• Title/Summary/Keyword: geochemical data

검색결과 256건 처리시간 0.027초

건설 현장에서 안전성 향상을 위한 지반진동.소음.비산먼지 측정자료의 분석에 관한 연구 -영남지역의 퇴적암.화성암층에서의 발파 및 항타작업을 중심으로- (A Study on Data Analysis of Ground Vibration.Noise Dust Dispersion Measurement for Enhancing Safety at the Construction Sites - Focussed on Blasting and Piling in Sedimentary and Igneous Rocks in the Youngnam Area -)

  • 안명석;류창하;박종남
    • 화약ㆍ발파
    • /
    • 제19권3호
    • /
    • pp.91-104
    • /
    • 2001
  • As in Korean environments with mountainous and hilly areas, the rock generally has to be removed in construction or civil engineering work in tunnelling or excavation for development in urban area. Explosives should be used for blasting, which may cause serious problems on local people for their claim for compensation due to ground vibration, noise. For safe and economic blasting, geology and engineering characteristics of rocks such as discontinuities of rock or weathering are very important factors, together with site characteristics for prediction of ground vibration. In this study, conducted were the detailed study for major rocks most widely distributed in the South-east area, in-situ geological survey, geological and geochemical analysis, and further laboratory uniaxial rock stress, seismic velocity of core samples together with in-situ seismic velocity measurements. Regulations on ground vibration and noise were reviewed for assessing their adaptabilities, and a total of 4,856 measured blasting vibration data were examined for enhancing the confidence level in estimating the predictive formulation using scaled distance statistically.

  • PDF

경북청송지역 달기 탄산약수의 지화학적 수질특성과 생성기원 (Geochemical Water Quality and Genesis of Carbonated Dalki Mineral Water in the Chungsong Area, Kungpook)

  • 정찬호
    • 자원환경지질
    • /
    • 제32권5호
    • /
    • pp.455-468
    • /
    • 1999
  • Carbonated mineral waters fo $Ca(Mg)-HCO_3$ type spring out fissure of Jurassic granite in the valley floor of the Chungsong area. The water has been long as a Dalki medicinal water because of its unique therapeutic effect against clacium deficit, stomach and skin troubles, ect. The water has a high $CO_2$ concentration ($P_{CO_2}$=0.51~1.12atm) and exhibits strong pH buffering (5.9~6.26) by $H_2CO_3/HCO_3$ couple. Electrical conductivity ranges from 1,900 to 3100 $\mu$S/cm. Environmental isotopic data $(^{2}H/^{1}H, ^{18}O/^{16}O \;and \;^3H)$ indicates that the water is of meteoric origin recharged in the Cretaceous sedimetary strata distributed in upper part of the catchment area at least before 1950s, The high $P_{co_2}$ and carbon isotope data (${\delta}^{13}C=-3\sim-0.2\textperthousand$) suggest that the potential source of carbonated mineral water was originated in deep-seated $CO_2$ as wel as aboundant carbonate minerals of sedimentary desimetary rocks. The major source minerals of the dissoved species in the carbonated mineral water appear to be carbonate minerals, albite and K-feld-spar in sedimentrary rocks.

  • PDF

Applying 3D U-statistic method for modeling the iron mineralization in Baghak mine, central section of Sangan iron mines

  • Ghannadpour, Seyyed Saeed;Hezarkhani, Ardeshir;Golmohammadi, Abbas
    • Geosystem Engineering
    • /
    • 제21권5호
    • /
    • pp.262-272
    • /
    • 2018
  • The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

Characterization of the Purified Ca-type Bentonil-WRK Montmorillonite and Its Sorption Thermodynamics With Cs(I) and Sr(II)

