRCs. A survey was administered to residents in two CCRCs and a total of 327 residents participated. A tested structural equation model exhibited good model fit and explanatory power of the study construct. Satisfaction directly influenced word-of-mouth and service quality has an influence on commitment. Commitment was a significant determinant of behavioral intentions to eat more often in the dining room. Also, communication showed positive association with trust. The results provided strong evidence for the importance of satisfaction and communication as a consequence of relationship marketing efforts. Suggestions for future research to better understand the elderly' behavioral intention judgments were given.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.102-111
• /
• 2000

As IR-sensor for detecting pollution material, the iron silicide has a fit band gap, high physicochemical stability at high temperature and good acid resistance. The growing film was formed with the Fe-Si bond and the organic compound because plasma resolved the injected precursors into various active species. In the Raman scattering spectrum, the Fe-Si vibration mode showed at 250 {TEX}$cm^{-1}${/TEX}. The FT-IR peak indicated that the various organic compounds were deposited on the films. The iron silicide was epitaxially grown to β-phase by the high energy of plasma. The lattice structure of films had [220]/[202] and [115]. The thickness of the films increased with the flow rate of silane. But rf-power increased with decreasing the thickness. The optical gap energy and the band gap were shown about 3.8 eV and 1.182∼1.194 eV. The band gap linearly increased and the formula was below: {TEX}$E_g^{dir}${/TEX}= 8.611×{TEX}$10^{-3}N_{D}${/TEX}＋1.1775

• Journal of Computational Design and Engineering
• /
• v.1 no.4
• /
• pp.289-297
• /
• 2014

Although big-sized markers are good for accurate marker recognition and tracking, they are easily occluded by other objects and deteriorate natural visualization and level of immersion during user interaction in AR environments. In this paper, we propose an approach to exploiting the use of rectangular markers to support tangible AR interaction based on fingertip touch using small-sized markers. It basically adjusts the length, width, and interior area of rectangular markers to make them more suitably fit to longish objects like fingers. It also utilizes convex polygons to resolve the partial occlusion of a marker and properly enlarges the pattern area of a marker while adjusting its size without deteriorating the quality of marker detection. We obtained encouraging results from users that the approach can provide better natural visualization and higher level of immersion, and be accurate and tangible enough to support a pseudo feeling of touching virtual products with human hands or fingertips during design evaluation of digital handheld products.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.11 no.2
• /
• pp.9-13
• /
• 2002

In the last decade, the replacement of old PFM restorations has been a common dental procedure, especially on the anterior regions. Gingiva conditions in most re-treatment cases are not healthy with the old restorations due to ill-fitting margin, improper tooth reduction and poor oral hygiene. Practitioners must carefully evaluate and manage periabutmental gingiva for final restorations. The role of provisional restoration became a major clinical concern at this point. Well-fabricated provisional restorations with precise-fit margin and proper anatomy are critical for achieving good gingival health. Thus, the key of success in replacing old PFM crown depends on the proper tissue management by precise provisional restorations.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.4
• /
• pp.73-80
• /
• 2016

Most fault prediction models have class imbalance problems because training data usually contains much more non-fault class modules than fault class ones. This imbalanced distribution makes it difficult for the models to learn the minor class module data. Data imbalance is much higher when severity-based fault prediction is used. This is because high severity fault modules is a smaller subset of the fault modules. In this paper, we propose severity-based models to solve these problems using the three sampling methods, Resample, SpreadSubSample and SMOTE. Empirical results show that Resample method has typical over-fit problems, and SpreadSubSample method cannot enhance the prediction performance of the models. Unlike two methods, SMOTE method shows good performance in terms of AUC and FNR values. Especially J48 decision tree model using SMOTE outperforms other prediction models.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1143-1149
• /
• 2014

The adsorption experiments of lithium ions were conducted in the fixed bed column packed with activated carbon modified with nitric acid. Effect of inlet concentration, bed hight and flow rate on the removal of lithium ions was investigated. The experimental results showed that the removal and the adsorption capacity of lithium ions increased with increasing inlet concentration, and decreased with increasing flow rate. When the bed height increased, the removal and the adsorption capacity increased. The breakthrough curves gave a good fit to Bohart-Adams model. Adsorption capacity and breakthrough time calculated from Bohart-Adams model, these results were remarkably consistent with the experimental values. The adsorption capacity was not changed in the case of 3 times repetitive use of adsorbent.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.3
• /
• pp.15-23
• /
• 2003

Chestnut trees have been used as a dyeing material, which are grow naturally, are cultivated all the area of Korea. So, there is abundant amount of the materials and they have better colorfastness than other natural dyeing materials. But chestnut husk extract is good at silk and wool fabrics, not cotton fabrics. That's why many methods using chestnut extraction for dyeing are being studied. But most of them depend on treatment method with chemical material which doesn't fit with the aim, using natural materials. Therefore in this research, we used protein pre-treatment method which is dyeing chestnut husk extract after treating at cotton fabrics with bean sap. And we studied the effect of dyeability of chestnut husk extract to cotton fabrics. As a result of pre-treatment of bean sap at cotton fabrics, dyeability was increased. Besides laundering fastness, dry cleaning fastness, perspiration fastness and light fastness were almost increased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.10
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.