• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권7_8호
• /
• pp.773-779
• /
• 2003

얼굴 영역의 정확한 위치를 정확히 찾는 것은 얼굴 인식을 위한 핵심적인 전처리 과정이다. 본 논문에서는 조명조건, 표정, 배경의 변화에 무관하게 얼굴의 구성요소를 검출할 수 있는 강건한 기법을 제안한다. 수평 방향의 상대적으로 어두운 화소값을 갖는 눈썹, 눈, 입 둥과 같은 독립된 얼굴 요소를 검출하기 위해 형상 분해 국부 최적 임계치 기법을 적용하며 얼굴을 구성하는 간단한 기하학적 조건을 만족하는 얼굴 요소의 그룹을 검색함으로써 순수 얼굴영역을 검출한다. AR-face 데이타베이스의 영상에 적용한 결과, 두꺼운 안경테에 의해 눈썹이 가리워진 특수한 경우를 제외한 거의 모든 영상에 대해 정확한 얼굴 영역을 검출할 수 있었고, 얼굴의 대칭성을 이용해 회전과 이동 변화를 보상할 수 있으므로 강건한 얼굴 인식의 전처리 과정으로 사용할 수 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.25-29
• /
• 2005

Axial fan is used for the supplement of large amount of flows. Axial blowers show relatively high efficiency of the system. The present model of axial fan is for cooling a condenser in an air-conditioning unit that exhibits tendency toward compact size. In order to realize the compact model, the width of an axial blade should be cut down in axial distance. Main interest lies on the performance of the axial blowing system with blades having shorter chord length. One of the important design parameters for axial fan is the shape of the blades of it. Design of blades includes the cross-sectional shape and its dimension, including the chord length. We consider two types of blades; one is NACA airfoil with normal chord length and the other is with shortening chord length by $10\%$ of normal airfoil. Axial blower with the modified blades is essential for the compact model of an air-conditioner. The other design parameters are same in the two cases. Using a wind tunnel follows ASHRAE standards carries out evaluation of performance of the system. Detail of flows around the blades is prepared by velocity measurements using PIV. According to performance estimation, the axial blower with short chord blade show quite close to the performance results, including flow rate and pressure rise, of the standard one. The reason of the two similar results is that the flowpatterns depend on Reynolds number based on the chord length of a blade. In this investigation, the critical chord length is found, in which the flows near the airfoil are so unstable and the performance of the system is decreased. A series of figures is for the detail information on the flow.

• 패션비즈니스
• /
• 제18권2호
• /
• pp.148-165
• /
• 2014

The purpose of this study is to establish a theory about the necessary structure for knitwear design, and to propose it with the practical data through the actual development of a high value added knit structure. For this study, the market was conducted along with literature reviews on the existing studies and the relevant books about knit structures. The market research aimed at the products released in the spring/summer and fall/winter seasons of 2012-2013, focusing on brand for middle aged women. The utilization of the structure by item and the characteristics of knit design were studied. The research was conducted on S/S products in May and July, and F/W products in October and December. As a result of the market research, it was shown that the lightweight structures with permeability such as plain, lace, links and links, this is repeated and rib structure were frequently utilized during the S/S season, while double structures with good shape stability were greatly utilized during the F/W season. Also, during the F/W season, a cable structure and tubular jacquard that emphasized the volume or cubic effect were frequently used, and there were many jacquard structures where a change of color sense and motive were added. Concerning the knit structures development, the researcher designed the knit structure at the actual production site of the knit fashion. A total of 5 pieces of knit structures were developed by asking a professional for programming and knitting. To the developed structures, the study added a multi-gauged effect, herringbone transformation effect, 3-dimensional surface effect, color effects, geometric patterns, lace penetration effect, and soft surface effect in a water-drop shape. In addition, the structures had differences in the added values by mixing various structures and diversely expressing color sense on the knitting line. This study proposes the direction for 21st century knitwear product design, through the development of a high value added knit structure.

• 한국차세대컴퓨팅학회논문지
• /
• 제15권4호
• /
• pp.40-50
• /
• 2019

최근에는 증강 현실 기술과 가상 현실 기술이 사용되는 의료 영상 분야에서 Low-end 시스템에 대한 정확한 인체 모델을 시각화하는 것이 중요하다. 모델의 기하구조를 줄이면 원래 모양과 다른 점이 나타나고 그 차이를 오류로 간주한다. 따라서 기하구조를 축소하면서 오류를 최소화해야 한다. 본 연구에서는 CT 나 MRI 등의 단층 영상에서 인체 장기에 해당하는 영역을 분할하여 3 차원 기하학적 모델을 생성함으로써 다중 해상도의 상세 단계 모델의 재구성 방법을 구현했다. 실험에서 가상 현실 플랫폼은 척추 영역을 재구성한 모델의 모양을 검증하기 위해 구축되었다. 가상 현실 플랫폼을 이용하여 3D 인체 모델과 환자 정보를 확인할 수 있다.