  • Seonggyu Choi;Bong-Ju Kim;Surin Seo;Jae-Kwang Lee;Jang-Soon Kwon
    • 방사성폐기물학회지
    • /
    • 제21권4호
    • /
    • pp.427-438
    • /
    • 2023
  • Thermodynamic sorption modeling can enhance confidence in assessing and demonstrating the radionuclide sorption phenomena onto various mineral adsorbents. In this work, Ca-montmorillonite was successfully purified from Bentonil-WRK bentonite by performing the sequential physical and chemical treatments, and its geochemical properties were characterized using X-ray diffraction, Brunauer-Emmett-Teller analysis, cesium-saturation method, and controlled continuous acid-base titration. Further, batch experiments were conducted to evaluate the adsorption properties of Cs(I) and Sr(II) onto the homoionic Ca-montmorillonite under ambient conditions, and the diffuse double layer model-based inverse analysis of sorption data was performed to establish the relevant surface reaction models and obtain corresponding thermodynamic constants. Two types of surface reactions were identified as responsible for the sorption of Cs(I) and Sr(II) onto Ca-montmorillonite: cation exchange at interlayer site and complexation with edge silanol functionality. The thermodynamic sorption modeling provides acceptable representations of the experimental data, and the species distributions calculated using the resulting reaction constants accounts for the predominance of cation exchange mechanism of Cs(I) and Sr(II) under the ambient aqueous conditions. The surface complexation of cationic fission products with silanol group slightly facilitates their sorption at pH > 8.

지구화학적 해석을 이용한 하상여과 설계인자에 대한 연구 (Design Parameters of Riverbed Filtration Estimated from Geochemical Data)

  • 조강희;김봉주;안중혁;임기성;최낙철;박천영
    • 지질공학
    • /
    • 제23권4호
    • /
    • pp.493-502
    • /
    • 2013
  • 본 연구는 하천수와 지하수에 대해 지구화학적 해석을 이용하여 하상여과의 설계인자에 대해 조사하였다. 연구지역은 충적층으로 구성되어 있으며, 지표환경의 비점오염원 영향을 쉽게 받을 뿐만 아니라, 하상여과 설계인자에 영향을 미칠 것으로판단된다. 하천흐름에 따라 하천수는 상류, 중류, 하류 3개 시료를 채취하였고, 하천으로부터 거리에 따라 지하수 9개 시료를 각각 채취하였다. 연구지역의 시료에 대한 화학분석자료를 통하여, 산업시설과 농업활동이 일차적인 오염원임을 추정하였다. 또한, 배경수질은 Ca-Na-$HCO_3$, Ca-Cl, Ca-$HCO_3$-Cl 유형을 보인다. 연구지역의 하상여과 설계인자는 K, $HCO_3$, $NO_3$ 및 Cl로 판단된다. 질소안정동위원소를 통해 연구지역은 A, B, C그룹으로 구분되며, A그룹은 하천수의 기원 및 탈질산화반응, B그룹은 지류의 유동방향에 따른 탈질산화작용, C그룹은 인위적인 오염인 자연토양, 생활하수유래의 질산성질소로 판단된다.

경주-감포 일대 화강암체의 악석학적 연구 (The Petrological Study on the Granitic Rocks in Kyeongju-Kampo Area)

  • 이준동
    • 암석학회지
    • /
    • 제9권2호
    • /
    • pp.70-83
    • /
    • 2000
  • 한반도 동남부 경상분지 내의 양산 단층 동부에 분포하는 경주-김포일원 4개의 소규모 화강암체에 대한 암석 기재학적 및 지화학적 특징을 밝히고, 그 기원과 상호 관계 규명에 대해 연구하였다. 야외 관찰 및 현미경 관찰에 따른 광물 함량과 조직에 근거해서 화강섬록암, 반상 화강암, 등립질 화강암의 3개 암상으로 분류하였다. 모드 분석결과에 의하면, 대본 화강암체의 북부와 남부 지역이 화강섬록암의 영역에 도시되었고 나머지는 전부 화강암 영역에 도시되었다. 본 지역의 화강암류는 비알칼리 계열 중에서도 칼크-알칼리 계열에 속한다. 희토류원소를 콘드라이트에 표준화시키면 경희토류원소가 중희토류원소보다 부화되어 있으며, 오유 화강암체와 대본 등립질 화강암체에서 가장 낮은 값을 보인다. 연구 지역의 화강암질암체 최소 용융물질의 정출 압력은 약 0.5~1 kbar이고 정출 온도는 $700~820^{\circ}C$로 추정된다. 기재적 특성과 지화학적 자료 및 동위원소 연대측정 자료들에 의하면, 오유화강암체는 팔레오세의 별개 화강암체이고 대본 화강섬록암, 산서 반상 화강암, 호암 등립질 화강암체는 에오세의 동일 기원 마그마 분화산물로 추정된다.

