• Information and Communications Magazine
• /
• v.14 no.11
• /
• pp.22-28
• /
• 1997

ETSI SMG plays a key role at the development of standards for the UMTS Universal Mobile Telecommunications System, a set of standards aimed at the global market. It will be a real Third Generation Global System for Mobile CommunlcaUons adding new features and Introducing relevant technological InnovaUons while evolving from both GSM and ISDN networks. UMTS Is based on the carefully selected market requirements and belongs to the IMT-2000 family. UMTS standardlsaUon Is a market driven process being developed In a close co-operatlon with the UMTS Forum and GSM MoU.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.46-57
• /
• 2000

Ongoing standardization effort on 3G cellular system in 3GPP (UNTS) is based on GPRS core network and promises a global standard for systems capable of offering ubiquitous access to internet for mobile users. Considered radio access systems(FDD CDMA, TDD CDMA, and EDGE) are optimized for robust mobile use. However, there are alternative relatively high-rate radio interfaces being standardized for WLAN (IEEE802.11 and HIPER-LAN/2) which are capable of delivering significantly higher data rates to static or semi-static terminals with much less overhead. Also WPANs(BLUETOOTH, IEEE802.15), which will be present in virtually every mobile handset in the near future, are offering low cast and considerable access data rate and thus are very attractive for interworking scenarios. The prospect of using these interfaces as alternative RANs inthe modular UMTS architecture is very promising. Additionally, the recent inclusion of M-IP in the UMTS R99 standard opens the way for IP-level interfacing to the core network. This article offers an overview into WLAN-Cellular interworking. A brief overview of GPRS, UMTS cellular architectures and relevant WLAN standards is given. Possible interworking architectures are presented.

• Journal of Advanced Navigation Technology
• /
• v.8 no.2
• /
• pp.155-162
• /
• 2004

Recently, significant interest is shown to creation rather inexpensive global systems communications on base of Low-Earth-Orbit Satellite Networks (LEOSN). One of problems of design and creation LEOSN is development of the stream control methods and estimation it's efficiency in such networks. The given problem is complicated, that the topology of the satellite networks varies in time. It essentially hinders the analytical decision of the given problem. An effective way of overcoming of these difficulties is simulation modeling. For realization of research experiments on learning the information streams routing algorithms in LEOSN a special program complex SANET was developed. In the given paper principles of development of LEOSN simulation models and architecture of the manager by the process of a simulation modeling of the unit are considered. Methods of promotion of modeling time and architecture of a simulator complex offered in the article allow to boost essentially efficiency of simulation analysis and to ensure simulation modeling of the satellite networks consisting of several hundreds space vehicles.

• Journal of Ecology and Environment
• /
• v.47 no.4
• /
• pp.228-240
• /
• 2023

Growing complexity in ecosystem structure and functions, under impacts of climate and land-use changes, requires interdisciplinary understandings of processes and the whole-system, and accurate estimates of the changing functions. In the last three decades, observation networks for biodiversity, ecosystems, and ecosystem functions under climate change, have been developed by interested scientists, research institutions and universities. In this paper we will review (1) the development and on-going activities of those observation networks, (2) some outcomes from forest carbon cycle studies at our super-site "Takayama site" in Japan, and (3) a few ideas how we connect in-situ and satellite observations as well as fill observation gaps in the Asia-Oceania region. There have been many intensive research and networking efforts to promote investigations for ecosystem change and functions (e.g., Long-Term Ecological Research Network), measurements of greenhouse gas, heat, and water fluxes (flux network), and biodiversity from genetic to ecosystem level (Biodiversity Observation Network). Combining those in-situ field research data with modeling analysis and satellite remote sensing allows the research communities to up-scale spatially from local to global, and temporally from the past to future. These observation networks oftern use different methodologies and target different scientific disciplines. However growing needs for comprehensive observations to understand the response of biodiversity and ecosystem functions to climate and societal changes at local, national, regional, and global scales are providing opportunities and expectations to network these networks. Among the challenges to produce and share integrated knowledge on climate, ecosystem functions and biodiversity, filling scale-gaps in space and time among the phenomena is crucial. To showcase such efforts, interdisciplinary research at 'Takayama super-site' was reviewed by focusing on studies on forest carbon cycle and phenology. A key approach to respond to multidisciplinary questions is to integrate in-situ field research, ecosystem modeling, and satellite remote sensing by developing cross-scale methodologies at long-term observation field sites called "super-sites". The research approach at 'Takayama site' in Japan showcases this response to the needs of multidisciplinary questions and further development of terrestrial ecosystem research to address environmental change issues from local to national, regional and global scales.

• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.137-144
• /
• 2023

The relevance of the research topic lies in the necessity to use social networks as innovative tools of marketing communications. A wide audience and the ability to segment the market for a specific consumer determine the construction of a corporate strategy, which will be based on using the social networking approach. The spread of the global coronavirus pandemic has led to the rapid development of remote communication channels between the company and the customer. The issue of using marketing tools in social networks acquires the most urgent importance in the modern world of the introduction and implementation of the company's marketing strategies. The purpose of the academic paper is to study the use of social networks as features of implementing the marketing campaign. Social networks are the result of the development of digital technologies and the processes of creating an information society involved in the digital space. The objectives of the research are to analyse the opportunity of using social networks as a tool for marketing communications and their implementation at the level of its widespread use by enterprises and establishments. It is significant to create an advertising campaign by defining the target audience and outlining the key aspects, on which the company is focused. The research methodology consists in determining the theoretical and methodological approaches to the essence of introducing social networks and their practical importance in the implementation of marketing activities of companies. The obtained results can significantly improve the quality of functioning of modern enterprises and organizations that plan to master a new market segment or gain competitive advantages in the existing one. The academic paper examines the essence of social networks as a tool of marketing communications. The key principles of the development of digital social platforms were revealed. The quality of implementing the advertising campaign in the social network was studied, and further prospects for the development of using social networks as a component of the marketing strategy were outlined. Therefore, the academic paper analyses the problems of using social networks as a marketing tool.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.809-816
• /
• 2005

MANET(mobile ad hoc network) cn be one of the access networks of BcN(broadband convergence network), and an user node requires address auto-configuration protocol for mu14i-hop environment. Some address auto-configuration protocols are proposed for independent MANET, but they don't consider BcN-accessable MANET environment. In this paper, new address auto-configuration protocol for wireless nodes is proposed. With this proposal, they ran configure their global addresses automatically in hybrid MANETs as BcN access networks. The autoconfiguration protocol modifies IPv6 NDP(neighbor discovery protocol) messages to deliver global prefix information to all wireless nodes, and avoids message boradcasting to minimize network overhead.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.99-111
• /
• 2004

Two general security measures in computing networks are secure data transmission and user authentication, These problems are still critical in the wireless LAN environments. Thus security becomes most significant issue in personal network environments and ubiquitous networks based on wireless LANs. We purpose a new authentication system for these kind of environments, and coined it UPMA(Ubiquitous Personal Mutual Authen-tication) model. UPMA supports authenticating configurations which provides personal verification for each system. It guarantees secure communications through the session key setup, and provides mutual authentication by verifying each user and his/her station. UPMA solves security problems in ubiquitous networks without accessing authentication server, Instead it performs mutual authentication between terminals or between systems. It is a global authentication system which enables global roaming service through the Internet or other public networks, It can be used to guarantee safe and convenient access to a company Intranet or to a home network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1619-1624
• /
• 2008

Recently, In order to provide ubiquitous service, we develop each middleware and interface for sensors networks, RFID(Radio Frequency IDentification) and GPS(Global Positioning System). We use GPS for the location-based services, RFID for identifying the distribution logistics services, sensor networks for collecting the context data such as temperature, humidity, barometric pressure. Recently, there is increasing the need of integrated interface for using these sensor elements complexly in agriculture and livestock, construction, medical applications and, etc. This paper developments a integrated common interface for supporting efficiently process of sensing data using RFID, GPS and sensor network. This interface have the filtering function, parsing function, queuing function, interface management function, access function and, etc. We present the integrated frame structure combined with the collected context data in GPS, RFID and sensor networks and, support the open interface for providing complex ubiquitous application systems. Therefore, this interface will be efficiently used the system using RFID, GPS and sensor network, and supported many ubiquitous application services.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.427-439
• /
• 2019

This study investigated the semantic network based on the focus of the fashion image and SNS text utilized by global SPA brands on the last seven years in terms of the quantity and quality of data generated by the fast-changing fashion trends and fashion content-based media environment. The research method relocated frequency, density and repetitive key words as well as visualized algorithms using the UCINET 6.347 program and the overall classification of the text related to fashion images on social networks used by global SPA brands. The conclusions of the study are as follows. A common aspect of global SPA brands is that by looking at the basis of text extraction on SNS, exposure through image of products is considered important for sales. The following is a discriminatory aspect of global SPA brands. First, ZARA consistently exposes marketing using a variety of professions and nationalities to SNS. Second, UNIQLO's correlation exposes its collaboration promotion to SNS while steadily exposing basic items. Third, in the case of H&M, some discriminatory results were found with other brands in connectivity with each cluster category that showed remarkably independent results.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.240-253
• /
• 2017

Latin hypercube sampling is widely used design-of-experiment technique to select design points for simulation which are then used to construct a surrogate model. The exploration/exploitation properties of surrogate models depend on the size and distribution of design points in the chosen design space. The present study aimed at evaluating the performance characteristics of various surrogate models depending on the Latin hypercube sampling (LHS) procedure (sample size and spatial distribution) for a diverse set of optimization problems. The analysis was carried out for two types of problems: (1) thermal-fluid design problems (optimizations of convergent-divergent micromixer coupled with pulsatile flow and boot-shaped ribs), and (2) analytical test functions (six-hump camel back, Branin-Hoo, Hartman 3, and Hartman 6 functions). The three surrogate models, namely, response surface approximation, Kriging, and radial basis neural networks were tested. The important findings are illustrated using Box-plots. The surrogate models were analyzed in terms of global exploration (accuracy over the domain space) and local exploitation (ease of finding the global optimum point). Radial basis neural networks showed the best overall performance in global exploration characteristics as well as tendency to find the approximate optimal solution for the majority of tested problems. To build a surrogate model, it is recommended to use an initial sample size equal to 15 times the number of design variables. The study will provide useful guidelines on the effect of initial sample size and distribution on surrogate construction and subsequent optimization using LHS sampling plan.