• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.3
• /
• pp.22-34
• /
• 1996

Regarding the plate bending process by line heating method, in this study a simplified numerical analysis is performed for a beam model to predict its residual deformation and stress distribution. Using the modified strip theory and beam finite element method, a PC-based simulation program is developed for a thermo-elastic-plastic beam. The plate bending problem can be approximately replaced by a beam model using distributed springs to account for the effect of adjacent strips. The spring constants are chosen as the best fit with experiments. In this paper, it is assumed that the temperature distribution is already given and the temperature-dependent material properties are considered. To verify the simulation program, the results using present numerical algorithm are compared with other published experimental results and similar numerical studies. The comparison shows good agreement. The present PC-based computer program also shows good efficiency in computing time.

• Research in Mathematical Education
• /
• v.23 no.1
• /
• pp.23-45
• /
• 2020

Many researches proposed different models and concepts for the PCK. It is important to understand its composition. Most studies investigated the development of PCK and its influence on students' learning from the teachers' perspectives. We developed an instrument for assessing middle school students' perceptions of mathematics teachers' PCK (SPOMTPCK) to investigate the nature of PCK. Theoretical claims and empirical research in PCK were used to design questions and sub-scales for the SPOMTPCK. The face validity of the instrument was established by the expert mathematics teachers and students. A questionnaire consisting of 38 items on a five-point Likert-type scale was used for data collection from 799 middle school students. The exploratory factor analyses resulted in the development of a three-factor scale of 17 items that was proved valid and reliable, that is, pedagogical representation, understanding students and curriculum, and encouraging students' engagement. The Cronbach α coefficients of the scale was 0.935, and the Cronbach α coefficient of three factors were ranged from 0.721 to 0.912. The confirmatory factor analysis showed that the questionnaire has good construct validity and the fit indexes are good. MANOVA analysis of variance revealed that the differences in mathematics teachers' PCK identified by students of different school types and grades were statistically significant. It is a validate measurement to evaluate the perceived mathematics teachers' PCK for middle school students.

• Advances in Computational Design
• /
• v.8 no.2
• /
• pp.97-112
• /
• 2023

The Finite Element (FE) modeling of Reinforced Concrete (RC) under seismic loading has a sensitive impact in terms of getting good contribution compared to experimental results. Several idealized model types for simulating the nonlinear response have been developed based on the plasticity distribution alone the model. The Continuum Models are the most used category of modeling, to understand the seismic behavior of structural elements in terms of their components, cracking patterns, hysteretic response, and failure mechanisms. However, the material modeling, contact and nonlinear analysis strategy are highly complex due to the joint operation of concrete and steel. This paper presents a numerical simulation of a chosen RC column under monotonic and cyclic loading using the FE Abaqus, to assessthe hysteretic response and failure mechanisms in the RC columns, where the perfect bonding option is used for the contact between concrete and steel. While results of the numerical study under cyclic loading compared to experimental tests might be unsuccessful due to the lack of bond-slip modeling. The monotonic loading shows a good estimation of the envelope response and deformation components. In addition, this work further demonstrates the advantage and efficiency of the damage distributions since the obtained damage distributions fit the expected results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.886-897
• /
• 1999

Fitness of clothes becomes a major concern in apparel industry. But girls had difficulties to buy ready-made clothes of good fit. To solve this problem it is necessary to classify girls' lower body Into several kinds of somatotypes and to develop dress form. The purposes of this study was to classify lower body types of middle-high school an provide the dress forms based on the analysis of their lower body types. The subjects for anthropometric measurement were 402 middle-high school girls of 13 to 15 year-old. The result of factor analysis indicated that 5 factors were extracted from anthropometric measurments through factor analysis and those factors comprise 71% of total variance. 4 clusters were categorized using 5 factor scores by cluster analysis 4 lower body dress forms for middle-high school girls were made of gypsum mould. By the analysis of more photograph three dimensional characteristics of somatotype and overlapped cross-section diagrams were analyzed.

