• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.245-254
• /
• 2017

본 연구에서는 실내실험을 통해 위어의 설치 각도 변화에 대한 위어 상하류에서 흐름특성 변화와 하도 변화를 정량적으로 분석하였다. 위어의 설치 각이 증가함에 따라 위어의 길이는 증가하지만, 위어의 유효길이는 감소하였다. 위어 상류에서는 유사가 퇴적되어 배수가 형성되는 지점에서 델타가 발달하고, 하류로 이동하였다. 델타의 이동속도는 위어에 가까워질수록 감소하며, 크기는 증가하였다. 무차원 위어의 길이가 증가함에 따라, 무차원 사주의 파장이 감소하고, 무차원 사주의 파고는 증가하였다. 무차원 사주의 파장이 증가함에 따라 무차원 사주의 파고는 감소하였다.

• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.82-94
• /
• 2010

Recently, biomass application for energy is getting more interests from many countries since biomass is widely available over the nation wide, whereas fossil fuels are produced in several limited regions. Recognizing the importance, government is promoting renewable energy use in Korea. The locational characteristics of the existing biomass potential directly can be used to decide scale of power plant for local agricultural facility. Although there are a few studies on feasible biomass potential in local areas, it is expected that both government and commercial sectors recognize the potential of biomass energy and the importance of reducing greenhouse gases. When planning biomass energy systems, biomass price is determined by the costs of collection, transportation, chipping, drying if required. In this paper investigates the economic and spatial characteristic of biomass location by land use map. However typical area of each categories in local region is not correct to agricultural census data. Therefore we concerned about how to calculate feasible biomass potential which it can be describing total amount of plant scale, and to match both of data. Even though its spatial distribution, in rural area in Korea, to expand biomass energy programs in the area, government serve to find areas of higher biomass production with suitable locations for plants to convert to bio-energy in order to increase the usage of renewable energy.

• 농촌계획
• /
• 제19권4호
• /
• pp.177-189
• /
• 2013

3D modeling and rendering technologies are getting more attention from landscape planners and architects because the virtual reality based on 3D graphic technology could give more realistic experience to landscape simulation users and boost promotional effects. The 3D landscape simulation, however, not only requires a lot of cost and time in production, but also demands efforts to distribute to consumers due to various computing environment of them. The purpose of this study is to suggest a process for developing an interactive 3D landscape simulator with low-cost, which can support multi-platform functionality in high quality through reviewing related current software and web services. We select GIMP for 2D image texturing, SketchUpfor 3D modeling, Unity for real-time rendering, and Google Earth for terrain modeling considering price and workability and apply the developed process for Windows, Web, and Android versions to test the applicability for Sangji-ri, Gosam-myeon, Gyeonggi-do, Korea.

• 대한교통학회지
• /
• 제28권1호
• /
• pp.7-14
• /
• 2010

세계화의 진전에 따라 항만위주의 국제무역 관행이 공항으로 전이되고 있으며, 공항에서 물류기능의 비중은 이전보다 훨씬 커지고 있다. 공항은 한 국가의 경제수준과 과학기술수준을 총체적으로 나타내주는 사회간접자본의 역할과 다국적 기업들의 생산, 판매, 운송 과정을 통합적으로 관리해주는 물류중심지로서 기능이 확대되고 있다. 공항의 경쟁력은 국제물류거점으로서 배후단지 기능과 해당 공항의 경쟁 우위 요소에 대한 지속적인 관리에서 나온다. 이 논문에서는 국제물류거점으로서 허브공항이 되기 위한 요인과 인천, 나리타, 간사이, 나고야, 창이, 타이페이 공항으로 허브공항으로서의 경쟁력을 연구하였다.

• 대한공간정보학회지
• /
• 제17권1호
• /
• pp.105-111
• /
• 2009

최근 각종 건설현장에서 최신측량기술을 이용한 다양한 정보 취득을 통해 시공성 및 안전성을 높이는 연구가 활발히 진행되고 있다. 디지털 영상은 영상 취득이 간편할 뿐만 아니라 영상으로부터 다양한 정보를 취득할 수 있기 때문에 최근 영상처리기술의 발전과 더불어 많은 활용성이 기대되고 있다. 본 연구에서는 터널과 같은 지하공간의 경우 일반렌즈로는 영상 촬영이 어려운 단점을 극복하기 위하여 어안렌즈를 활용한 영상 취득을 제안하였으며, 터널벽면을 모자이크 영상으로 매핑하는 프로그램을 개발하였다. 터널벽면에 대한 모자이크영상은 터널현장에서 절리면의 검출과 콘크리트 라이닝의 균열, 누수, 백화, 박리 등의 이상을 검측하고 분석하는데 활용될 수 있다.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.66-72
• /
• 2005

