• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.258-261
• /
• 2000

Geophysical surveys (electrical resistivity, self-potential, and magnetic methods) and streamwater sample analysis have been carried out at a site of tailings of waste deposits in an abandoned mine, Jangpoong, which is situated in Kowesan-Gun, Chungbuk-Do. The research was aimed at investigating the suitability of the various geophysical methods for detection of AMD (acid mine drainage) paths, and ultimately mapping of preferred AMD flow channels by incorporating the water sample analysis. Electrical resistivity section from the dipole-dipole line represents the low-resistivity zone trending northwest toward the stream nearby. The positions of the resistivity anomalies for AMD channels are well correlated to the ones from the various geophysical surveys. In addition they correspond to the sites of the higher peaks for the pH, EC, heavy metal content for the water sample data.

• 지구물리와물리탐사
• /
• 제22권3호
• /
• pp.132-148
• /
• 2019

최근 안전 및 환경 등이 사회의 주요 이슈가 되고 있다. 특히 공사 현장 주변의 지반 침하 등에 따른 피해를 막기 위해 지하안전특별법까지 제정되는 등 안전에 대해서는 구체적인 노력이 진행되어 왔다. 환경 오염문제와 관련해서도 대상 지역의 지중유체 이동경로 파악 등을 통해 가능한 환경 오염 영역을 특성화 하고 지중에서 오염의 처리 및 모니터링에 대한 연구가 진행되고 있다. 이러한 연구의 일환으로, 기존에는 주로 자원 탐사, 지질 특성 파악, 지반 탐사 등에 이용되었던 물리탐사 기법이 환경 오염 영역 파악에 적용되고 있다. 이 논문에서는 환경 오염 지역 특성화를 위한 물리탐사 연구의 기초 연구로서, 유류, 침출수, 중금속 및 질소산화물 등 여러 오염원의 특성에 따른 오염지역의 전기적 물성 변화 특성을 알아보았다. 또한 이러한 물성 변화를 파악할 수 있는 물리탐사 기법들 즉, 전기비저항 탐사, 유도분극 탐사, 지표투과레이더 탐사 등의 오염 탐사 적용 가능성에 대해 검토한 후, 다양한 오염지역에서의 실제 수행된 물리탐사 사례들을 분석하였다.

• 자원환경지질
• /
• 제33권4호
• /
• pp.283-293
• /
• 2000

A set of geophysical survey results over an area in Bookil-myun, Chungwon-Gun, Chungcheongbuk-Do is presented; resistivity logging, d.c. sounding, dipole-dipole resistivity, and controlled-source magnetotelluric (CSMT) surveys. These surveys were chosen in this research for the estimation of the basement depth and the delineation of the hydrogeologic structure over the survey area. The results provide an optimal input to a hydrogeologic modeling analysis using the strategies built in GIS software. A total of 14 lines of dipole-dipole resistivity surveys, 25 stations of d.c. sounding and 6 stations of CSMT sounding were performed. In addition 10 boreholes were chosen for resistivity logging to correlate the logs to the surface data. A quantitative information on the hydrogeologic structure over the area is provided by synthesizing the results from various geophysical data and attribute layers are constructed by utilizing a GIS software Arc/ Info. The constructed layers match well to the hydrogeologic structures, which were outlined from the drilling data. The methodology tested and adopted in this study would be useful for providing a more reliable input to the hydrogeologic model setup.

