• 보존과학회지
• /
• 제35권2호
• /
• pp.169-176
• /
• 2019

국립민속박물관에서 소장하고 있는 19세기 말~20세기 여성용 쓰개에 사용된 장식 19점에 대하여 SEM-EDS로 조성을 분석하였다. 쓰개 장식 16점은 융제 성분인 $Na_2O$와 PbO를 함유하고 있어 한국의 고대부터 출토되거나 전승되어온 납유리와 조성이 다른 유형의 납유리였다. 쓰개 장식 2점은 $Na_2O$와 $K_2O$가 3% 혹은 5% 이상 함유한 알칼리혼합유리, 1점은 CaO를 5% 이상 함유한 포타쉬유리 III형으로 분류되었다. 이 중 납유리는 일제강점기 조선에 수입된 일본의 공예용 납유리와 조성이 유사하여, 19세기 말~20세기 여성용 쓰개 중 납유리를 사용한 장식은 원료를 일본에서 수입하였거나 조선 내 일본인 기술로 생산한 공예용 납유리로 제작된 것으로 추정된다. 이를 통해 근현대에 들어서 전통적으로 사용되어온 쓰개 장식의 사용된 옥이나 호박과 같은 보석이 일본에서 수입된 공예용 납유리로 대체되어 새롭게 사용되었음을 보여주고 있다.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1093-1102
• /
• 1995

Water-soluble phosphate glasses containing Ag or Cu ion were prepared through melting process. Then the powdered glass samples were dissolved in D.I. water at room temperature with changing the dissolution time. In terms with the glass composition, dissolution characteristics, bactericidal effects and cytotoxicities were investigated. Dissolved amounts increased uniformly with dissolution time, and the dissolution rate was higher for ternary glass than for binary glass and with less metal oxide amount. And the dissolution rate of the glass with Ag ion was higher than that with Cu ion, and the bactericidal effect of the glass with Ag ion was also greater. Solution with more than 25 ppm of Ag was observed to have strong cytotoxicity to L929, and solutions of lower Ag concentration or with Cu seemed to have little cytotoxicity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.321-321
• /
• 2008

To obtaingood resolution in PDP, one of the important factors is to achieve the accuracy of barrier ribs. The photolithographic process can be used to form patterns of barrier rib with high accuracy and a high aspect ratio. The composition for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system including additives such as alkali oxides and alkali earth oxides. The refractive index and thermal properties in glass system are changed by amount of alkali oxides and alkali earth oxides. Therefore, it is important that additives are controlled to have proper refractive index and thermal properties. The additives are contributed to non-bridging oxygen within the glass network, causing a change of density. In addition to a change of the structural cross-link density, the refractive index, dielectric and thermal properties glass are correlated with ionic radius and polarizability of cations. In this study, we investigated the refractive index and the thermal properties such as glass transition temperature, glass softening temperature and coefficient of thermal expansion by changing composition in the $B_2O_3-SiO_2-Al_2O_3$ glass system.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.560-564
• /
• 2022

In this study, lanthanum boron silicate glasses were prepared with a composition of x Li₂O-(60-x)B₂O₃-5CaO-5BaO-7ZnO-10SiO₂-10La₂O₃-3Y₂O₃ where x = 1,3,5,7, and 9 mol%. Each composition was melted in a platinum crucible under atmospheric conditions at 1,400 ℃ for 2 h. Clear glasses with a transmittance exceeding 85 % were fabricated. Their optical, thermal, and physical properties, such as refractive index, Abbe number, density, glass transition (T_g) and Knoop hardness were studied. The results demonstrated that refractive index was between 1.6859 and 1.6953 at 589.3 nm. The Abbe number was calculated using an equation for 589.3 nm (nd), 656.3 nm (nf) and 486.1 nm (nc) and was observed to be in the range from 57.5 to 62.6. As the Li₂O content increased, the glass transition temperature of the optical glass decreased from 608 ℃ to 564 ℃. If glass mold pressing is performed using a material with a low transition temperature and high mechanical strength, then the optical glasses developed in this study can be completely commercialized.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.183-188
• /
• 1995

The properties of the glasses are not dominantly dependent on the chemical composition, temperature, and pressure but also on the thermal history. For example, electrical, thermal, optical, and mechanical properties are all known to be strongly dependent on the thermal history. Fluoride glasses have received a great deal of attention as candidate materials for an infra-red transmitting medium. A series of fluoride glasses and fibers were prepared under a nitrogen atmosphere. Thermal history effects of the fluoride glass fibers associated with the fast cooling rate employed during the fiber drawing process were discussed in terms of the glass temperatures and the fictive temperatures on the basis of the results obtained from the Differential Scanning Calorimeter (DSC) measurements of the fiber and bulk forms of the same chemical composition.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1054-1058
• /
• 1993