  • PDF

당진화력발전소의 석탄회 연안매립과 중금속 원소의 용출에 대한 생지화학적 연구 (A Biogeochemical Study on the Heavy Metal Leaching from Coal Fly Ash Disposed by Dangjin Fire Plant in the Coastal Environment)

  • 조규성;노열;정덕호
    • 한국지구과학회지
    • /
    • 제28권1호
    • /
    • pp.112-122
    • /
    • 2007
  • 석탄회는 독특한 화학조성과 광물학적 특성을 나타내는 것으로 알려져 있다. 석탄회의 철산화광물에는 중금속원소들이 다량 농집되어 있어서 침출이 일어나는 환경에서는 토양과 지하수 및 해양오염의 가능성이 높다. 본 연구에서는 해안가에 위치한 당진화력 발전소에서 배출하고 있는 석탄회와 주변 해수와의 반응과정에서 토착 미생물이 어떤 역할을 하는지를 알아보고자 하였다. 이를 위해 해수와 석탄회를 혼합하여 배양기에 60일 동안 보관하면서 물시료와 석탄회 시료를 분석함으로써 박테리아의 활동에 따른 광물의 상변화 및 해수의 지화학적 변화 정도를 살펴보았다. 매립호수에서 해수의 평균 pH는 8.97이다. 지화학적 변화 결과에 비추어 볼 때, 박테리아의 활동은 실험 시작 7일 이후부터 급격하게 활성화되었다. ${SO_4}^{2-}$는 글루코스를 첨가한 시료에서 다른 처리방식에 비해 현저하게 감소하는 경향을 나타낸다. 매립호수에 서식하는 박테리아는 주로 Mn, Fe, Zn와 반응하여 매립호수로부터 금속이온을 제거시킬 수 있을 뿐 아니라 탄산염 광물을 형성하는 과정에서 이산화탄소를 고정시킬 수 있는 역할도 할 수 있을 것으로 기대된다.

경상지역 신촌 탄산약수의 지화학적 및 동위원소 특성 (Geochemistry and Isotope Studies of the Shinchon $CO_2$ -rich Waters in the Gyeongsang Province)

  • 김건영;고용권;배대석;김천수;박맹언
    • 자원환경지질
    • /
    • 제34권1호
    • /
    • pp.71-88
    • /
    • 2001
  • 경상지역에서 산출되는 탄산약수 중 신촌약수에 대하여 지화학적 및 동위원소 연구를 수행하였다. 신촌 탄산약수는 높은 $CO_2$분압 ($10^{-0.35}$ ~$10^{0.29}$ atm) 및 높은 총용존이온함량 (835~3,144 mg/L)을 가진 전형적인 탄산수 특성을 보이며 지화학적으로는 Ca (Na)-HCO$_3$형으로 분류된다. 지화학 및 환경동위원소 분석결과는 탄산수내 이산화탄소가 심부기원임을 지시한다. 따라서 심부기원의 $CO_2$에 의해 생성된 탄산수가 다양한 물-암석 반응을 거치면서 주로 심부의 화강암과 반응에 의해 현재의 탄산수로 진화된 것으로 판단된다. 주된 물-암석 반응은 사장석과의 반응이며 방해석의 침전이 수반되면서 Ca의 용존량이 조절되어 Na의 함량이 높아진 것으로 보인다. 이처럼 탄산수의 지화학적 특성은 주로 심부의 화강암과 반응에 의한 특징을 보여주지만 높은 K 및 $SO_4$함량으로 미루어 탄산수가 지표로 상승하는 과정에서 주변모암인 퇴적암과의 반응에 의해서도 일부 영향받은 것으로 추정된다. 또한 탄산수 내 $NO_3$함량 및 삼중 수소함량은 일반 천부지하수의 혼입가능성을 지사하고 있다. 신촌지역 자연수들의 산소 및 수소 동위원소 조성은 전체적으로 지구순환수선과 평행하게 도시되어 순환수 기원으로 추정할 수 있으며, 일부 $CO_2$분압이 높은 탄산수 시료는 동위원소적으로 더 가벼운 $CO_2$가스와 동위원소적으로 재평형을 이루었음을 보여주기도 한다. 탄산수의 탄소 동위원소 조성은 전체적으로 심부기원 $CO_2$의 영역에 해당되며, 심부기원 $CO_2$영역내에서 동위원소적으로 무거운 영역에 속하는 특징을 보인다.

