• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.143-179
• /
• 1989

To observe the bonding behavior of palladium-based alloys to porcelain; 1. Pd-Co binary alloy with the higher cobalt content, 2. Pd-Co binary alloy with the lower cobalt content, 3. Pd-Ag-Sn ternary alloy, 4. Pd-Ag binary alloy, 5. Pd-Cu-Au ternary alloy and 6. Pd-Cu binary alloy were made as 6 groups of experimental alloys. Each group of alloy was divided into 4 sub-groups such as one sub-group that was not degassed and three sub-groups that degassed for 5 minutes, 10 minutes and 15 minutes. On each specimen, weight changes after degassing, morphological changes of oxide layer by changing the degassing time, compositional changes at metal-ceramic interface and bond strength of metal-ceramic measured with planar shear test were observed and compared. The results of the present study allow the following conclusions to be drawn: 1. The alloy showing the greatest bond strength was Pd-Cu alloy without gold and bond strength was decreased by alloying gold to them. 2. Although Pd-Co alloy showed the most prominent oxidation behavior, bond strength of them to porcelain was not greatly high by the formation of porosities at metal-ceramic interfaces. 3. Likewise tin, cobalt formed the peaks on line profiles at metal-ceramic interface, however copper did not exhibit such peaks on line profiles. 4. Mainly, oxide layer on Pd-Co alloy was composed with cobalt, and for Pd-Co alloy with higher cobalt content the rise of bond strength was not significant by increased degassing time. 5. On Pd-Ag alloy not containing tin, during degassing for 15 minutes silver content was increased at metal-ceramic interface. 6. As an oxidized element, tin formed the oxide layers that widen their area by increasing the degassing time, while cobalt and copper showed the morphological changes of particle or crystal on oxide layer.

• Journal of Plant Biotechnology
• /
• v.37 no.1
• /
• pp.77-83
• /
• 2010

Eighteen cultivars of tomato were tested for their regeneration response. Lycopersicon esculentum cv. 2001-58 showed a very high frequency of regeneration (93%). We evaluated the effect of two compounds with known antioxidant activity (ascorbic acid and cystein). The use of ascorbic acid ($200\;-\;300\;{\mu}M/L$) has a positive effect on shoot regeneration. To develope a system for plastid transformation in tomato via homologous recombination, we constructed the tomato plastid expression vector (pKRT22-AG) harboring 2.2 kb flanking sequences cloned from intact plastid genome and gfp gene. To investigate the factors affecting the delivery system of the pKRT22-AG into chloroplast using bombardment, We assessed the optimal DNA concentration, gold particle volume and target distance. Expression of the GFP protein was observed within chloroplast on protoplast of cotyledon explant by confocal laser scanning microscopy, which indicates that the protocol developed in this study be useful for the production of plastid transgenic plants in tomato.

• Economic and Environmental Geology
• /
• v.44 no.3
• /
• pp.203-215
• /
• 2011

Geochemical and mineralogical properties of a contamited soil should be taken into account to decide a remediation strategy for a given contaminant because development and optimization of soil remedial technologies are based on geochemical and mineralogical separation techniques. The objective of this study was to investigate the geochemical and mineralogical characteristics of arsenic-contaminated soils. The arsenic-contaminated soil samples were obtained from Chonam gold mine, Gwangyang, Chonnam, Particle size analysis, sequential extraction, and mineralogical analyses were used to characterize geochemical and mineralogical characteristics of the As-contaminated soils. Particle size analyses of the As-contaminated soils showed the soils contained 17-36% sand, 25-54% silt, 9-28% clay and the soil texture were sandy loam, loam, and silt loam. The soil pH ranged from 4.5 to 6.6. The amount of arsenic concentrations from the sequential soil leaching is mainly associated with iron oxides (1 to 75%) and residuals (12 to 91%). Major minerals of sand and silt fractions in the soils were feldspar, kaolinite, mica, and quartz and minor mineral of which is an iron oxide. Major minerals of clay fraction were composed of illite, kaolinite, quartz, and vermiculite. And minor minerals are iron oxide and rutile. The geochemical and mineralogical analyses indicated the arsenic is adsorbed or coprecipitated with iron oxides or phyllosilicate minerals. The results may provide understanding of geochemical and mineralogical characteristics for the site remediation of arsenic-contaminated soils.

