• Economic and Environmental Geology
• /
• v.3 no.2
• /
• pp.55-73
• /
• 1970

The district investigated covers the central and southern portions of the Uiryong Quadrangle amounting to $40km^2$ in area and is bounded approximately by geographical coordinates of $128^{\circ}$ 28' $40^{{\prime}{\prime}}{\sim}128^{\circ}$ 24' 25"E in longitude and $35^{\circ}10{\prime}{\sim}35^{\circ}14^{\prime}06^{{\prime}{\prime}}N$ in latitude. The purpose of this investigation was to provide basic information in drawing up a comprehensive development plan of the copper ore deposits known to exist in the HamanKumbuk district with special emphasis given to the ascertainment of geological and paragenetic characteristics. The area consists chiefly of shale, sandy shale and chert, all belong to Kyongsang System of Cretaceous age. Intruded into these rocks are andesite, granodiorite, basic dikes, and acidic dikes. The mineralization which took place in the area, consists of mostly fissure-filling vein deposits, numbering several tens, with varying magnitudes. The fissures and shear zones created in rocks, such as chert and granodiorite, hosted the deposition of mineralizing vapors and/or hydrothermal solutions along their openings. The strike lengths of these veins vary from 50 to 600 meters in extension and 0.1 to 3 meters in width. Although the degree of fluctuation in width is great, it averages 0.3m. The stuctural patterns, which apparently affected the deposition of veins, are fissure patterns, trend NS to $N30^{\circ}W$, and steep-pitching tension fractures as well as normal fault pattern. Ore minerals associated with vein matters are primarily chalcopyrite and small amounts of scheelite, cobaltiferous arsenopyrite, and gold and silver intimately associated with sulphide minerals. Associated with these ore mineral are pyrite, pyrrhotite, magnetite, specularite and arsenopyrite. Gangue minerals noted are quartz, calcite, chlorite, tourmaline and hornblende. In terms of the compositions of associated minerals, the vein deposits in the district could be grouped under the following four categories: 1. Pyrrhoitite, Arsenopyrite, Gold and Silver Bearing Copper Vein (Type I) 2. Calcite-Scheelite-Copper Vein (Type II) 3. Magnetite-Pyrite-Copper Vein (Type III) 4. Tourmaline Copper Vein (Type IV) Of the four types, the first and the fourth are presently yielding relatively higher grades: of copper ores and concentrates. The estimated ore reserves total some 222,000 metric tons with the following breakdown in terms of metal contents: Name of Mines Au(g/t) Ag(g/t) Cu(%) Reserves(M/T) Kunbuk 15.92 78.69 6,074 60.498 Cheil Kunbuk - - 1.040 60,847 Haman - - 2.688 101,204 222,549 As rehabilitation of old workings and/or exploration of veins at depth proceed, additional estimation of ore reserves may become apparent and necessary. With regard to the problem of beneficiation and upgrading of low-grade ores in the district, it would be advisable to make decisions on location, treating capacity and mill flowsheet after sufficient amount of exploration is completed as suggested in the report.

• Economic and Environmental Geology
• /
• v.46 no.3
• /
• pp.257-266
• /
• 2013

The geology of Sinaola state consists of Precambrian metamorphic rocks(Sonobari Complex), two Paleozoic units(lower non-differentiated metamorphic rocks and upper Carboniferous sedimentary rocks), five Mesozoic units(metavolcanic, clastic, and calcareous rocks), Cenozoic volcanic rocks, and Quaternary clastic sediments and volcanic flows. The Sinaola state is potentially rich in metallic mineral resources with lower degree of non-metallic mineral resources. They are related to a variety of geological environments and are mainly physiographically located on the Sierra Madre Occidental. Mainly known mineral deposits are of gold and silver followed by zinc, lead, copper and some iron. The state also has deposits of molybdenum, tungsten and bismuth that have been occasionally exploited. There is a reference of nickel and cobalt mineralization, but these deposits have been exploited only at a small scale.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.709-719
• /
• 2012