• 지질공학
• /
• 제27권3호
• /
• pp.305-312
• /
• 2017

The most effective way to distinguish subsurface interfaces that produce various geophysical responses is through the integration of multiple geophysical methods, with each method detecting both a complementary and unique set of distinct physical properties relating to the subsurface. In this study, shallow seismic reflection (SSR) and ground penetrating radar (GPR) surveys were conducted at the Cheongju-Gadeok site of the Korea National Groundwater Monitoring Network to map the water table, which was measured at 12 m depth during the geophysical surveys. The water table proved to be a good target reflector in both datasets, as the abrupt transition from the overlying unsaturated weathered rock to the underlying saturated weathered rock yielded large acoustic impedance and dielectric constant contrasts. The two datasets were depth converted and integrated into a single section, with the SSR and GPR surveys conducted to ensure subsurface imaging at approximately the same wavelength. The GPR data provided detailed information on the upper ~15 m of the section, whereas the SSR data imaged structures at depths of 10-45 m. The integrated section thus captured the full depth coverage of the sandy clay, water table, weathered rock, soft rock, and hard rock structures, which correlated well with local drillcore and water table observations. Incorporation of these two geophysical datasets yielded a synthetic section that resembled a simplified aquifer model, with the best-fitting seismic velocity, dielectric constant, and porosity of the saturated weathered layer being $v_{seismic}=1000m/s$, ${\varepsilon}_r=16$, and ${\phi}=0.32$, respectively.

• 지구물리
• /
• 제6권3호
• /
• pp.165-177
• /
• 2003

필댐의 안정성 해석에 있어서 누수와 내부침식은 매우 중요한 평가의 한 부분이다 연구대상 지역의 필댐은 내부침식으로 추정되는 댐 상부의 공동발생 및 과대 누수량으로 문제가 발생하여, CGS(compaction grouting system)으로 보강공사를 수행하였으며, 본 보강방법은 주입재료 및 주입압력이 중요한 변수로 작용을 한다. 본 연구에서는 CGS 보강이 필댐의 안정성에 미치는 영향을 CGS보강 전후에 지구물리탐사를 수행하여 해석하였다. 본 조사에 적용된 방법에는 전기비저항탐사, 탄성파 굴절법탐사, GPR탐사, HFMT탐사 등이 적용되었다. 조사결과 CGS 보강으로 댐의 전제척인 거동에 많은 영향을 준 것으로 나타났으며, 주입압력이 과대하여 댐 중심코아에 많은 변위가 발생된 것을 확인할 수 있었다.

• 지구물리와물리탐사
• /
• 제8권1호
• /
• pp.92-96
• /
• 2005

한반도 남서쪽에 위치한 산동저수지에 대하여 저수지 누수문제 파악을 위해 다양한 수리지질학적 방법과 지구물리 방법이 적용되었다. 이 연구에서 적용한 방법은 추적자 시험, 배수에 따른 시추공 수위 변화 및 누수량 변화 측정, 쌍극자배열 전기비저항탐사, 온도 검층 및 자연전위법 등이다. 수리지질학적 방법 적용 결과 누수형태는 댐체 측벽부를 통한 누수로 밝혀졌으며, 지구물리 방법 적용 결과 이러한 누수구간 및 누수로가 확인되었다. 또한 연구결과로서 지구물리방법 중 전기비저항탐사는 누수구간 규명에 효과적이며, 유동전위를 대상으로 한 자연전위법은 누수 지점 및 누수 유로 확인에 매우 높은 적용성을 확인하였다. 특히 자연번위법 적용 결과 누수가 합쳐져 유출되는 지점 근처에서 측정된 자연전위가 상대적으로 강한 음의 값을 나타냄에 따라 누수량의 증가와 자연전위값의 변화는 상관성이 큰 것으로 나타났다.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.93-98
• /
• 2004

The sand-covered Muweilah archaeological site in the United Arab Emirates (UAE) is a unique Iron Age site, and has been subject to intensive investigations. However, excavations are time consuming and may require twenty years to complete. Thus geophysical surveys were undertaken with the objective of characterising the site more expeditiously. This paper presents preliminary results of these surveys. Ground penetrating radar (GPR) was tested as a primary imaging tool, with an ancillary shallow time domain EM (MetalMapper) system. Dense 3D GPR datasets were migrated to produce horizontal (plan view) depth slices at 10 cm intervals, which is conceptually similar to the archaeologists' excavation methodology. The objective was to map all features associated with anthropogenic activity. This required delineating extensive linear and planar features, which could represent infrastructure. The correlation between these and isolated point reflectors, which could indicate anthropogenic activity, was then assessed. Finally, MetalMapper images were used to discriminate between metallic and non-metallic scatterers. The moderately resistive sand cover allowed GPR depth penetration of up to 5 m with a 500 MHz system. GPR successfully mapped floor levels, walls, and isolated anthropogenic activity, but crumbling walls were difficult to track in some cases. From this study, two possible courtyard areas were recognised. The MetalMapper was less successful because of its limited depth penetration of 50 cm. Despite this, the system was still useful in detecting modem-day ferruginous waste and bronze artefacts. The results (subject to ongoing ground-truthing) indicated that GPR was optimal for sites like Muweilah, which are buried under a few metres of sand. The 3D survey methodology proved essential to achieve line-to-line correlation for tracking walls. In performing the surveys, a significant improvement in data quality ensued when survey areas were flattened and de-vegetated. Although MetalMapper surveys were not as useful, they certainly indicated the value of including other geophysical data to constrain interpretation of complex GPR features.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.281-287
• /
• 2003

