• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.572-583
• /
• 2012

In this study, we investigated visual fatigue in i3D system and basic factors that contribute to visual fatigue in the system. i3D is a type of glasses-free display which supports elementary manual interaction of users with the display. In Experiment 1, we performed open-ended survey of visual fatigue and collected responses from observers which then were used as survey questions for visual fatigue. The questions were validated by factor analysis from which we derived fatigue measurement scale. In Experiment 2, we measured visual fatigue in various conditions using survey questions obtained from Experiment 1. Using manual interaction (present/absent), viewing distance(1/2/4m), and viewing orientation($0/28/56^{\circ}$) as three factors in within-subject design, we measured visual fatigue in each condition. The results indicated that visual fatigue deceases with farther viewing distance, but viewing orientation and manual interaction does not influence visual fatigue. Although fatigue unexpectedly decreased in an extreme viewing condition (e.g., distance 1m, orientation $56^{\circ}$), the results were obtained because of technical limitation of glasses-free 3D display. General discussion provides discussion on limits of the current study and suggestions for future research.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.71-76
• /
• 2009

The clean non-contact type conveyor system for vertical transfer of large size FPD(Flat Panel Display) glasses has been installed at FPD production line just since a few years ago. The most important part of the conveyor is the 3 axis permanent magnet rollers faced orthogonally in pairs. However, the systematic design method about it has not been proposed yet. In this paper, we studied a design analysis for determining geometrical parameters of the magnetic roller by using a commercial FEM tool of the 3D Maxwell. Through a series of simulation, we obtained the relationship of several geometrical parameters affecting the torque of the conveyor.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2012

Purpose: One of the critical aspects on dispensing glasses is to match the center of pupils to the optical center of lenses as the mismatched glasses are able to induce uncomfortable effects called prism which has been known to induce phoria, a main cause for asthenopia in many cases. Therefore, we investigated the induced prism occurred by mismatching centers between the center of pupils and the optical center of lenses. Methods: In this study, total 103 subjects were examined whether the center of pupils and the optical center of lenses are matched in horizontal and vertical directions, and then, the data was categorized into 4 groups based on the structural components of glasses. Total amount of prism was compared to show the effect of the glasses frame on the prism induction, and the value of measured prism was compared with the German RAL-RG 915 regulations. Results: The results in respect to the horizontal component showed that the induced prism was not found in 10.7% of total subjects. 73.8% of total subjects were influenced by induced prism, the range of prism was in a tolerance level. However, the 15.5% of total subjects seemed to be influenced by prism which is out of the criterion of tolerance. In case of vertical component, 23.3% of total subjects showed no effects of prism while early adopting glasses, 54.4% of total subjects showed a little prism effect within the criterion of tolerance, and 22.3% of total subjects showed the prism effect out of the tolerance range. This data indicates that group A and B that are less likely adjustable by fitting induce more prism than group C and D in horizontal and vertical components. Conclusions: In higher refractive error condition, it was found that aligning the optical center of lenses with the center of pupils by pre-fitting of glasses frame minimized prism induction in horizontal and vertical components, which ameliorates ocular fatigue. Therefore, appropriate optometric dispensing through fitting by opticians and precise design about monocular PD and monocular Oh are necessary to improve visual perception.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.275-281
• /
• 2009

Porous materials were manufactured by hydrothermal treatment of waste bottle glass without foam agent. Factorial design was applied to analyze data by statistical methods and deal with the important factors for a process. The largest effect for porosity was for temperature of hydrothermal treatment. Amount of water and temperature-water interaction appeared to have little effect. The particle size of raw material was also identified as a major factor by one-way ANOVA and the porosity decreased as the size increased. The sintering temperature was not statistically significant for the porosity but was significant for the pore size. The porous material had compressive strength and thermal conductivity comparing with those of ALC (autoclaved lightweight concrete), although it has higher porosity than for ALC.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.1
• /
• pp.30-36
• /
• 2003

Brittle materials such as glasses and ceramics, which are very weak under impact loading, show fragile failure mode due to their low fracture toughness and crack sensitivity. When brittle materials are subjected to impact by small spheres, high contact pressure occurs at the impacted surface causing local damage on the specimen. This damage is a dangerous factor in causing the final fracture of structures. In this research, the crack propagation process of soda-lime glass by the impact of small spheres is explained and the effects of several constraint conditions for impact damage were studied by using soda-lime glass; that is, the effects for the materials and sizes of impact ball, thickness of specimen and residual strength were evaluated. Especially, this research has focused on the damage behavior of ring cracks, cone cracks and several other kinds of cracks.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.125-131
• /
• 2017