Prospection was performed on the tin mineralized belt in Mwanza and Kongolo areas of Katanga, DR Congo. Most of deposits in Katanga areas are related to the granites which are located in Kibaran belt in NE and SW trends of mid Proterozoic. Metasedimentary rocks in the Kibaran belt are intruded by granites, and tin, niobium and tantalum deposits are especially developed along with tin-granite. Cassiterite, coltan and gold are developed in the pegmatite, quartz vein and greisen in related to the tin-granite in Mwanza and Katanga areas, and they are exploited by artisan in the smale scale. And we conducted the works with the alluviums and stream sediments in the case of no outcrops. With the results of analysis of samples, we will choose a few potential mineralized zones and con-tinue to prosepect precisely.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.193-205
• /
• 1989

Regional geology of Chungil mine is composed of Cretaceous biotite granite. Chungil ore deposits are fissure filled quartz veins which developed in Cretaceous biotite granites. Mineralogic and fluid inclusion studies were undertaken to illuminate the origin of the ore deposits. Data gathered from occurrences of ore deposits and mineral paragenesis reveals that there were two major mineralization stage. The first stage is sulfides-quartz stage. The constituents of ore minerals are chalcopyrite, sphalerite, pyrrhotite with minor amount of galena, native Au, Ag, pyrite. The second stage is gangue mineral stage. Gangue minerals are quartz, fluorite and calcite. Homogenization temperature of fluid inclusions in quartz of the first and the second stage ranges from $212^{\circ}C$ to $336^{\circ}C$ and from $154^{\circ}C$ to $355^{\circ}C$ respectively. Homogenization temperature in fluorite and calcite of the second stage ranges from $127^{\circ}C$ to $252^{\circ}C$ and from $129^{\circ}C$ to $158^{\circ}C$ but these data require positive pressure corrections. Fluid inclusions in quartz of the Bongmyeong mine, Jangja the first mine and the second mine show range of homogenization temperature from $178^{\circ}C$ to $330^{\circ}C$, from $185^{\circ}C$ to $354^{\circ}C$ and from $206^{\circ}C$ to 336 respectively. The comparison of the fluid inclusion data, mineralogical component and vein attitude of the three mines with that of Chungil mine indicates that the origin of the deposits above mentioned is elucidated to be formed under similar environment. The compositions of the sphalerite in the first stage range from 16.05 mol.% FeS to 20.36 mol.% FeS.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.363-381
• /
• 2020

The polymetallic Co, Ni, Cu, As, Au, and Ag deposits of Bou Azzer East are located in the western part of the Bou Azzer inlier in the Central Anti Atlas, Morocco. Six stages of emplacement of the mineralization have been identified. Precious metals (native gold and electrum) are present in all stages of this deposit except the early nickeliferous stage. From the Statistical analysis of the Co, As, Ni, Au, and Ag contents of a set of 501 samples, shows that the Pearson correlation coefficient between As-Co elements (0.966) is the highest followed by that of the Au-Ag couple (0.506). Principal component analysis (PCA) and hierarchical ascending classification (HAC) of the grades show, that Ni is associated with the pair (As-Co) and Cu is rather related to the pair (Au-Ag). The kriging maps show that the highest values of the Co, As and Ni appear in the contact of the serpentinite with other facies, as for those of Au and Ag, in addition to anomalous zones concordant with those of Co, Ni and As, they show anomalies at the extreme South and North of the study area. The development of the anomalous Au and Ag zones is mainly along the N40-50°E and N145°E directions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.499-504
• /
• 2000

Amelogenesis imperfecta is defined as a genetically determined effect affecting enamel formation and may be associated with other ectodermal or systemic disorders. It is entirely an ectodermal disturbance, since the mesodermal components of the teeth are basically normal. The presentation of diverse clinical manifestations in 1:14,000 to 1:16,000. Classification of the AI types considers mode of inheritance and clinical manifestations. The most widely accepted classification system recognize three major groups; i.e., hypoplastic(thin enamel), hypocalcified(primary mineralization defect), hypomaturation(defect in enamel maturation). The treatment is that at first, genetic counselling must be practiced, and in anterior teeth, composite resin veneer or jacket crown for esthetics, and in posterior teeth, stainlees steel crown or gold onlay.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.47-62
• /
• 2024

