• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.418-428
• /
• 2017

In offshore area, newly deposited Quaternary loose seabed soils are widely distributed. There are a great number of offshore structures has been built on them in the past, or will be built on them in the future due to the fact that there would be no very dense seabed soil foundation could be chosen at planed sites sometimes. However, loosely deposited seabed foundation would bring great risk to the service ability of offshore structures after construction. Currently, the understanding on wave-induced liquefaction mechanism in loose seabed foundation has been greatly improved; however, the recognition on the consolidation characteristics and settlement estimation of loose seabed foundation under offshore structures is still limited. In this study, taking a semi-coupled numerical model FSSI-CAS 2D as the tool, the consolidation and settlement of loosely deposited sandy seabed foundation under an offshore breakwater is investigated. The advanced soil constitutive model Pastor-Zienkiewics Mark III (PZIII) is used to describe the quasi-static behavior of loose sandy seabed soil. The computational results show that PZIII model is capable of being used for settlement estimation problem of loosely deposited sandy seabed foundation. For loose sandy seabed foundation, elastic deformation is the dominant component in consolidation process. It is suggested that general elastic model is acceptable for subsidence estimation of offshore structures on loose seabed foundation; however, Young's modulus E must be dependent on the confining effective stress, rather than a constant in computation.

• 지질공학
• /
• 제15권3호
• /
• pp.309-323
• /
• 2005

지반의 동적 강성은 내진 설계나 내진 성능 평가외에도 구조물의 거동평가에 필요한 중요한 지반 정수이다. 지난 수십년동안 이 물성을 효율적이고 정밀하게 측정하기 위해, 여러 가지 검측공 탄성파 시험 기법들이 개발 및 적용되어왔다. 게다가, 최근 지하 공간의 개발 및 구조물의 대형화로 인해 암반 강성의 평가를 위한 신뢰성 있는 지반 조사기법의 개발이 더욱 절실히 요구되고 있다. 본 논문에서는 "인홀 탄성파 시험"으로 명명된 새로운 기법을 적용하여 구조물 기초 암반과 터널 막장 암반의 동적 강성을 측정하였다. 국내 여러지역의 암반에서 수행한 인홀 시험 결과를 다른 탄성파 시험 결과와 비교함으로써 인흘 시 험 기법의 신뢰도를 평가하고, 이 기법의 효율성과 정밀성을 입증하였다.

• 한국지반환경공학회 논문집
• /
• 제7권1호
• /
• pp.67-80
• /
• 2006

본 논문에서는 지반 하이브리드-온라인 시뮬레이션의 방법을 압밀 해석에 적용하기 위한 시도를 수행하였다. 일반적인 수치해석법이 실내시험을 통해 얻어진 흙의 구성모델을 이상화시켜 사용하는 것과 달리, 이 방법에서는 흙의 거동을 요소시험체로부터 직접 도입해가면서 해석을 수행한다. 그러므로 복잡한 파라미터의 평가과정이 생략될 수 있게 되며 인위적 이상화에 의한 해석 오차를 경감할 수 있게 된다. 본 논문에서는 실험장치의 물리적 성능을 검증하기 위하여 단계압밀시험과 투수시험(CONPERM test)을 수행하여 제어와 계측의 결과를 고찰하였으며, 시스템으로부터 얻은 데이터의 건전성을 평가하기 위하여 검증해석을 수행하였다. 결과적으로, 본 연구를 통해 개발된 하이브리드-온라인 압밀해석 시스템은 재성형된 카오리나이트의 압밀거동을 모순없이 재현하고 있음을 알 수 있었다.

• 한국지반신소재학회논문집
• /
• 제14권2호
• /
• pp.57-70
• /
• 2015

본 논문에서는 지열활용 지반구조물 적용시 주변 지반에 부과되는 온도변화 사이클이 흙의 물리적 역학적 특성에 미치는 영향에 대한 내용을 다루었다. 이를 위해 모래와 화강풍화토를 대상으로 다양한 온도변화 조건을 구현하고 이에 따른 흙의 입자구조 및 열전도특성 변화 경향을 고찰하였다. 아울러 다양한 온도변화에 노출된 시료를 이용하여 시편을 조성한 후 삼축압축시험을 수행하고 그 결과를 토대로 온도변화가 시편의 응력-변형률-강도 톡성에 미치는 영향을 검토하였다. 그 결과 온도변화 사이클은 흙의 입자구조 및 열전도율에 큰 영향을 미치지 않는 것으로 검토되었다. 또한 임의 반복 사이클 $N_{hc}$에 있어 가열시간이 $H_d=2{\sim}8hrs$ 변화함에 따라 최대 축차응력이 15%이상 감소하는 것으로 나타나 가열-냉각 반복작용에 의한 흙의 강도특성 변화는 흙의 종류에 따라 달라 질수 있는 것으로 검토되었다.