• East Asian mathematical journal
• /
• 제32권4호
• /
• pp.483-500
• /
• 2016

Ancient Greek mathematician Euclid left three books about mathematics. It's 'The elements', 'The data', 'On divisions of figure'. This study is based on the analysis of Euclid's 'On divisions of figure'. 'On divisions of figure' is a book about the construction of the shape. Because, there are thirty six proposition in 'On divisions of figure', among them 30 proposition are for the construction. In this study, based on the 'On divisions of figure' we explore the direction for construction education. The results were as follows. First, the proposition of 'On divisions of figure' shall include the following information. It is a 'proposition presented', 'heuristic approach to the construction process', 'specifically drawn presenting', 'proof process'. Therefore, the content of textbooks needs a qualitative improvement in this way. Second, a conceptual basis of 'On divisions of figure' is 'The elements'. 'The elements' includes the construction propositions 25%. However, the geometric constructions contents in middle school area is only 3%. Therefore, it is necessary to expand the learning of construction in the our country mathematics curriculum.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.234.2-234.2
• /
• 2015

Recently, the electromagnetically-induced transparency (EIT)-like effect in metamaterials has attracted enormous interest. Metamaterial analogs of EIT enable promising applications in slow-light devices, low-loss metamaterial, quantum optics, and novel sensors. In this work, we experimentally and numerically studied a bilayer metamaterial for controllable EIT-like spectral response at microwave frequencies. Bilayer metamaterial consists of two snake-shape resonators (SSRs) with one and two bars. The transmission spectra were measured in a frequency range of 4 - 8 GHz in an anechoic chamber at normal incidence. It is found that two SSRs in the metamaterial are activated in bright modes, and the coupling between two bright modes leads to the EIT-like effect, which results in the enhanced transmission at 5.61 GHz. Furthermore, we confirm that the EIT-like feature could be controlled by adjusting the geometric parameters of metamaterial structure. Our work provides a way to tunable EIT-like effect and various potential applications including filters, sensors, and other microwave devices.

• 에너지공학
• /
• 제13권1호
• /
• pp.34-39
• /
• 2004

본 논문에서는 압축공기를 작동매체로 한 저압용 보텍스튜브에 대한 에너지 분리과정을 상세히 연구하였다 먼저 보텍스튜브에서 에너지 분리되어 나오는 온공기와 냉공기의 온도변화에 대하여 실험하였고, 보텍스튜브의 안쪽표면의 최대벽면온도 변화와 보텍스튜브 내의 온도분포를 통하여 보텍스튜브 내 유동장에서의 정체점의 위치에 대한 유용한 정보를 얻게 되었다. 이를 바탕으로 보텍스튜브의 노즐면적비와, 오리피스의 크기에 따른 에너지분리 과정 등을 실험을 통하여 알아보았다. 이러한 기하학적 형상의 변화실험을 통하여 저압용？대형 보텍스튜브의 에너지 분리과정이 고압형\ulcorner소형 보텍스튜브 보다 에너지 분리효과가 증대됨으로 인하여 최적의 노즐면적비와 오리피스지름비가 차이가 있음을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.785-798
• /
• 2002

A reliable analytic model that predicts the surface profile of the exit cross section of workpiece in round-oval (or oval-round) pass sequence is established. The presented model does not require any plasticity theory but needs the only geometric information on workpiece and roll groove. Formulation is based on the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groove in the roll axis direction when the maximum spread of workpiece is known beforehand. The validity of the analytic model is examined by hot rod rolling experiment with the roll gap, specimen size, design parameter of oval groove and steel grade changed. Results revealed that the cross sectional shapes predicted by the model were in good agreement with those obtained experimentally. We found that the analytic model not only has simplicity and accuracy for practical usage but also saves a large amount of computational time in comparison with finite element method.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.761-769
• /
• 2008

The majority of mechanical parts are manufactured by milling machines. Hence, geometrically efficient algorithms for tool path generation and physical considerations for better machining productivity with guarantee of machining safety are the most important issues in milling tasks. In this paper, an optimized path generation algorithm for direction parallel milling which is commonly used in the roughing stage is presented. First of all, a geometrically efficient tool path generation algorithm using an intersection points-graph is introduced. Although the direction parallel tool path obtained from geometric information have been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In order to cope with these problems, an optimized tool path, which maintains constant MRR in order to achieve constant cutting forces and to avoid chatter vibrations at all time, is introduced and the result is verified. Additional tool path segments are appended to the basic tool path by using a pixel based simulation technique. The algorithm has been implemented for two dimensional contiguous end milling operations, and cutting tests are conducted by measuring spindle current, which reflects machining situations, to verify the significance of the proposed method.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2235-2245
• /
• 2000

The necessity of using rapid prototyping(RP) for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy, materials, aid cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed. For the new hybrid RP process to maintain the same degree of process automation as in currently available processes like SLA or FDNI, a sophisticated process planning system is developed. In the process planner, CAD models(STEP AP203) are partitioned into 3D manufacturable volumes called 'Ueposition feature segment"(DFS) after machining features called "machining feature segmenf'(MFS) are extracted from the initial CAD model. Once MFS and DFS are identified, the process planner arranges them into a chain of processes and automatically generates machining information for each DFS and MFS. The goal of this paper is to present a framework for a process planning system for hybrid RP processes and to outline the geometric algorithms involved in developing such an environment.