Abu Gurdi area is located in the South-eastern Desert of Egypt which considered as volcanic massive sulfide deposits (VMS). The present work aims at investigating the ore mineralogy of Abu Gurdi region in addition to the effectiveness of the hydrometallurgical route for processing these ores using alkaline leaching for the extraction of Zn, Cu, and Pb in the presence of hydrogen peroxide, has been investigated. The factors affecting the efficiency of the alkaline leaching of the used ore including the reagent composition, reagent concentration, leaching temperature, leaching time, and Solid /Liquid ratio, have been investigated. It was noted that the sulfide mineralization consists mainly of chalcopyrite, sphalerite, pyrite, galena and bornite. Gold is detected as rare, disseminated crystals within the gangue minerals. Under supergene conditions, secondary copper minerals (covellite, malachite, chrysocolla and atacamite) were formed. The maximum dissolution efficiencies of Cu, Zn, and Pb at the optimum leaching conditions i.e., 250 g/L NaCO₃ - NaHCO₃ alkali concentration, for 3 hr., at 250 ℃, and 1/5 Solid/liquid (S/L) ratio, were 99.48 %, 96.70 % and 99.11 %, respectively. An apparent activation energy for Zn, Cu and Pb dissolution were 21.599, 21.779 and 23.761 kJ.mol^-1, respectively, which were between those of a typical diffusion-controlled process and a chemical reaction-controlled process. Hence, the diffusion of the solid product layer contributed more than the chemical reaction to control the rate of the leaching process. High pure Cu(OH)₂, Pb(OH)₂, and ZnCl₂ were obtained from the finally obtained leach liquor at the optimum leaching conditions by precipitation at different pH. Finally, highly pure Au metal was separated from the mineralized massive sulfide via using adsorption method.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.321-328
• /
• 2003

The epithermal gold and base metal deposit of the Tanggeung district of West Java consists of four major veins(Celak, Cigodobras, Cilangkap and Pasirbedil) with NS to N10$^{\circ}$∼20$^{\circ}$E and N75$^{\circ}$W strikes. The veins occur within fractures cutting the crystal and lithic tuff of Jampang Formation(Oligo-Miocene) in and around the Mt. Subang of the western Java, Indonesia. The ore mineralization is characterized by the occurrence of pyrite, sphalerite, galena, chalcopyrite, and small amounts of bornite and Fe-oxides. Hydrothermal alteration, associated with the mineralization, was dominantly silicified and enveloped by the phyllitic(sericitic), argillic and propylitic alteration containing the disseminated pyrite. Gangue minerals consist of interstratified smectite-illite, chlorite, sericite, and minor kaolinite. The presence of vapor-rich fluid inclusions in quartz veins suggests that boiling occurred locally throughout ore deposition. Fluid inclusion studies suggest that the ore fluid evolved from initial high temperatures(〓34$0^{\circ}C$) to later lower temperatures(〓19$0^{\circ}C$). Salinities range from 0.0 to 8.3 wt percent NaCl equiv. The relatively high increase in salinity(up to 8.3 wt percent NaCl equiv) might be explained by a local boiling and by a participation of magmatic fluids, supported by the sulfur isotope results. Evidence of fluid boiling suggests that the pressure decreased from 200 bars to 120 bars. This corresponds to the depths of approximately 750 to 1,200 m in a hydrothermal system that changed from lithostatic to hydrostatic conditions. Using homogenization temperatures and paragenetic constraints, the calculated $\delta$$^{34}$ S values of $H_2S$ in ore fluid are -0.2 to 1.8 permil close to the 0 permil isotopic value of magmatic sulfur.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.2
• /
• pp.77-85
• /
• 2024