  • PDF

확률통계기법을 이용한 해안지역 대수층의 염수침입 평가 (Evaluation of Saltwater Intrusion to Coastal Aquifer by Using Probability Statistics)

  • 정재열;함세영;김광구;이충모;전항탁;옥순일
    • 지질공학
    • /
    • 제26권3호
    • /
    • pp.371-382
    • /
    • 2016
  • 해안지역의 염수침입은 지하수내 다양한 지화학 성분들에 의해서 탐지될 수 있다. 그러나 불충분한 지하수 자료는 염수침입의 인지를 어렵게 한다. 확률밀도함수는 제한된 수질자료를 이용하여 더 넓은 범위의 확률적 예측이 가능하며 특성화된 확률밀도 분포 도출을 통하여 해안지역의 염수침입을 효과적으로 판단할 수 있다. 본 연구에서는 부산시의 해안지역 지하수, 해안유출수, 하천수의 화학성분에 대해서 확률통계기법을 적용함으로써 염수침입을 평가하였다. 이 연구에 의해서, 해수 중에 농도가 높은 항목인 Na+, Mg2+, K+, SO42−, Cl 은 염수의 영향유무 판별의 유용한 지시자인 것으로 판명된다. 한편, 지하수, 해안유출수 및 하천수에서 유사한 확률분포형태를 보이는 항목인 Si4+, Fe2+, NO3, PO43−은 염수영향에 대한 지시자로서 적당하지 않은 것으로 판단된다.

영천 화강암지역 지하수의 지화학적 모델링 (Geochemical Modeling of Groundwater in Granitic Terrain: the Yeongcheon Area)

  • Koh, Yong-Kwon;Kim, Chun-Soo;Bae, Dae-Seok;Yun, Seong-Taek
    • 대한지하수환경학회지
    • /
    • 제5권4호
    • /
    • pp.192-202
    • /
    • 1998
  • 영천 도수터널 내 화강암 지역의 단열대를 따라 유출되는 지하수에 대하여 지화학 및 환경동위원소 연구를 수행하였다. Ca-HCO$_3$유형에 속하는 유출수의 화학 조성은 화강암을 구성하는 규산염 광물 및 열극 충진 방해석의 지화학적 용해 반응에 의해 설명되며, 그 수문지화학적 진화는 부분적 개방계에서 진행되었음을 보여준다. 환경동위원소 연구 결과, 유출수는 모두 강수 기원으로서 적어도 1953년 이전에 함양된(즉 체류 시간이 최소 45년 이상인) 지하수임을 지시해주며, 나아가 지표로부터의 거리와 단열대의 발달 상태에 따라 부분적으로 지표수의 혼입이 진행되고 있음을 지시한다. 지화학 반응 경로 모델인 CHILLER를 이용하여 본 지역 화강암 지하수의 수문지화학적 진화를 모델링 하였다. 그 결과, $Ca^{2+}$, $Na^{+}$, HCO$_3$$^{-}$ 및 pH는 규산염 광물 및 방해석의 용해 작용과 더불어 점차 증가되는 반면, $Mg^{2+}$$K^{+}$는 각각 몬트모릴로나이트와 백운모의 2차 생성과 더불어 감소됨을 보여준다. 2차 광물의 생성 순서는 적철석, 깁사이트, 카올리나이트, 몬트모릴로나이트, 백운모, 장석의 순이다. 모델링 결과는 유출수의 물리화학적 분석값과 2차 광물의 동정 결과와도 잘 일치한다. 따라서, 이러한 물-암석 상호 반응 모델링을 비교적 복잡한 암반 지하수의 수문지화학적 진화 해석에 타당성 있게 적용할 수 있음을 보여준다.

  • PDF