• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1526-1531
• /
• 2007

Data transmission capacity that is required in 2010 is forecasted that increase by optical communication capacity more than present centuple, and is doing increased demand of optical communication related industry product present. Specially, Lid glass' application that is one of optical communication parts is used in optical communication parts manufacture of Fiber array, Ferrule array, Fanout Black, Silica optical waveguide chip and splitter etc. Also, it is used widely for communication network system, CATV, ATM-PON, FTTH and system. But, Lid glass need much processing times and becomes cause in rising prices of optical communication parts because production cost is expensive. The objectives, of this work is to suggest the micro concave and convex pattern manufacturing technology on borosilicate plate using high temperature and compression molding method. As a result, could developed micro pattern Mold more than 5 pattern, and reduce Lid Glass manufacture cycle time.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.230-234
• /
• 2001

Traditional doenjang was fermented in different vessels, and its quality characteristics were investigated during ripening. Fermentation vessels used were dark brown glaze pot, dark brown glaze pot with glass lid and plastic box. Water content of doenjang decreased during fermentation, with doenjang pepared in dark brown glaze pot with glass lid showed the highest water content reduction. Water-soluble nitrogen content $(4.56{\sim}5.80%)$ was the highest at 8 months fermentation and amino type nitrogen content continuously increased until 12 months, with doenjang in dark brown glaze pot higher than those in plastic box. Sensory evaluation revealed the quality of doenjang fermented in plastic box was significantly lower than others after 4 months.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1034-1037
• /
• 2006

We have developed a novel thin film encapsulation method for thin-cathode OLED by introducing organic (not polymer)/inorganic multiple thin films to protect device, which is shown to slow down the permeation rate of moisture and oxygen. From the stability test of devices, the projected lifetime of thin-cathode OLED device with thin film encapsulation was similarly to that with glass lid encapsulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.48-52
• /
• 1995

Chipping is an unavidable phenomean in the slot grinding process of hard and brittle materials. However,it should be reduced for the improvement of surface integrity in the manufacture of optical and semiconductor components. Electrolytic In-process Dressing (ELID) technique for metal bonded superabrasive grinding wheel has been developed for mirror surface grinding of hard and brittle materials. Electrically dressed wheel surface has sharply exposed abrasives and results in lower grinding force, higher grinding efficiency in grinding. The paper deals with a newly developed method for slot grinding using ELID and was implemented to improve grooved surface quality and decreases chipping size on the edge of the groove. As a result, we accomplished shipping-free grooves and obtained the clear ground sufaces on glass and tungsten carbide.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.105.2-105.2
• /
• 2011

화비정질 실리콘의 빛에 의한 노화현상 (light-induced degradation; LID)은 이미 1977년 보고된 Staebler-Wronski 효과에 의해서 확인된 바 있다. 이는 비정질 실리콘이 빛에 노출될 때, 이미 포함되어 있는 수소원자가 빛 에너지에 의해서 이동하게 되고, 이로 인해서 생성 또는 소멸되는 댕글링 본드 때문에 일어난다. 특히, 일상적인 태양광의 노출 하에서 태양전지의 장시간 성능을 예측하는데 물리적인 이해의 부족 및 기술 환경적인 어려움이 있고, 이러한 요인들은 안정된 태양전지를 개발하는데 장해요인으로 나타난다. 그러므로 비정질 실리콘 태양전지가 장시간 태양광에 노출되어 시간이 지남에 따라서 "성능이 어떻게 변하는지?" 그리고 "이에 대한 원인은 무엇인지?" 등은 여전히 과학적으로 풀어야할 숙제로 남아있다. 본 논문에서는 비정질 실리콘으로 구성된 태양전지가 태양광에 노출될 때 시간이 지남에 따라서 (1) 성능이 어떻게 변하는지, (2) LID의 변화는 언제 안정화되는지, 그리고 (3) 성능변화에 대한 원인은 무엇인지에 대해서 논의한다. 본 논문은 장시간 빛에 노출되는 비정질 실리콘 태양전지의 성능예측에 관해서 연구하였다. 결함밀도의 운동학적 모형을 통해서 태양광 노출에 대한 태양전지 성능변화를 예측하는데 초점을 맞추었고, 이를 위해서 태양전지에 조사되는 태양광 세기, 주변온도, 등이 고려되었다. 특히, 전하운반자의 수명이 결함밀도에 의해서 결정되기 때문에 비정질 실리콘 태양전지의 빛에 대한 노화현상 (LID)이 확장지수함수 (stretched-exponential) 완화법칙을 따르는 결함밀도에 의해서 물리적으로 설명된다. 한편 이와 같은 물리적 계산의 유용성을 확인하기 위해서 동일한 태양전지에 대해서 AMPS-1D 컴퓨터 프로그램을 사용하였고, 이를 통해서 비정질 실리콘 태양전지의 빛에 대한 노화현상을 물리적 및 정량적으로 이해하였다. 본 연구에 적용되는 태양전지는 비정질 실리콘으로 구성된 pin 구조 (glass/$SnO_2$/a-SiC:H:B/a-Si:H/a-Si:H:P/ITO)로서 다음과 같은 특성을 갖는다: 에너지 띠간격~1.72 eV, 두께~400 nm, 내부전위~1.05 V, 초기 fill factor~0.71, 초기 단락전류~16.4 mA/$cm^2$, 초기 개방전압 0.90 V, 초기 변환효율 10.6 %. 우리는 이와 같은 연구를 통해서 과학적으로 비정질 실리콘의 빛에 의한 노화현상을 이해하고, 기술적으로 효율 및 경제성이 높은 태양전지의 개발에 도전한다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.57-57
• /
• 2000