A Natural cavities were found at shallow depth during construction of a huge bridge in Moon-Kyung, Korea. The distribution patterns of cavities in the Moon-Kyung limestone were investigated carefully with a supplementary field job such as a structural geological survey, a geophysical survey, and a rock mechanical test in laboratory or field. A structural geological mapping produced a detail geological map on this area. It suggested that there were three faults in this area, and these faults had an influence on the mechanism of natural cavities. Among many kinds of geophysical surveys, an electrical resistivity prospecting was applied firstly on the specific area that was selected by results from the geological survey. Many evidences for cavities were disclosed from this geophysical data. Therefore, a seismic tomography was tested on the target area, which was focused by results from the electrical resistivity prospecting and was believed to have several large cavities. A distinct element numerical simulation using the UDEC was followed on the target area after completing all of field surveys. Data from field tests were directly dumped or extrapolated to numerical simulations as input data. It was verified from numerical analysis that several natural cavities underneath the foundation of the bridge should be reinforced. Based on the project result, finally, most of foundations for the bridge were re-examined and the cement grouting reinforcement was constructed on several foundations among them.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.219-224
• /
• 2007

We conducted geophysical surveys to detect antitank mine at Namji-eup, Gyeongsangnam-do which had been installed during Korean war. The surveys consisted of 2 stages, at the first stage we divided the survey area into 7 block and carried out magnetic gradient survey and GEM-3 EM survey sequentially for each block. Hence we verified anomaly areas using an excavator and a metal detector. Most of anomalies were found to be garbages such as trash cans, metallic wastes, and so on. And also, the concrete pipe was found at depth of 1 m, which had not referred in any report of that area. At the second stage, after trenching the covered soil down to 75 cm the same surveys were conducted. We could not find the strong signal to be inferred from a antitank mine, but we pointed out some anomalies to need careful handling because demining is very dangerous work even though there is few possibility that is mine.

• 자원환경지질
• /
• 제36권6호
• /
• pp.501-510
• /
• 2003

충남 부여의 임천 폐광산의 지하갱도와 폐광석 적치장의 인공차수막의 차수효과를 탐지하기 위해 각종 지구물리탐사 (전기비저항, 전자탐사, 탄성파굴절법, 지반투과레이다)를 실시하였다. 탄성파굴절법탐사 역산결과 주요 굴절면의 속도는 1000m/s 이하, 1000∼2000m/s, 2000m/s 이상의 3개 층으로 구분되며, 이중에서 2000m/s 이상의 속도를 갖는 기반암은 주로 7.5-10m사이에 분포하는 것으로 나타났다. 전기비저항탐사자료에서 수만∼수십만 ohm-m의 높은 전기비저항값은 지하갱도에 의한 효과로 해석된다. 또한 폐광석 적치장의 산성광산배수 발생을 억제하기 위해 설치한 인공차수막은 지반투과레이다탐사에서 0.5∼0.7m 사이에서 일관적으로 나타나는 이벤트와 대비되는데 이것은 전기비저항탐사 결과에서는 전극간격의 분해능을 고려할 때 천부 2m 이내에서 연속적으로 나타나는 고비저항 이상대와 관련된 것으로 해석된다. 전기비저항탐사와 전자탐사 결과 특정구간에서 낮은 전기비저항과 높은 전기전도도 값은 지표수의 침수 또는 인공차수막의 차수효과가 일부 저하된 것으로 해석된다.