• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.438-445
• /
• 2007

액체로켓엔진에서 발생하는 고주파 연소 불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여, 선형 음향 해석 및 상온 음향 실험을 통해 감쇠 효과의 적합성을 검증하였다. 단일 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여 오리피스 직경, 길이를 변화시킨 몇 가지 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 다음으로 음향공의 개수에 따른 음향 감쇠 효과를 비교하였다. 주파수 응답함수를 통한 유해주파수 감쇠 성능은 개수 증가에 따라서 우수해졌지만 흡음계수를 통한 최적의 효율 관점에서 볼 때 오히려 과도한 댐핑으로 인한 해당 주파수의 감쇠 효율이 낮아지는 경향이 발생한다. 결론적으로 음향공을 이용한 제어를 위해서는 유해주파수를 감쇠시킬 수 있는 기하학적 형상을 통한 정확한 동조가 필요하다. 또한, 부피의 제약을 고려한 최적의 효율을 발휘할 수 있는 음향공의 형상 설계와 개수의 선택이 절대적으로 필요함을 입증한다.

• Journal of Communications and Networks
• /
• 제17권1호
• /
• pp.47-57
• /
• 2015

With the ever growing demand of data applications, the joint macro-relay networks are emerging as a promising heterogeneous deployment to provide coverage extension and throughput enhancement. However, the current cellular networks are usually designed to be performance-oriented without enough considerations on the traffic variation, causing substantial energy waste. In this paper, we consider a joint macro-relay network with densely deployed relay stations (RSs), where the traffic load varies in both time and spatial domains. An energy-efficient scheme is proposed to dynamically adjust the RS working modes (active or sleeping) according to the traffic variations, which is called traffic-aware relay sleep control (TRSC). To evaluate the performance of TRSC,we establish an analytical model using stochastic geometry theory and derive explicit expressions of coverage probability, mean achievable rate and network energy efficiency (NEE). Simulation results demonstrate that the derived analytic results are reasonable and the proposed TRSC can significantly improve the NEE when the network traffic varies dynamically.

• 항공우주기술
• /
• 제6권2호
• /
• pp.197-204
• /
• 2007

터번로터 팁 형상의 변화에 따른 터보펌프 터빈의 성능변화에 대하여 실험적 연구를 수행하였다. 한국항공우주연구원에서 개발중인 30톤급 터보펌프용에 장착된 초음속 충동형 터빈을 기본 모델로 하여 터번로터 슈라우드 유무 및 팁간극 크기에 따른 터빈성능변화를 측정 비교하였으며, 이와 더불어 노즐-로터 오버랩에 따른 터빈성능 변화 연구도 함께 이루어졌다. 시험 수행 결과, 로터 슈라우드 유무에 따라 터빈성능의 절대량은 크게 변화하나 팁간극의 변화에 따른 터빈효율의 민감도는 초음속 충동형 터빈의 경우 고효율 아음속터빈에 비해 크게 작은 것으로 나타났다. 아울러, 최적 효율을 나타내는 노즐-로터 오버랩 값이 존재하는 것을 실험을 통해 확인하였다.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.37-41
• /
• 2012

High-efficiency and low-noise axial flow fan is developed by combining the FanDAS, a computerized axial fan design/performance analysis system, and CFD software(CFX). Based on fan design requirements, FanDAS conducts 3-D blade geometry design, quasi-3D flow/ performance analyses and noise evaluation by using through-flow analysis method and noise models for discrete frequency and broadband noise sources. Through the parametric studies of fan design variables using FandDAS, preliminary and baseline design is achieved for high efficiency and low noise fan, and then can be coupled with a CFD technique such as the CFX code for constructing final and optimized fan design. The FanDAS-CFX coupled system and its design procedure are applied to actual fan development practice. The FanDAS provides an optimized 3-D fan blade geometry, and its predictions on the performance and the noise level of designed fan are well agreed with actual test results.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.43-49
• /
• 2001

When designing a gerotor, designers determine basic dimensions of a gerotor with transmitted power considering strength, interference and so. on. But, designers can not easily obtain the tooth profile generated by dimensions as well as the geometry bob for cutting the tooth profile. In order to resolve these problems, an automatic design sys-tem creating not only the solid model of a gerotor but also that of the generating hob using the design parameters of dimen-sions is developed. Through the developed system, designers can improve the efficiency of design and satisfy the variable requirements of design as well. In this research, the three-dimensional solid models for gerotors are generated considering the design parameters. Besides, those for generating hob regarding the design parameters of hob is created automatically.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.97-103
• /
• 1997

