• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2019

In electric agricultural machine the gearbox is used to increase torque and lower the output speed of the motor shaft. The gearbox consists of several shafts, helical gears and spur gears works in series. Optimization plays an important role in gear design as reducing the weight or volume of a gear set will increase its service life and improve the bearing capacity. In this paper the basic design parameters for gear like shaft diameter and face width are considered as the input variables. The bending stress and material volume is considered as the objective function. ANSYS was used to investigate the bending stress when the variable was changed. Artificial Neural Network (ANN) was used to obtain the mathematical model of the system based on the bending stress behaviour. The ANN was used since the output system is nonlinear. The Genetic Algorithm (GA)　technique of optimization is used to obtain the optimized values of shaft diameter and face width on the pinion based on the ANN mathematical model and the results are compared as that obtained using the traditional method. The ANN and GA were performed using MATLAB. The simulation results were shown that the proposed algorithm was successfully calculated the value of shaft diameter and face width to obtain the minimal bending stress and material volume of the gearbox.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.288-295
• /
• 1998

This paper proposes a new data classification method based on the tolerant rough set that extends the existing equivalent rough set. Similarity measure between two data is described by a distance function of all constituent attributes and they are defined to be tolerant when their similarity measure exceeds a similarity threshold value. The determination of optimal similarity theshold value is very important for the accurate classification. So, we determine it optimally by using the genetic algorithm (GA), where the goal of evolution is to balance two requirements such that (1) some tolerant objects are required to be included in the same class as many as possible. After finding the optimal similarity threshold value, a tolerant set of each object is obtained and the data set is grounded into the lower and upper approximation set depending on the coincidence of their classes. We propose a two-stage classification method that all data are classified by using the lower approxi ation at the first stage and then the non-classified data at the first stage are classified again by using the rough membership functions obtained from the upper approximation set. We apply the proposed classification method to the handwritten numeral character classification. problem and compare its classification performance and learning time with those of the feed forward neural network's back propagation algorithm.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.38-41
• /
• 2004

Artificial intelligence control that use Fuzzy, Neural network, genetic algorithm etc. in the speed control of induction motor recently is studied much. Also, sensors such as Encoder and Resolver are used to receive the speed of induction motor and information of position. However, this control method or sensor use receives much effects in surroundings environment change and react sensitively to parameter change of electric motor and control Performance drops. Presume the speed and position of induction motor by ANN in this treatise, and because using FMRLC that is consisted of two Fuzzy Logic, can correct Fuzzy Rule Base through teaming and save good response special quality in change of condition such as change of parameter.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.61-67
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy based on PC in order to increase an output of the PV array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up. nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1117-1120
• /
• 2004

경제적인 공정분석과 최적화를 위해서는 컴퓨터를 이용한 플라즈마 예측모델이 요구되고 있다. 본 연구에서는 일반화된 회귀 신경망 (GRNN)을 이용하여 플라즈마 증착공정 모델을 개발한다. GRNN의 예측성능은 패턴층 뉴런의 가우시안 함수를 구성하는 학습인자, 즉 spread에 의존한다. 종래의 모델에서는 모든 가우시안 함수의 spread가 동일한 값에서 최적화되었으며, 이로 인해 모델의 예측성능을 향상시키는 데에는 한계가 있었다. 본 연구에서는 유전자 알고리즘 (GA)를 이용하여 다변수 spread를 최적화하는 기법을 개발하였으며, 그 성능을 PECVD 공정에 의해 증착된 SiN 박막의 증착률에 적용하여 평가하였다. $2^{6-1}$ 부분인자 실험계획법에 의해 수집된 데이터를 이용하여 신경망을 학습하였고, 모델적합성 점검을 위해 별도의 12번의 실험을 수행하였다. 가우시안 함수의 spread는 0.2에서 2.0까지 0.2간격으로 증가시켰으며, 최적화한 GA-GRNN모델의 예측성능은 6.6 ${\AA}/min$이었다. 이는 종래의 방식으로 최적화한 모델의 예측성능 (13.5 ${\AA}/min$)과 비교하여 50.7% 향상된 예측성능이며, 이러한 향상은 제안한 GA-GRNN 모델이 플라즈마 공정 모델의 예측성능을 증진하는데 매우 효과적임을 보여준다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1374-1375
• /
• 2008