The effects of TiO2 addition as a nucleating agent on the cordierite glass-ceramics were investigated. The glass compositiion was stoichiometric cordierite composition of 13.7MgO-34.9Al2O3-51.4SiO2(wt%), and TiO2 as a nucleating agent was added by 5, 10 and 15wt% in addition. The optimum amount of TiO2 addition and appropriate heat treatment schedule were determined by using dilatometer, DTA, XRDA and SEM. The composition containing 10wt% TiO2 was proved to be the best among the investigated compositions. And the optimum heat treatment schedule was 840℃-2h for the nucleation and 1140℃-2h for the crystallization. The properties were as follows. The crystallinity was ∼75%, thermal expansion coefficient 33×10-7/℃(25∼700℃), dielectric constant 7.6(1KHz) and Vicker's hardness 5.1GPa.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.472-476
• /
• 2024

It is important that radioactive and nuclear wastes are immobilized in a glass composition with lower melting temperatures due to their economy. In this study, the elastic and mechanical properties of sodium borate-based vitrified radioactive waste were measured using ultrasonic techniques. Many ultrasonic parameters, such as elastic moduli, Poisson's ratio, and microhardness, were calculated by measuring the ultrasonic velocities of the glasses. The ultrasonic velocity data, the density, the calculated elastic moduli, micro-hardness, softening temperature, and Debye temperature depending on the glass composition were evaluated, and the relation with the structure was clarified. It was observed that the elastic modulus and Poisson ratio increased as the Cs₂O content increased in glasses containing Cs waste. This result shows that the rigidity of the network structure of these glasses increases in contrast to the glass containing Sr.

• 마이크로전자및패키징학회지
• /
• 제6권1호
• /
• pp.51-58
• /
• 1999

지르코니아에 접합과 반응성이 정합되며 고온에서 물리화학적으로 안정성을 갖는 접합재를 제조하기 위하여 silicate계 유리의 조성에 따른 적심특성, 결정화 및 반응성등 제반 특성을 고찰하였다. 지르코니아와의 열팽창계수가 정합 될 수 있는 유리계에 대한 조성 실험하였다. Alkaline earth silicate 유리는 적심성이 우수하였으며 적심각이 낮으며 $B_2O_3$의 첨가함로써 유리의 점도를 조절 및 결정화를 억제할 수가 있었다. $900^{\circ}C$ 이하에서 적심공정에 일어났으며 $800^{\circ}C$에서 10시간동안 유지한 후에 결정화와 계면 반응을 조사한 결과 기공이 많이 발생하였으며 $B_2O_3$를 15mo1% 첨가한 경우 흐름성이 증가하였으며 기판과의 반응성이 높아졌다. 기공을 없애기 위해서는 공정변수를 조절하여 유리의 소결을 촉진할 필요가 있으며 유리점도와 반응성에 관한 최적화가 요구된다. 본 연구에서는 유리-세라믹필러 복합체의 고온적심성에 대하여 조사하였다. Filler로서 $ZrO_2$분말을 여러 조건으로 열처리하여 분말종류와 첨가량에 따라 기공, $ZrO_2$ filler의 형상 및 계면반응 등을 고찰하였다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.39-42
• /
• 2017

E-glass (electrical glass) fiber is the widely used as a reinforced composite material of PCBs (printed circuit boards). However, E-glass fiber is not stable because it has a dielectric constant of 6~7. On the other hand, D-glass (dielectric glass) fiber has a low dielectric constant of 3~4.5. Thus, it is adaptable for use as a reinforcing material of PCBs. In this study, we fabricated D-glass compositions with low dielectric constant, and measured the electrical and optical properties. In the glass composition, the boron content was changed from 9 to 31 wt%. To confirm the dependence of the dielectric constant on melting properties, D-glass with 22 wt% boron was melted at $1550^{\circ}C$ and $1650^{\circ}C$ for 2hrs. The glass melted at $1650^{\circ}C$ had a lower dielectric constant than the glass melted at $1550^{\circ}C$. Therefore, the D-glass with boron of 9~31 wt% was fabricated by melting at $1650^{\circ}C$ for 2hrs, and transparent clear glass was obtained. We identified the non-crystalline nature of the glass using an XRD (x-ray diffractometer) graph. The visible light transmittance values depending on the boron contents were measured and found to be 88.6 % ~ 82.5 %. Finally, the dielectric constant of the D-glass with 31 wt% boron was found to have decreased from 4.18 to 3.93.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.