• Parasites, Hosts and Diseases
• /
• v.28 no.1
• /
• pp.11-24
• /
• 1990

In order to observe the antigenic localization in the tissues of the adult Clonorchis sinensis, immunogold labeling method was applied using serum immunoglobulins (IgG) of either worm·infected rabbits (group I) or antigen-immunized rabbits (group II) (by the body quid obtained from the adult worms). The electron micrographs of the sectioned worm tissue antigens, embedded in Lowicryl HM 20 medium and stained with protein A-gold complex (particle sixte: 12 nm), were compared between the group I and group II. The gold particles were observed in the interstitial matrix of the worm parenchyma, the epithelial lamellae of the cecum, and the cecal lumen both in group I and II. But the particles were in general more concentrated in group II. The gold particles were not observed on the basal lamina of the tegument or on vitelline glands in group I, while they were highly concentrated on those areas in group II. There were also differences in the antigenicity of interstitial matrix(reacted with group I IgG) and head part(reacted with group II IgG) of the sperm cells in the seminal receptacle. Conclusively, it is suggested that the substances comprising the basal lamina of the tegument or vitelline glands act as specific antigens reacting with antigen(body quid) immunized rabbit IgG. On the other hand, the substances in the cecal lumen and cecal epithelial lamellae are thought to be the specific antigen that react with the worm-infected rabbit IgG.

• Parasites, Hosts and Diseases
• /
• v.30 no.4
• /
• pp.309-322
• /
• 1992

In order to observe the antigenic localization in the tissues of Metngonimus yokogawai in growth stages, immunogoldlabeling method was applied to using serum of the cat which Infected with isolated metacercariae from Plecoglossus aztivelis. The sectioned worm tissues from each growth stages were embedded in Lowicryl HM 20 medium, stained with infected serum IgG and protein A gold complect (particle size: 12 nm) and observed by electron microscopy. In the worm tissues of all experimental groups, the geld particles were specifically concentrated on the tegumental synch- tium and cytoplasm of the tegumental cell as well as the secretory granules in the parenchymal tissue. In the 16th and 20th week grown worm tissues, the gold particles were specifically concentrated on the vesicles in the tegumental syncytium and cl·toplasm of the tegumental cell. The gold particles were specifically concentrated on the caecal epithelia of the 4th, 8th and 12th week growth groups but slightly concentrated on those of the 16th and 20th week.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.82-88
• /
• 2017

Transgenic lily plants have been obtained after particle bombardment, using PDS-1000/He system and scale explants of lilies, followed by PPT (D-L-phosphinothricin) selection. In this study, scales of the lily plants cv. 'red flame' were bombarded with a plasmid containing the bar gene as a selectable marker, and the AtSIZ gene as a gene of interest, showing salt tolerance and drought tolerance respectively, and both being driven by the CaMV 35S promoter. For optimization of a protocol, factors which optimized and showed a high transformation efficiency under following conditions, were considered: a bombardment pressure of 1100 psi, a target distance of 6 cm and $1.0{\mu}m$ of gold particle, and 24-h pre-culture and post-culture on MS medium containing 0.2 M sorbitol and 0.2 M mannitol as osmoticum agents. After bombardment, all the bombarded scales of lily were transferred to MS medium without selective agents, for a week. Subsequently, these bombarded scales were transferred to a selection MS medium containing 10 mg/l PPT, and incubated for a month for further selection, after which they were cultured for another 4-8 weeks with a 4-week subculture regime on the same selection medium. After transferring into hormone-free MS medium, the PPT-resistant scales with shoots were successfully rooted and regenerated into plantlets. PCR analysis revealed that the surviving putatively transformed plantlets indicated the presence of both the bar gene and the AtSIZ gene. In conclusion, when 100 scales of lily cv. Red flame are bombarded, this study produced approximately 17-18 transgenic plantlets with an optimized bombardment protocol. The protocol described here can contribute to the breeding program of lilies.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell structure nanoparticles were synthesised by sol-gel process, and the morphology and crystallinity of TiO$_2$ shell were investigated by TEM and UV-Vis. absorption spectrometer. Au/TiO$_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of TOAA (Titanium Oxide Acethylacetonate) in Au colloid ethanol solution with $H_2O$. The thickness of TiO$_2$ shell on the surface of Au particles was about 1 nm. To investigate the crystallinity of TiO$_2$ shell, UV light with 254 nm and radioactive lay of $^{60}$ CO were irradiated on the TiO$_2$ coated Au colloid ethanol solution. The surface plasmon phenomenon of Au nanoparticles appeared only when the radioactive lay was irradiated on the TiO$_2$ coated Au colloid ethanol solution. From these results, it was found that the TiO$_2$ shell was amorphous and the MUA (Mercaptoundecanoic Acid) layer on the Au particle for its dispersion didn't act as an obstacle to disturb the movement of electron onto the surface of Au particle.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.336-342
• /
• 2012

