• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.75-85
• /
• 2004

폐기물 매립장의 침출수를 차수하기 위한 목적으로 다양한 토목섬유들이 폭 넓게 사용되어지고 있다. 이런 토목섬유 사이의 접촉 전단강도는 매립장 바닥차수 시스템 및 종료 매립장 커버 시스템 설계 시 구조물의 안전에 중요한 영향을 주는 설계정수임이 틀림이 없다. 본 연구에서는 폐기물 매립장 설계 시 중요한 설계정수인 토목섬유(지오멤브레인과 지오텍스타일 또는 토목섬유 점토 차수재) 사이의 접촉 전단강도를 산정하기 위하여 대형 직접전단 시험을 수행하였다. 특히, 대부분의 토목섬유가 강우, 침출수 및 지하수에 쉽게 영향을 받기 때문에 토목섬유의 접촉 전단강도에 대한 함수비의 영향을 고려한 연구를 수행하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.659-664
• /
• 2002

New design method about the spread footing was developed using only soil and geosynthetics. This footing will be able to replace the concrete footing at constructing the foundation of small structures. As shown in Fig-3(b), after excavating the ground in semicircular shape, geosynthetics is layed on the semicircular shape of ground and let the soil filled. Geosynthetics of upper side are fixed tightly each other It can be thought to be a kind of great bag with semicircular shape. We performed two kinds of experiments to investigate the deformation and the failure shape of spread footing reinforced by geosynthetics. First, after making model ground with aluminium rods, the lattice point of 1cm ${\times}$ 1cm size of the side of aluminium rods have been painted with various kinds of colors. We have observed the movement of painted rods during loading. Second, we have taken pictures about failure process using B-shutter method. Analysing the behavior of model ground reinforced in a semicircular shape, we could know the reinforced one has much greater and wider plastic area than unreinforced one at failure. Based on the experimental results, new design method was proposed, which has a possibility to apply at the field works.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.321-328
• /
• 2002

Various geosynthetics used as liners or the Protection layers are installed in the solid waste landfill. The interface shear strength between geosynthetics installed at the slope of the landfill is a very important variable for the safe design of bottom and cover systems in the solid waste landfill. The interface shear strengths between (1) Geomembrane(GM)/Geotexile(GT) and (2) Geomembrane(GM)/Geosynthetic Clay Liner(GCL) were estimated by a large direct shear test in this study and were evaluated by the Mohr-Coulomb failure criterion. Especially, this research is focused on the effect of water which exists between geosynthetics because interfaces become easily wet or hydrated by rain, leachate and groundwater beneath liners. The strength reduction at large displacement and the effects of the magnitude of normal stresses and GCL hydration methods also investigated. The test results showed that the interface shear strength and shear behavior varied depending upon the magnitude of normal stresses, water at the interface, and hydration methods. Summary of secant friction angles, which could be used as reference values at a site where similar geosynthetics are installed, together with normal stress and hydration condition are presented.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.106-114
• /
• 2006

본 연구에서는 블록형 보강토 옹벽에 경사계, 침하계, 토압계, 수직 및 수형 변위계, 스트레인게이지 등의 각종 계측기를 매설하여 시공 중 및 시공 후의 보강토 옹벽의거동과 전면벽체에 작용하는 수평토압의 크기 및 분포형태. 그리드에 발현되는 변형 형태 및 인장력의 크기와 침하특성 등을 옹벽의 직선부와 곡선부로 구분하여 분석하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.179-182
• /
• 2002

Geosynthetics are widely used in landfill for filtration, drainage, separation and so on. For many landfill failure cases, interfaces of geosynthetics can be potential failure surfaces. Therefore, it is very Important to estimate the interface properties of geosynthetics. In this study, shaking table tests were peformed between smooth geomembrane and geotextile. From the test results, it was found that there is a limited acceleration that can be transmitted from smooth geomembrane to geotextile. And the influence of normal stress and frequencies of excitation were discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.157-168
• /
• 1999

Geosynthetics are commonly used for filtering, layer separations, drainages, cutoffs, and reinforcements. In highway constructions, geotextile mats have been used for the purposes of vehicle trafficability, separations and embankment reinforcements. Geosynthetics are utilized as prefabricated vertical drains and also used as horizontal drainage layers substituted for the sand mat. Geogrids, essential element of reinforced retaining walls, are sometimes spread under the highway pavement. Besides various usage mentioned above, many type of them are also used as drainage of backfill in culverts and bridge abutments. In this paper, problems of specifications and regulations concerning mostly used geotextiles are specifically dealt with from the practical aspects of field engineering and efforts are given upon improvement of them. Especially, relevant sections of "Standard Specifications for the Highway Construction by Korea Highway Corporation"are being revised and these are introduced in detail.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.11-20
• /
• 1999

The method which makes the soft ground reinforced by using the geogrid, a kind of geosynthetics has been getting popular and its usefulness also has been increased due to reduction in costs, ease of construction and great exterior view, But the study on the frictional characteristics, which is the important factor in design, between reinforcement and soil is insufficient. In this study, compaction degrees were considered through large-scale pullout tests. As a part of studying on estimation of pullout frictional characteristics between soil and geosynthetics, pullout tests were peformed and from the result of pullout tests, pullout frictional parameters between soil and geosynthetics were obtained and pullout behaviors were learned.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.222-232
• /
• 2009

In this study, the real site test conditions were considered and applied to suggest the improved test method for geosynthetics chemical resistance. For this, index and performance tests were done to specify and regulate the more approached test method. Accelerated model by Arrhenius equation was applied to interpretate the experimental data. Through analysis and comparison the overall experimental results, we could suggest the possibility and setup the advanced chemical resistance test method for geosynthetics.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 토목섬유 학술발표회 논문집
• /
• pp.95-104
• /
• 1998

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.291-299
• /
• 2003

본 연구에서는, 토목섬유의 크리프시험시 온도 및 토목섬유에 가해지는 구속응력을 제어할 수 있도록 고안된 온도제어 구속크리프시험(Temperature Dependent Confined Creep Test)을 수행하였다. 시험결과를 토대로, 시험온도 및 구속응력의 크기가 토목섬유의 크리프특성에 미치는 영향을 정량적으로 분석하였으며, 장기적인 크리프변위를 예측하기 위하여 시간-온도 중첩원리를 이용한 합성곡선을 작도하여, 1$\times$$10^7$min.(Geomembrane D)∼1$\times$$10^{10}$min.(Geogrid T)까지의 크리프변위를 예측하였다. 본 합성곡선에 의해, 토목섬유에 가해지는 구속하중에 따른 토목섬유의 이동계수(shift factor)를 도출하였다. 온도제어 구속크리프시험은 시트형 지오그리드와 지오멤브레인을 대상으로 하였으며, 시험온도는 5∼4$0^{\circ}C$의 범위로, 구속하중의 크기는 0∼9t/$cm^2$의 범위로 하였다.