• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.158-159
• /
• 2011

Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.321-325
• /
• 2008

Void areas(holes) as an inevitable phenomenon exist in geographic routing of wireless sensor networks, because the unpredictable and harsh nature application environment or uneven energy consumption. Most of the existing schemes for the issue tend to construct a static detour path to bypass a hole. The static detour path may lead to uneven energy consumption of the nodes on the perimeter of the hole; thus it may enlarge the hole. At the same time, traffic would concentrate on the peripheral node of the hole; thus the nodes on the perimeter of the hole tend to be depleted quietly. In previous work, we have proposed a hole geometric model to reduce the energy consumption and packet collisions of the nodes on the hole boundary. This scheme, however, still has the static detour path problem. Therefore, we extend the previous work by constructing a dynamic detour path hole geometric model for wireless sensor networks in this paper. The location of hole detour anchors is dynamically shifted according to Gaussian function, just generating dynamic hole detour paths.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.322-329
• /
• 2009

Many researches in wireless sensor networks have used a geographic routing to effectively disseminate data between sinks and sources. To know the location information, the geographic routing has proposed two manners. A sink-initiated and a source-initiated are flooding to disseminate its location information in WSN. However, these two manners have two problems. Firstly, whenever they move, they flood their location information. Secondly, their location information is disseminated unnecessary nodes besides nodes which send and receive data in actually. Therefore, this paper proposes a protocol that can solve the two problems and disseminate effectively data between few sinks and few sources. The proposed protocol exploits a location information manager that manages location information of the sinks and the sources. We also compare the performance of the proposed protocol with the existing protocols through a simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.712-721
• /
• 2012

In this paper, we propose an Enhanced cross-layer Geographic Forwarding (EGF) protocol for wireless sensor networks (WSNs). EGF uses an optimal back-off time to make the packet forwarding decisions using only source and destination's location information and energy cost without information about neighbor nodes' location or the number of one hop neighbor nodes. EGF is also a cross-layer protocol by combining efficient asynchronous MAC and geographic routing protocol. The proposed protocol can find optimal next hop location quickly without broadcasting node's location update and with minimizing overhead. In our performance evaluation, EGF has better performance in terms of packet success ratio, energy efficiency and end-to-end delay in wireless sensor networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.464-470
• /
• 2011

V2V (Vehicle-to-Vehicle) is a special kind of VANET (Vehicular Ad-hoc Network), which has high mobility and frequent topology changes and causes the link breakage problem. To resolve this problem, geographic routing protocols such as greedy forwarding are proposed. However, the greedy forwarding approach selects the node closest to the destination node as the transfer node within the transmission range so that it may cause many problems owing to many intersections and many changes in vehicular traffic in urban areas. The paper proposes a greedy perimeter urban routing (GPUR) algorithm considering the presence of 2-hop neighbor nodes and the road characteristics. Simulation results using ns-2 reveal that the proposed GPUR algorithm significantly reduces the routing error problem and the probability of local maximum than the existing routing protocols.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.1-6
• /
• 1994

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. In describing a distribution network, we have stated that it is basically a system or a set of locations that, receive or store material plus the routes that connect these locations. Whether the network is spread over some geographic region or is whitin a single facility, the definition remains the same. Implicit in this definition, however, is that both the locations and the transportation between these locations must be considered in any decisions regarding the design of the operation of the overall network. The purpose of this paper is optimal layout using transportation quantity and distance in the total system operation. And we minimize the sum of load-carrier costs and spur costs in this flow network.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.127-128
• /
• 2009

위치기반 라우팅 프로토콜에서의 기본 가정인 이웃 노드들과의 주기적인 위치정보 교환은 노드의 이동성이 있는 경우, 그 성공률을 보장하기가 어렵다. GPSR[1]에서 제안하고 있는 1-홉 거리에 있는 노드들의 정보를 테이블로 관리하는 방식은 데이터 전달이 없는 지역에서도 주기적인 비콘의 교환으로 불필요한 에너지 소모가 있으며, 노드들의 위치가 변경되었을 때, 비콘 (beacon)을 수신한 시점의 위치정보와 데이터 전달시점의 위치정보의 불일치 가능성을 배제할 수 없다. 따라서, 본 논문에서는 노드의 이동성이 빈번한 환경의 위치기반 라우팅 프로토콜에서 데이터전달시점에 이웃 노드들의 정보를 바탕으로 다음 전송노드를 선택하는 방법을 제안한다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.849-851
• /
• 2003

A location-based service or LBS in a cellular telephone network is a service provided to the subscriber based on his current geographic location. This position can be known by user entry or a GPS receiver that he carries with him, but most often the term implies the use of a function built into the cell network that uses the known geographic coordinates of the base stations through which the communication takes place. One implication is that knowledge of the coordinates is owned and controlled by the network operator, and not by the end user. Location utility service provides two kinds of functions, geocoder and reverse geocoder. Geocoder converts an address into a coordinate and reverse geocoder changes a coordinate into an address. Because location utility service is the first step to progress LBS, various servises such as directory, routing, presentation, and etc require to access that. In this paper, we will describe the architecture of LBS platform and the concept and the role of location utility service.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.249-252
• /
• 2004

The automatic determination of vehicle operation status as well as continuous tracking of vehicle location with intelligent management is one of major elements to achieve the goals. Especially, vehicle operation status can only be analyzed in terms of expert experiences with real-time location data with scheduling information. However the scheduling information of individual vehicle is very difficult to be interpreted immediately because there are hundreds of thousand vehicles are run at the same time in the national wide range workplace. In this paper, we propose the location-based knowledge management system(LKMs) using the active trajectory analysis method with routing and scheduling information to cope with the problems. This system uses an inference technology with dispatching and geographic information to generate the logistics knowledge that can be furnished to the manager in the central vehicle monitoring and controlling center.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.187-188
• /
• 2008