A modified Delaunay triangulation technique is tested for complicated computational domain. While a simple geometry. both in topology and geometry, has been well discretized into triangular elements, a complex geometry having difficulty in triangulation had to be divided into small sub-domains of simpler shape. The present study presents a modified Delaunay triangulation method based on the data structure of geometric modeller. This approach greatly enhances the reliability of triangulation, especially in complicated computational domain. We have shown that efficiency of Delaunay triangulation can be much improved by using both the GUI (Graphic User Interface) and OOP (Object-Oriented Programming).

• 산업기술연구
• /
• 제15권
• /
• pp.153-168
• /
• 1995

The purpose of this study is to develop a method for predicting the aerodynamic performance of the subsonic airfoils in the 2-dimensional, steady and viscous flow. For this study, the airfoil geometry is specified by adopting the longest chord line system and by considering local surface curvature. In case of the inviscid-incompressible flow, the analysis is accomplished by the linearly varying strength vortex panel method and the Karman-Tsien correction law is applied for the inviscid-compressible flow analysis. The Goradia's integral method and the Truckenbrodt integral method are adopted for the boundary layer analysis of the laminar flow and the turbulent flow respectively. Viscous and inviscid solutions are converged by the Lockheed iterative calculating method using the equivalent airfoil geometry. And the analysis of the seperated flow is performed using the Dvorak and Maskew's method as the basic method. The wake effect is also considered and its geometry expressed by the formula of Summey & Smith when no seperation occurs. A computational efficiency is verified by the comparison of the computational results with experimental data and by the shorter execution time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.745-746
• /
• 2006

In this paper, we propose a new predictive coding scheme for color data of three-dimensional (3-D) mesh models. We exploit connectivity and geometry information to improve coding efficiency. After ordering all vertices in a 3-D mesh model with a vertex traversal technique, we employ a geometry predictor to compress the color data. The predicted color can be acquired by a weighted sum of reconstructed colors for adjacent vertices using both angles and distances between the current vertex and adjacent vertices.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권7호
• /
• pp.462-467
• /
• 2000

In general, when geometry and current distribution have a periodic or symmetric property, the analysis of a part model is sufficient to represent that of a whole model by using the periodic boundary condition. It is impossible, however, to apply the periodic boundary condition when the current distribution is not symmetric even if the geometry of the model is symmetric. In this paper, a novel technique to resolve this problem is proposed. Even when the geometry is symmetric and the current distribution is not, the proposed method enables that calculation time for a whole model is reduced to that for a part model. The proposed method is applied to a deflection yoke (DY), and validness and efficiency of the method are verified.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1421-1430
• /
• 2022

The computation of the solid angle and the detector efficiency is considering to be one of the most important factors during the measuring process for the radioactivity, especially the cylindrical γ-ray NaI(Tl) detectors nowadays have applications in several fields such as industry, hazardous for health, the gamma-ray radiation detectors grow to be the main essential instruments in radiation protection sector. In the present work, a generic numerical simulation method (NSM) for calculating the efficiency of the γ-ray spectrometry setup is established. The formulas are suitable for any type of source-to-detector shape and can be valuable to determine the full-energy peak and the total efficiencies and P/T ratio of cylindrical γ-ray NaI(Tl) detector setup concerning the truncated conical radioactive source. This methodology is based on estimate the path length of γ-ray radiation inside the detector active medium, inside the source itself, and the self-attenuation correction factors, which typically use to correct the sample attenuation of the original geometry source. The calculations can be completed in general by using extra reasonable and complicate analytical and numerical techniques than the standard models; especially the effective solid angle, and the detector efficiency have to be calculated in case of the truncated conical radioactive source studied condition. Moreover, the (NSM) can be used for the straight calculations of the γ-ray detector efficiency after the computation of improvement that need in the case of γ-γ coincidence summing (CS). The (NSM) confirmation of the development created by the efficiency transfer method has been achieved by comparing the results of the measuring truncated conical radioactive source with certified nuclide activities with the γ-ray NaI(Tl) detector, and a good agreement was obtained after corrections of (CS). The methodology can be unlimited to find the theoretical efficiencies and modifications equivalent to any geometry by essential sufficiently the physical selective considered situation.