• Journal of Biosystems Engineering
• /
• v.12 no.2
• /
• pp.38-43
• /
• 1987

An experimental study was conducted to develop a thin-layer rewetting equation of short grain rough rice of Akihikari variety. Four thin-layer rewetting equations were experimentally determined from $25^{\circ}C$ to $45^{\circ}C$ and 70%RH to 85%RH conditions. Diffusion, Henderson, Page, and Thompson equations widely used as thin-layer drying equations were selected. Experimental data were fitted to these equations using linear regression analysis except diffusion equation. The diffusivity in the diffusion equation was determined by optimization method. Four equations were highly significant. In order to compare the goodness of fit of each equation, the error mean square of each equawas calculated. The diffusion model was not a very good model because the error mean square was very large. The other three models showed the same level or error mean square and could predict satisfactorily the rewetting rate or short grain rough rice.

• Journal of Information Technology Applications and Management
• /
• v.21 no.4_spc
• /
• pp.403-414
• /
• 2014

Forecasting technology in economic activity is a quite intricate procedure so researchers should grasp the point of the data to use. Diffusion models have been widely used for forecasting market demand and measuring the degree of technology diffusion. However, there is a question that a model, explaining a certain market with goodness of fit, always shows good performance with markets of different conditions. The primary aim of this paper is to explore diffusion models which are frequently used by researchers, and to help readers better understanding on those models. In this study, Logistic, Gompertz and Bass models are used for forecasting Global Wireline Subscribers and the performance of models is measured by Mean Absolute Percentage Error. Logistic model shows better MAPE than the other two. A possible extension of this study may verify which model reflects characteristics of industry better.

• The Korean Journal of Applied Statistics
• /
• v.26 no.5
• /
• pp.821-834
• /
• 2013

Law et al. (2004) proposed a normal distribution based salient mixture model for variable selection in clustering. However, this model has substantial problems such as the unidentifiability of components an the inaccurate selection of informative variables in the case of a small cluster size. We propose an alternative method to overcome problems and demonstrate a good performance through experiments on simulated data and real data.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.300-304
• /
• 2011

Phytases are hydrolytic enzymes that catalyze the sequential hydrolysis of phytic acid (myo-inositol-1,2,3,4,5,6-hexakisphosphate) to myo-inositols with lower numbers of phosphate groups. Two types of phytases have been identified which initiate hydrolysis of the phytic acid at either the 3- or 6- position of the inositol ring. In the present investigation, a mathematical model was proposed and computed to estimate maximum enzyme reaction rate constants which fit the experimental data obtained by other authors. Although the data points were scattered to some extent, good agreement was found between the model and the experiment data. It appears that the maximum rate constants of removal of the first, second, and third phosphate groups were not equal. Also there was neither a steady trend upward or downward in the rate constants with the stepwise hydrolysis reactions.

• Water for future
• /
• v.20 no.2
• /
• pp.107-116
• /
• 1987

The stochastic model has been developed for synthetic generation of hydrologic series that would be needed in the analysis, planning, design and operation of water resources system. In this study, after generating the yearly streamflows by multisite AR(1) model using the historical data in the Han River Basin, the monthly streamflows is generated by the disaggregation model. The model is verified of its applicability to domestic rivers, which is obtained through the statistical analysis and good ness of fit test using synthetic streamflows generated.

• Journal of the Korean Home Economics Association
• /
• v.41 no.5
• /
• pp.89-97
• /
• 2003

Fitness of clothes becomes a major concern in apparel industry. But high-school boys had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to classify boys' upper body into several kinds of somatotypes. The purpose of this study was to classify upper body types of high school boys based on the analysis of their upper body types. The subjects for anthropometric measurement were 99 high school boys of 16 to 18 year-old. The result of factor analysis indicated that 5 factors were extracted from anthropometric measurements through analysis and those factors comprise 68.44% of total variance. 3 clusters were categorized using 5 factor scores by cluster analysis. Type 1 was taller than other types and was bending somatotype. Type 2 was straight somatotype and had average size. Type 3 was characterized by short and small figure and had bending somatotype.