GPS반송파 위상을 이용한 측위시 미지정수 결정없이 위치해를 구하는 방법 중 하나인 시각차분의 특성을 분석한다. 필요로 하는 정확도의 위치해를 구할 때, 시각차분을 이용하게 되면 차분 시간간격이 중요한 판단요소가 된다. 차분 시간간격이 클수록 정밀도는 향상되고 일정 차분간격 이후부터는 수cm의 일정한 정밀도를 유지한다고 알려져 있는데, 본 논문에서는 실제 데이터로 이러한 시각차분의 특성을 파악하고, 시각차분의 정밀도를 알 수 있는 새로운 파라미터를 제안한다. 제안된 파라미터로 위치오차가 수cm로 수렴할 때의 차분 시간간격을 추정함을 확인한다.

• 한방안이비인후피부과학회지
• /
• 제33권1호
• /
• pp.45-55
• /
• 2020

Objectives : The objective of this study is to review the Trend of clinical trials conducted with the acupuncture treatment on Atopic Dermatitis. Methods : Through 4 foreign online databases(PubMed, Cochrane library, EMBASE, CNKI) and 3 domestic online databases(NDSL, RISS, OASIS), we searched for clinical studies performed acupuncture treatment for Atopic Dermatitis from 2010 to December 2019. Only randomized controlled trials(RCT) was selected and anlayzed according to the research method. Results : A total 4 studies were reviewed. LI11, ST36, SP10 were most frequently used acupoints in acupuncture treatment. Among the evaluation indexes, SCORAD, VAS, DLQI were used most. In most of the 4 studies, acupuncture treatment showed significant therapeutic effects. Conclusions : These results suggest that it is necessary to develop more detailed standards about Acupuncture treatment method as the method of acupuncture is getting more diverse, and objective tools are needed in evaluating Atopic Dermatitis.

• 대한안전경영과학회지
• /
• 제11권1호
• /
• pp.183-191
• /
• 2009

The purposes of this research are presenting a new business model by introducing USN/ZigBee and measuring productivity using BSC(Balanced scorecard), and becoming a cornerstone by presenting a prototype of ServiceScience which is getting more attention from Industrial Engineering and Management. The new business model consists of development of leak current monitoring sensor using USN/ZigBee and the adoption of RCM(Reliability-Centered Maintenance) using knowledge-based system at current distribution. Additionally, for the measurement of this new model's productivity, ESC is used, and the strategic map and measurement indices are produced. The main contributions of this paper are showing a concrete model of ServiceScience and demonstrating this model can be extended to similar areas like are gas, water etc.

• 한국CDE학회논문집
• /
• 제14권6호
• /
• pp.415-423
• /
• 2009

Because of the fast changing car design and increasing facilities, manufacturing process of cars is getting more complex now a days. Particularly, car manufacturing system that consist of automated devices, applies various simulation techniques to validate device motion and detect collision. To cope with this problem, traditional manufacturing system deployed test-run with the real devices. However, increased computing power in a contemporary manufacturing system changes it into realistic 3D simulation environment. Similarly, managed device data that was generated using 2D traditionally, can be converted to 3D realistic simulation. The existing problem with 3D simulation is disjoint data interaction between different work stations. Consequently, JIGs, fixing the car part accurately, are changed according to fixing position on the part or a part shape properties. In practice, the 3D JIG data has to be managed according to kinematic information, but not of its features. However, generating kinematic information to the 3D model repeatedly according to frequent change in part is not explained in current literatures. To fill this knowledge gap, this paper suggests an improving method of rendering 3D JIG kinematics information to simulation model. Thereafter, it shows the result of implementation.

• 한국식품조리과학회지
• /
• 제11권2호
• /
• pp.145-152
• /
• 1995

The purpose of this study was to investigate the conciousness of college students about Korean folk foods. Questionnaires were distributed to 400 students and answered by 289 in the college in Kyung-gi Do and Je-ju Do. The results were as follows: 1. 49.8% of the students had little knowledge about Korean folk foods, 36.7%, 12.8% and 0.7% of the subjects were answered'know little','know somewhat', and'know well', respectively. 2. This study revealed that 25.6% of students ate folk foods'on a journey', 21.1% of subjects did'normal times', and 20.4% of them did'festival days'. 3. Students answered that they ate folk foods 3 or 4 times in a year mostly at home. 4. 96.5% of the subjects thought that Korean folk foods had to be succeeded, but 64.0% of the students knew about Kang-won Do folk foods, 34.3% of them answered correctly about Seoul folk foods, and 40.1% of them did Che-ju Do folk foods, and only less than 20% of them had an expert knowledge on the other folk foods. 5. The percentage of getting a correct solution was higher in men than women, majoring in foods than non- food relation, and taking a lesson in Korean folk foods than no lessons.