• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.433-434
• /
• 2006

Monosized germanium micro particles are prepared by a newly developed Pulsated Orifice Ejection Method. The obtained particles are categorized into two kinds of the microstructures as refined and coarse ones. The morphological difference is estimated to be determined by the undercooling level during nucleation. Actually, the increase in the temperature of the melt was effective in coarsening the microstructure, because the temperature of the melt intensely relates to the undercooling level. The transition temperature of coarse and refined microstructures is found to be 1300-1350K. Furthermore, a triggered nucleation could improve the crystallinity of the particles in the short separation.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.687-692
• /
• 2010

This paper surveys emission characteristics of Far-infrared of the fabrics fabricated with germanium imbedded sheath-core conjugate composite filaments. For this purpose, master batch chip was prepared with PET semi-dull chip and nano sized germanium particles and sheath-core type conjugate composite filament was spun using this master batch chip and polyester semi dull. The emission power and emissivity of the germanium imbedded fabrics were measured and investigated using FT-IR spectrophotometer by KICM- FIR 1005 measurement method. In addition, the fabric mechanical properties were measured and discussed with the effects of the optimum texturing process conditions and fabric structural design conditions. The sheath/core type PET composite germanium imbedded filaments were manufactured by the optimum spinning condition, its tenacity and breaking strain showed the same level as the regular PET filament. The tenacity and breaking strain of the DTY showed good physical properties and no problem in the weaving process. Then, wet and dry shrinkages showed higher values than those of regular PET filament. The emission power of the germanium imbedded fabric was $3.53{\times}10^2W/m^2$ at the $5-20{\mu}m$ wave length range, and emissivity was 0.874. The fabric hand of germanium imbedded fabrics was inhanced by the optimum texturing process and fabric structural design with improved mechanical properties such as fabric bending and compressional properties.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.4
• /
• pp.273-279
• /
• 2007

In order to estimate the sedimentation rates of continental shelf and slope of Ulleung Basin in the Southwestern East Sea, $^{210}Pb,\;^{226}Ra\;and\;^{137}Cs$ were simultaneously measured by a well-type high purity germanium(HPGe) gamma detector. $^{137}Cs$ was used to determine whether the sediment were affected by bioturbation or not, and to judge the accuracy of estimated sedimentation rates. The estimated sedimentation rates decreased exponentially from slope to basin - 0.6 cm/yr in the continental shelf, $0.3{\sim}0.4$ cm/yr in the slope, and below 0.2 cm/yr in the margin of Ulleung basin. From our and other research results, we suggest followings about sediment transport of the study area. The sediment particles were transported by coastal current from south to north through the Korea Straight. And much of them were accumulated in the shelf area. And then, the rest of sediment particles were deposited in the lower slope and the southwest margin of the basin. Also the excess $^{210}Pb$ profiles indicate that the depositional processes in the study area may have been very complicate.