• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.235-241
• /
• 1989

Static according tests were carried out on a series of amorphous TbFe thin films of various composition under a constant laser irradiation condition. Examination of recorded domain configurations by using polarizing microscope led to the categorization of domain characteristics into 3 distinctly different types; i.c., type A: circular domains with smooth boundaries, the size not sensitive to variation of bias field, type B: domains of irregular shape at low bias, the size increasing and the boundaries getting smoother and more circular with increasing bias field and type C: not recordable. Critical factor which distinguishes among each types was fond to be the relative magnitude of H and H of the film near T, regardless of constituent atomic species. Micromagnetical process of thermomagnetic recording cycle was analyzed scheniatically for each type.

• 간호행정학회지
• /
• 제12권3호
• /
• pp.491-500
• /
• 2006

Purpose: This study was to compare degree of stress, stress coping, adaptation and job satisfaction between Type A and Type B of new graduate nurses'personality. Methods: Seventynine new graduate nurses employed 2003 in an university hospital located in Gyeonggi-do were participated. Data for self-reported questionnaire were collected base on 5 point of time, 1st week and 3rd, 6th, 9th, 12th Month after their employment. Results: New Graduate Nurses' Stress were persistently increased. The statistically significance of positive correlations between stress and coping showed, but their correlations were getting reduced during 1 year. Type B was higher than Type A in stress and adaptation for 12 months. But, Type B of coping was higher up to 9th month, yet abruptly Type A was higher at 12th months. In Job Satisfaction, Type A was higher at 3rd and 6th months, but it was reversed from 9th months. Conclusion: Socialization education for new graduate nurses should be done in organization since their stress were continually increased and their job satisfaction was decreased after 9 months after employed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.458-461
• /
• 1995

A new type of rotational motor which is developed has a resolution smaller than 10 $^{-4}$ radian and can be accessed for full rotational angles. The operation principle of the motor is based on inchworm motion of two belt driving mechanism. Flexure hinge mechanism, which is pertinent to symmetry construction of the motor, is designed to minimze the effort to frame and is analyzed by using finite element method. Depending on input signal amplitude, rotational angle by one cycle is varied form 0.2*10 $^{-4}$ rad to 9.76* $^{-4}$ rad. This shows that it has the capability of getting very small rotational angle by considering radius of rotor and amplitude of input signal.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.97-102
• /
• 2011

The size of TV and TFT-LCD are bigger and bigger for the next generation exposure equipment install that existing fab are getting a lot of additions. When the new fab build an extension that the shortening of the construction and non-vibration are use cast in place concrete pile method. In this study when lay the foundation of existing fab adjoin use vibration monitoring system are rotator type all casing method among cast in place concrete pile method. The evaluation of ground vibration of rotator type all casing method effect to precision equipment and vibration area of influence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.471-475
• /
• 2001

Planetary Speed Reducer consists of a sun gear, a planetary gear and a ring gear and if one element is fixed at this Speed Reducer, another elements operate to become a drive-axis and a subordination-axis respectively. Planetary Speed Reducer is frequently used for gear Speed Reducer because it has the advantage of having the high efficiency and getting the high Speed Reducer ratio in small space. However, it is difficult to know the current transmitted torque immediately during the use of Speed Reducer and so complicated equipment is installed in addition to protect the overload of system. The object of this paper is to design the Speed Reducer of torque- meter type that can know the torque transmitted using the power transmission feature of a simple Planetary Speed Reducer fixed at ring gear.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.911-914
• /
• 2014

인터넷이 우리의 생활의 기본 인프라로 자리 잡고 사이버 공간에서의 생활이 일상화되면서 부가적인 많은 문제점들이 생겨났다. 그 중 사이버 침해는 정보사회의 가장 심각한 문제 가운데 하나가 되었다. 해마다 증가하는 사이버공격, 지능화되고 진화하는 공격 유형 등으로 사이버 생태계가 더 복잡해지고 있다. 따라서 본 연구에서는 최근 인터넷 침해 사고 현황과 인터넷 침해 유형 및 해킹방법을 분석하고 국내 대응 조직 및 국제 협의체 현황을 분석하였다.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.43-48
• /
• 2001

In this paper, the real-time prediction of high temperature creep strength and creep for nickel-based superalloy Udimet 720 (high-temperature and high-pressure gas turbine engine materials) was performed on round-bar type specimens under pure load at the temperatures of 538, 649 and 704$^{\circ}C$. The predictive equation of ISM creep has better reliability than that of LMP and LMP-ISM, and its reliability is getting better for long time creep prediction ($10^3~10^5$h).

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.50-55
• /
• 1997

본 연구에서는 일반적으로 생산 현장에서의 로봇 작업이 "getting"과 "putting"의 동작으로 구서 되는 것에 기초하여 이들 동작을 분류. 표준화하여 2단계의 단위동작 (GET, PUT) 별로 여러 가지의 모듈을 설정하고, 동작거리별로 표준시간을 산출하는 기법을 다룬다. 즉 기존의 로봇 작업측정법이 작업을 기존동작으로 분석하는 것과는 다르게 시간의 변동요인인 모듈의 Type과 동작거리의 Case를 선택함으로써 표준시간을 설정한다.를 선택함으로써 표준시간을 설정한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.549-552
• /
• 2003

User's demand, as a maintenance for durability of construction and a comfortable life, and an incentive systems for new waterproofing system incite waterproofing company to evolve new waterproofing system that is upgraded waterproofing quality by getting advantages for the existing waterproofing systems. There are seven new waterproofing systems for building roof to be authorized from Ministry of construction & transportation. Those are multi-layers waterproofing system, and five of those are the insulation type. A trend of new waterproofing systems for building roof is multi-layers waterproofing system insulated.