We propose a new graphical method for selecting a pair of optical and housing materials to simultaneously athermalize and achromatize an LWIR optical system. To have a much better opportunity to select the IR glasses and housing materials, an athermal glass map is expanded by introducing the DOE with negative chromatic power. Additionally, from the depth of focus in an LWIR optical system, the tolerable housing boundary is provided to realize an athermal and achromatic system even for not readily available housing material. Thus, we can effectively determine a pair of optical and housing materials by reducing the thermal shift to be less than the depth of focus. By applying this method to design a night vision camera lens, the chromatic and thermal defocuses are reduced to less than the depth of focus, over the specified waveband and temperature ranges.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.105-108
• /
• 2017

Condensation is one of the common issues which we can easily see in everyday life. For example, the surface of glasses with cold water is easily moisturized. This wet surface gives us uncomfortable feeling and is sometimes dangerous because it is slippery. As the safety on working space is one of the most important issue on offshore project, condensation is also important matter to take care of with precaution. Since the bottom of vessel or offshore facility is submersed in the water, the risk of having condensate on the steel surface is getting higher because sea water temperature is normally lower than ambient temperature. And if there is any electric equipment or person working in that space, condensation is normally not allowed. The pontoon of semi-submersible drilling rig is such a space which is submersed, with electric and mechanical equipments and person working periodically. To prevent condensation in pontoon, study was conducted by checking several cases.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.100.2-100.2
• /
• 2014

The DOTIFS is a new multi-object Integral Field Spectrograph (IFS) planned to be designed and built by the Inter-University Center for Astronomy and Astrophysics, Pune, India, (IUCAA) for cassegrain side port of the 3.6m Devasthal Optical Telescope (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences, Nainital. (ARIES) It is a multi-integral field unit (IFU) spectrograph which has 370-740nm wavelength coverage with spectral resolution R~1200-2400. Sixteen IFUs with microlens arrays and fibers can be deployed on 8 arcmin field. Each IFU has $8.7^{{\prime}{\prime}}{\times}7.4^{{\prime}{\prime}}$ field of view with 144 spaxel elements. 2304 fibers coming from IFUs are dispersed by eight identical spectrographs with all refractive and all spherical optics. In this work, we show optical design of the DOTIFS spectrograph. Expected performance and result of tolerance and thermal analysis are also shown. The optics is comprised of f=520mm collimator, broadband filter, dispersion element and f=195mm camera. Pupil size is determined as 130mm from spectral resolution and budget requirements. To maintain good transmission down to 370nm, calcium fluoride elements and high transmission optical glasses have been used. Volume Phase Holographic grating is selected as a dispersion element to maximize the grating efficiency and to minimize the size of the optics. Detailed optics design report had been documented. The design was finalized through optical design review and now ready for order optics.

• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.229-235
• /
• 2000

Although Frank Lloyd Wright represents himself as one of the greatest American master architect, the master architects contribution towards the advancement in the modern history of architecture goes beyond just creating landmark buildings. Through out his life, he was the leading architect not only in the area or architectural design but showed his talent in interior architecture, furniture, fabric, lighting fixture, art glasses, tablewares, silver wares as well as in graphic design which should cover all the elements related to the "total design" in architecture. As seen in his architectural design, the "total design" concept also reflects both beauty and logic of the nature and strengthens his theory of the organic architecture design. The research began with finding out the relationship between his architecture, nature and the supporting design elements mentioned above. the purpose of the research is to analyze the relationship of the spatial organization and the design elements in Frank Lloyd Wrights architectural works from the point of "total design" view and provide the valuable guide line for the development of the modern interior design. His design theory, based on the fundamental ideas of the nature, his organic architecture design, and reference materials to support total design concept will be discussed on chapter 2. And on chapter 3, application of the total design in his actual project will be analyzed. The data and analyzation have been completed based on written references and actual visit to the project sites. Frank Lloyd Wright placed highest value on the human beings and enjoyed presenting new ideas and forms to create better environment for the humans through his architecture and interior design projects. While he was presenting new ideas he continued to support design for democracy which has close relationship to the new frontier spirit of America. He was the master architect for the general society with accurate understanding of the life style of the public with design sensitivity shown in his concept of the total design.s concept of the total design.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.85-92
• /
• 2023

A safety helmet is considered the last gear to protect workers from harmful and dangerous events occurring on industrial sites. Recently, interest in the importance of personal protective equipment design reflecting individual characteristics has been emphasized to improve usability and convenience. However, it has been found that if it is inconvenient to wear or has poor work efficiency, it will not be used well or will be used incorrectly. In this study, an investigation was performed with 35 questions, direct observation, and intensive interviews of construction workers to determine the inconvenience and problems of wearing safety helmets. Moreover, managers of 9 construction sites in 6 cities were asked about the performance and design of safety helmets. As a positive answer, it was found that the brim (awning) of the safety helmet was shortened to give the safety glasses a light-shielding function. In addition, an upward adjustment all-in-one type safety helmet was requested. On the other hand, it was revealed that negative answers felt uncomfortable due to the brim (awning) on the front of the helmet. Based on the survey results, a new helmet model suitable for construction site activities was presented, and wearability improvement determinants were discovered through performance and design improvement.