Brazing characteristics of the LTCC(Low Temperature Co-fired Ceramics)/ Kovar(Fe-Ni-Co alloy) was investigated. Kovar is one of the typical material for the lid of MCM and packages. In case of alumina package, Brazing process is done by higher temperature profile than 800 $^{\circ}C$ and Ag-Cu alloy. But, LTCC has sintering temperature near 850 $^{\circ}C$. So, it is difficult to use the same process as alumina brazing. The adhesion strength of the brazed part is affected by brazing alloy and metallization properties between conductor pattern and LTCC material. We investigated brazing characteristics of the LTCC/Kovar using various brazing alloys(Ag-Cu, Au-Sn) and process conditions. And, we examined the influence of the glass contents in conductor on the brazing characteristics of the LTCC/Kovar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.687-694
• /
• 2002

An in vitro study was conducted to examine the effect of addition level of concentrate on fermentation characteristics and long-chain unsaturated fatty acids composition, especially conjugated linoleic acid (CLA) and trans-octadecenoic acid (t-FA) by mixed ruminal bacteria when incubated with linseed or rapeseed. Four levels (0.83, 1.25, 1.67 and 2.08%, w/v) of concentrate and ground oilseeds (linseed or rapeseed; 0.83%, w/v) were added to mixed solution of strained rumen fluid with artificial saliva (1:1, v/v) in the glass jar with a glass lid equipped with stirrer, and was incubated anaerobically for 24 h at $39^{\circ}C$. Addition level of concentrate slightly reflect on pH and ammonia concentration of the culture solution at the various incubation times when incubated with both linseed and rapeseed. Total VFA concentration slightly increased with incubation times and concentrate levels for incubations with oilseeds. While CLA composition had a clearly increasing trend with incubation time when incubated with linseed, percent CLA was relatively stable when incubated with rapeseed. Percent CLA, however, had a clearly decreasing trend with concentrate level throughout incubation times with significances at 3 h incubations when incubated with linseed (p<0.038) and rapeseed (p<0.0009). The differences in compositions of t-FA were relatively small among concentrate levels for both incubations with linseed and rapeseed. The ratios of t-FA to CLA were lower for linseed with increased proportion of CLA than for rapeseed.

• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.251-261
• /
• 2010

This article demonstrated the application of the Fuzzy Data Envelopment Analytical Hierarchy Process (FDEAHP) to evaluate the root causes of critical defect problems occurring in the production of liquid medicine. The methodology of the research began by collecting the defect data by using Check Sheets, and ranking the significant problems by using a Pareto Diagram. Two types of major problems were found to occur, including glass fragments in the medicine and damaged lid threads. The causes of each problem were then analyzed by using Cause and Effect Diagrams. The significant causes were ranked by FDEAHP under three criteria, Severity (S), Occurrence (O) and Detection (D), followed by the framework of the FMEA Technique. Two causes with the highest Final Weight (FW) of each problem were selected to be improved, such as installing auxiliary equipment, using the Poka-Yoke system, setting the scale of the shaft and lathing the bushes of each bottle size. The results demonstrated a reduction in defects from 3.209% to 1.669% and showed that improving a few significant root causes, identified by an experienced decision maker, was sufficient to reduce the defect rate.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1511_1512
• /
• 2009

This paper presents a polarization switching antenna integrated with silicon RF MEMS SPDT switches in the form of a package. A low-loss quartz substrate made of SoQ (silicon-on-quartz) bonding is used as a dielectric material of the patch antenna, as well as a packaging lid substrate of RF MEMS switches. The packaging/antenna substrate is bonded with the bottom substrate including feeding lines and RF MEMS switches by BCB adhesive bonding, and RF energy is transmitted from signal lines to antenna by slot coupling. Through this approach, fabrication complexity and degradation of RF performances of the antenna due to the parasitic effects, which are all caused from the packaging methods, can be reduced. This structure is expected to be used as a platform for reconfigurable antennas with RF MEMS tunable components. A linear polarization switching antenna operating at 19 GHz is manufactured based on the proposed method, and the fabrication process is carefully described. The s-parameters of the fabricated antenna at each state are measured to evaluate the antenna performance.

• Conservation Science in Museum
• /
• v.16
• /
• pp.32-45
• /
• 2015

The bronze incense burner, discovered in Chungung-dong, Hanam, Gyeonggi-do in 1971, is a hanging incense burner dating from the Goryeo period. The incense burner was covered with a thick layer of clay. The object was in a severely deteriorated state, affected by bronze disease which resulted in extensive corrosion. Numerous cracks were present across its surface, and some parts had been broken off. To preserve and display the bronze incense burner in a stable condition, deposits of foreign material were removed from the surface, and the weakened metal was strengthened. Cracked and broken areas were reinforced using woven glass fiber, followed by the application of epoxy resin to restore the shape. To investigate the method of production, a chemical analysis was performed, and the microstructure was examined. The chemical analysis revealed that the body of the incense burner as well as the ear, loop, lid and the knob were cast in a ternary alloy of Cu-Sn-Pb. Moreover, copper nails with high copper content were used to securely join the ear to the body of the incense burner. The microstructure was mainly α-phase, and non-intermetallic inclusions composed of Cu and S were detected.