Recently, the world has been declaring global carbon neutrality to curb carbon emissions, a major factor in global warming. Therfore, high-tech and clean energy industries such as renewable energy, electric vehicles, batteries, and semiconductors are rapidly developing. The Korean government selected total 33 critical minerals on based of evaluating the supply risk and economic impact of raw minerals essential for national high-tech industries (semiconductors, secondary battery, etc). Among these critical minerals, Copper, Zinc and lead have been used as basic materials in human life from the past to the present and in addition, they are currently used as an essential material for mobile phones, electric vehicles, and batteries. So, I would like to introduce the Las Bambas copper mine within Apurimac porphyry copper metallogenic belt of Peru, which have the world's 2^nd (copper), 4^th (zinc) and 5^th (lead) largest reserves of these critical minerals. Las Bambas copper mine is the world's largest mine with copper reserves of more than 1 billion tons and is joint venture project mine invested by MMG (Minerals and Metals Group, 62.5%), Guoxin international investment company (22.5%) and CITIC metal company (15.0%). This mine mainly produces copper and also produces gold, silver and molybdenum as a by-product. The ore grade of this mine has 0.77% Cu, 0.06 g/t Au, 3.93 g/t Ag and 178 ppm Mo. Mineral resource and ore reserve of this mine have 10.5 million ton Cu (0.61% Cu) and 6.9 million ton Cu (0.73% Cu). So, this mine life is about more than 20 years. The copper mineralization of this mine occurs as skarn type and vein type related with lower limestone of Ferrobamba formation and Cenozoic monzonites.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.391-405
• /
• 2003

The Daebong gold-silver deposit consists of mesothermal massive quartz veins thar are filling the fractures along fault shear (NE, NW) Bones within banded or granitic gneiss of Precambrian Gyeonggi massif. Based on vein mineralogy, ore textures and paragenesis, ore mineralization of this deposits is composed of massive white quartz vein(stage I) which was formed in the same stage by multiple episodes of fracturing and healing, and transparent quartz vein(stage II) which is separated by a major faulting event. Stage I is divided into the 3 substages. Ore minerals of each substages are as follows: 1) early stage I=magnetite, pyrrhotite, arsenopyrite, pyrite, sphalerite, chalcopyrite, 2) middle stage I=pyrrhotite, arsenopyrite, pyrite, marcasite, sphalerite, chalcopyrite, galena, electrum and 3) late stage I=pyrite, sphalerite, chalcopyrite, galena, electrum, argentite, respectively. Ore minerals of the stage II are composed of pyrite, sphalerite, chalcopyrite, galena and electrum. Systematic studies (petrography and microthermometry) of fluid inclusions in stage I and II quartz veins show fluids from contrasting physical-chemical conditions: 1) $H_2O-CO_2-CH_4-NaCl{\pm}N-2$ fluid(early stage I=homogenization temperature: 203∼3$88^{\circ}C$, pressure: 1082∼2092 bar, salinity: 0.6∼13.4 wt.%, middle stage I=homogenization temperature: 215∼28$0^{\circ}C$, salinity: 0.2∼2.8 wt.%) related to the stage I sulfide deposition, 2) $H_2O-NaCl{\pm}CO_2$ fluid (late stage I=homogenization temperature: 205∼2$88^{\circ}C$, pressure: 670 bar, salinity: 4.5∼6.7 wt.%, stage II=homogenization temperature: 201-3$58^{\circ}C$, salinity: 0.4-4.2 wt.%) related to the late stage I and II sulfide deposition. $H_2O-CO_2-CH_4-NaCl{\pm}N_2$ fluid of early stage I is evolved to $H_2O-NaCl{\pm}CO_2$ fluid represented by the $CO_2$ unmixing due to decrease in fluid pressure and is diluted and cooled by the mixing of deep circulated meteoric waters ($H_2O$-NaCl fluid) possibly related to uplift and unloading of the mineralizing suites. $H_2O-NaCl{\pm}CO_2$ fluid of stage II was hotter than that of late stage I and occurred partly unmixing, mainly dilution and cooling for sulfide deposition. Calculated sulfur isotope compositions ({\gamma}^{34}S_{H2S}$) of hydrothermal fluids (3.5∼7.9%o) indicate that ore sulfur was derived from mainly an igneous source and partly sulfur of host rock. Measured and calculated oxygen and hydrogen isotope compositions ({\gamma}^{18}O_{H_2O}$, {\gamma}$D) of ore fluids (stage I: 1.1∼9.0$\textperthousand$, -92∼-86{\textperthansand}$, stage II: 0.3{\textperthansand}$, -93{\textperthansand}$) and ribbon-banded structure (graphitic lamination) indicate that mesothermal auriferous fluids of Daebong deposit were two different origin and their evolution. 1) Fluids of this deposit were likely mixtures of $H_2O$-rich, isotopically less evolved meteoric water and magmatic fluids and 2) were likely mixtures of $H_2O$-rich. isotopically heavier $\delta$D meteoric water and magmaticmetamorphic fluids.