Inorganic materials were commonly used as container media in domestic plant factories. Objective of this research was to secure the information in soil physical and chemical properties of inorganic materials such as vermiculites and perlites. To achieve this, 12 gold and silver vermiculites from China, Zimbabwe, and South Africa and 5 perlites from China were collected based on the marketing grades (MG) in particle sizes and analyzed for determination of their characteristics. The percentage of particles larger than $710{\mu}m$, in China perlite MG 3~5 mm, China silver vermiculites MG > 8 mm and MG 3~8 mm were 99.9%, 99.8%, and 99.7%, respectively, which were much higher than 28.4% in China gold vermiculite MG 0.3~1.0 mm, 14.0% in perlite MG < 1.0 mm, and 12.6% of Zimbabwe silver vermiculite MG < 1.0 mm. The container capacities of perlite MG < 1.0 mm and South Africa silver vermiculite MG 0.25~1.0 mm were 72.0% and 71.1%, respectively. The air space in China silver vermiculite MG 3~8 mm was 49.3% which was higher than other materials tested. However, the China gold and silver vermiculites MG 0.3~1 mm had 3.5% and 2.4% in air space indicating that possible problems could occur in soil aeration when they are used for container media. The percentage of easily available and buffering water of China gold vermiculite MG 0.3~1 mm and perlite MG < 1.0 mm were the highest among test materials. The ranges of pH and electrical conductivity were 6.36 to 10.7 and 0.032 to $0.393dS{\cdot}m^{-1}$ in vermiculites and 7.78 to 8.62 and 0.030 to $0.041dS{\cdot}m^{-1}$ in perlite, respectively. The cation exchange capacity of China silver vermiculite MG 0.3~1 mm were $14.7cmol{\cdot}kg^{-1}$ that was 10 times as high as $0.34cmol{\cdot}kg^{-1}$ in perlite MG 1~2.5 mm. The vermiculites had the higher contents of exchangeable cations such as Ca, K, and Na, than those of perlites.

• Journal of Plant Biotechnology
• /
• v.6 no.1
• /
• pp.9-13
• /
• 2004

Transient uidA expression was used to optimize parameters required for biolistic transformation of suspension cells of Easter lily, Lilium longiflourm. Maximum uidA expression occurred following bombardment with gold particles as compared to tungsten. A 3hr pre-treatment of suspension cells with 0.125M osmoticum resulted in a 1.5X increase in uidA expression. A helium pressure of 1550 psi combined with a particle travelling distance of 6cm resulted in maximum uidA expression as compared to either 1100, 1200, or 1800 psi. Transient transformation resulted in up to 493 uidA expressing cells/Petri plate. For stable transformation suspension cells of Lilium longiflorum, were co-bombarded with plasmid DNA containing cucumber mosaic virus (CMV) replicase under the rice actin (Act1) promoter and either the bar or PAT genes under the cauliflower mosaic virus (CaMV 355) promoter. Ten regenerated plants contained the transgene as analyzed by PCR, and two of the ten plants were confirmed to contain the transgene by Southern hybridization. The two transgenic plants were independent transformants, one containing the bar gene and the other both the CMV replicase and bar genes. Plants were sprayed at the rosette stage and found to be resistant to 1000 mg/L of phosphinothricin (Trade name-Ignite) indicating expression of the bar gene throughout the leaves when bar was under control of the CaMV 35S promoter.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.214-218
• /
• 2000

A hepatitis B Surface Antigen(HBsAg)-screening kit using immunochromatographic assay(ICA) method was developed by e employing two kinds of antibodies. One is mouse monoclonal anti-HBs for tracer antibody and the other is goat p이yclonal a anti-HBs for capture antibody. This capture antibody was immobilized on the surface of nitroceliulose(NC) membrane and the t tracer antibody was conjugated with g미d particles. When serum sample was added to the sample well, the $\infty$njugates d deposited in a dry state on the surface of glass fiber filter were reconstituted and then combined with HBsAg in serum. In 5 5 min after adding, the assay result was visible through the window, that is, the complexes composed of HBsAg and the c conjugates appeared as maroon line on the lower part of the NC membrane. The detection limit of the ICA kit was 2 ng/ml w when being tested with the reference HBsAg.