• 한국지반신소재학회논문집
• /
• 제17권3호
• /
• pp.47-55
• /
• 2018

도심지 지반함몰 현상은 최근 5년간 그 빈도수가 급속히 증가하고 있다. 지하공동의 발달은 지표 침하를 발생시키고 그로 인한 포장재의 취성파괴를 유발시킨다. 본 연구는 도심지 지반함몰의 주원인인 노후화된 하수관로 손상에 의한 지반침하를 예방하기 위한 평가기법 개발 기초연구 이다. 이를 위해 본 연구에서는 노후하수관로 하수관로 CCTV 조사를 통해 지반침하 발생 위험구간에 대해서 GPR 조사를 수행하였다. 하수관로 CCTV 조사와 GPR조사 결과를 통해 노후하수관로의 파손, 이음부 이탈, 토사퇴적 부위에서 지반 이상신호를 확인 할 수 있었다. GPR 조사를 통해 노후하수관로 주변 지반의 공동발생 가능성과 지반이완상태를 평가하였다. 본 연구결과를 통해 CCTV와 GPR 데이터의 결과를 이용한 상관관계 평가방법을 이용하면 하수관로 손상으로 인한 지반침하를 예방할 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.173-182
• /
• 2000

To find axial and lateral responses of impact-driven H piles in embankment(SM), the H piles are instrumented with electric strain gages, dynamic load test is performed during driving, and then the damage of strain gages is checked simultaneously. Axially and laterally static load tests are performed on the same piles after one to nine days as well. Then load-settlement behavior is measured. Furthermore, to find the set-up effect in H pile, No. 4, 16, 26, and R6 piles are restriked about 1, 2, and 14 days after driving. As results, ram height and pile capacity obtained from impact driving control method become 80cm and 210.3∼242.3ton, respectively. At 15 days after driving, allowable bearing capacity by CAPWAP analysis, which 2.5 of the factor of safety is applied for ultimate bearing capacity, increases 10.8%. Ultimate bearing capacity obtained from axially static load test is 306∼338ton. This capacity is 68.5∼75.7% at yield force of pile material and is 4∼4.5 times of design load. Allowable bearing capacity using 2 of the factor of safety is 153∼169ton. Initial stiffness response of the pile is 27.5ton/mm. As the lateral load increases, the horizontal load-settlement behaves linearly to which the lateral load reaches up to 17ton. This reason is filled with sand in the cavity formed between flange and web during pile driving. As the result of reading with electric strain gages, flange material of pile is yielded at 19ton in horizontal load. Thus allowable load of this pile material is 9.5ton when the factor of safety is 2.0. Allowable lateral displacement of this pile corresponding to this load is 23∼36mm in embankment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.539-550
• /
• 2006

New Songdo city is currently developing on the reclaimed land on a marine deposit and among the development the four sixty-four(64) stories high rise buildings are under construction at block 125. The ground condition of the site is comprised of a deep seated weathered rock staratum under a soft marine deposit layer. As a foundation system, a bored pile was planned to transmit the applied load to the stable layer. In this study, the behavior of the weathered rock especially locating at a upper part having a weak strength(HWR, MWR) has been evaluated through series of hi-directional pile load test(BD PLT) carried out on the 3 drilled shafts socketed in a weathered rock layer in a design stage. It has been planned to increase the effect of the tests that the length of test piles was prepared short enough to perform the test under a high stress. The summary of the design reflecting the test results has been made up. In addition, the 4 hi-directional pile tests excuted on the working piles during the construction stage for the purpose of confirmation and the evaluation of the adequacy of the pile behaviors have been included in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.320-329
• /
• 2005

The use of diverse methods for the retaining system has been continuously increased in order to maintain the stability during excavation. However, ground anchor system occasionally may have the restriction in urban excavation sites nearby the existing structures because of space limitation. In this case, soil nailing system with relatively short length of nails could be efficiently useful as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in excavating the zone of weak soils or nearby the existing structures. Therefore, applying the pretension force to the soil nails then could play important roles to reduce deformations mainly in an upper part of the nailed-soil excavation system as well as to improve the local slope stability. In this study, a newly modified soil nailing technology named as the PSN(Pretention Soil Nailing) is developed to reduce both facing displacements and ground surface settlements during top-down excavation process as well as to increase the global slope stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, the field tests including pull-out tests were fulfilled to investigate the behavior of characteristics for PSN system. All results of tests were also analyzed to provide a fundamental and efficient design.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.521-532
• /
• 2008

Supporting system design and construction management for the soft and hard rock layers with fractured zones are very important theme for the safety of temporary retaining wall, surrounding ground and structures in the urban deep excavation for the construction of subway, railway, building etc. The prevailing design method of supporting system for the soft and hard rock layers in the deep excavation is mostly carrying out by simplification without proper consideration for the characteristic of rock discontinuities. Therefore the behaviors of rock discontinuities and fractured zones dominate the whole safety of excavation work in the real construction stage, serious disaster due to the failure of temporary retaining wall can be induced in the case of developing large deformations in the ground and large axial forces in the supporting system. This paper introduces examples of deep excavation where the soft and hard rock layers with fractured zones were designed to be supported by shotcrete and rock bolt, deformations of corresponding ground and supporting systems in the construction period and increments of axial force in the upper earth anchors and strut due to the these deformations were investigated through detailed analysis of measurement data, the results were so used for the management of consecutive construction that led to the safe and economical completion of excavation work. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.495-508
• /
• 2010

Vertical drains are commonly used to accelerate the consolidation process of soft soils, such as dredged materials. The installation of vertical drain provides a radial drainage path to water in the deposit soil in addition to the vertical direction. An estimation of time rate of settlement is considerably complicated when vertical drains are installed to enhance consolidation process of dredged material because the vertical drains are commonly installed before self-weight consolidation is ceased. In this paper, the vertical drain theory developed by Barron(1948) is applied to analyze the non-linear consolidation behavior considering radial drainage. The overall average degree of self-weight consolidation of the dredged soil under the condition that the water is drained in both radial and vertical directions is estimated using the Carillo(1942) formula. In addition, the Morris(2002) theory and the one-dimensional non-linear finite strain numerical model, PSDDF, are applied to analyze the self-weight consolidation in case of only the vertical drainage is considered. The new analysis approach proposed herein can simulate properly the time rate of the self-weight consolidation of dredged materials that is facilitated with vertical drains.