본 논문은 3상 일괄형 GIS의 부분방전 진단을 위해 새롭게 개발한 진단 알고리즘에 관한 것이다. 진단 알고리즘 개발을 위해, 먼저 실시간 부분방전 데이터를 행벡터 및 열벡터로 구성하고 각각의 벡터에서 통계 특징량 및 질감 특징량을 추출하였다. 다음으로 이들 특징량을 GA-NN(Genetic Algorithm - Neural Network) 학습에 적용하여 진단 알고리즘을 구성하였다. 또한 진단 알고리즘의 위상독립성은 부분방전 신호의 위상변화에 관계없이 진단결과가 일치하는 것을 확인함으로써 검증하였다. 개발한 진단알고리즘의 실증 평가를 위해, 부분방전이 발생되고 있는 국내 3상 일괄형 GIS 변전소에 적용하였다. 적용 결과, 위상에 관계없이 부분방전 발생원을 정확히 진단함을 확인하였고, 이를 통해 개발 알고리즘의 우수성을 입증하였다.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.669-675
• /
• 2018

Under braking forces of a freight train, there are great longitudinal structural responses of a large freight railway cable-stayed bridge. To alleviate such adverse reactions, viscous dampers are required, whose parametric selection is one of important and arduous researches. Based on the longitudinal dynamics vehicle model, responses of a cable-stayed bridge are investigated under various cases. It shows that there is a notable effect of initial braking speeds and locations of a freight train on the structural responses. Under the most unfavorable braking condition, the parameter sensitivity analyses of viscous dampers are systematically performed. Meanwhile, a mixing method called BPNN-NSGA-II, combining the Back Propagation neural network (BPNN) and Non-Dominated Sorting Genetic Algorithm With Elitist Strategy (NSGA-II), is employed to optimize parameters of viscous dampers. The result shows that: 1. the relationships between the parameters of viscous dampers and the key longitudinal responses of the bridge are high nonlinear, which are completely different from each other; 2. the longitudinal displacement of the bridge main girder significantly decreases by the optimized viscous dampers.

• Knowledge Management Research
• /
• v.19 no.1
• /
• pp.97-118
• /
• 2018

The finance-investment industry is currently focusing on research related to artificial intelligence and big data, moving beyond conventional theories of financial engineering. However, the case of equity optimization portfolio by using an artificial intelligence, big data, and its performance is rarely realized in practice. Thus, the purpose of this study is to propose process improvements in equity selection, information analysis, and portfolio composition, and lastly an improvement in portfolio returns, with the case of an equity optimization model based on quantitative research by an artificial intelligence. This paper is an empirical study of the portfolio based on an artificial intelligence technology of "D" asset management, which is the largest domestic active-quant-fiduciary management in accordance with the purpose of this paper. This study will apply artificial intelligence to finance, analyzing financial and demand-supply information and automating factor-selection and weight of equity through machine learning based on the artificial neural network. Also, the learning the process for the composition of portfolio optimization and its performance by applying genetic algorithms to models will be documented. This study posits a model that the asset management industry can achieve, with continuous and stable excess performance, low costs and high efficiency in the process of investment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.73-73
• /
• 2011

일반적으로 미래 기후자료를 산출하기 위하여 기후 시스템을 수치화한 GCM에 의한 결과를 사용한다. 하지만 GCM의 시공간적인 해상도의 문제로 기후변화에 따른 수자원 영향 분석을 위해서는 축소기법의 적용과정이 필요하다. 이를 위하여 전세계적으로 통계학적 방법에 의한 일기발생기를 이용한 축소기법 방법이 많이 이용되고 있다. 하지만 일기발생기에 의한 방법은 월 평균값의 연간 변동성이나 계절적 변화를 재현하는데 한계가 있는 것이 사실이다. 본 연구에서는 이러한 일기 발생기의 한계가 강우의 발생 특성이 평균과 표준편차로 대표되는 통계학적 기법에 근거하고 있기 때문이라고 파악하였다. 따라서 최저온도, 최고온도, 강수량, 상대습도, 풍속, 일사량과 같이 6개의 기상자료를 선정하여 비선형 관계를 고려할 수 있는 기법을 적용하고자 하였다. 이를 위하여 SRES A1B 기후변화 시나리오에 의한 CNCM3 기후모형의 결과를 이용하였고 각 관측소 마다 다양하게 발생하는 강우 특성은 과거의 강우 특성과 유사할 것이라는 가정하에 공간적 축소기법으로 인공 신경망(ANN: Artificial Neural Network) 을 적용하고 시간적 축소기법으로 최근린(NN: Nearest Neighbor) 방법과 유전자 알고리즘(GA: Genetic Algorithm)을 적용하는 기법을 함께 제시하였다. 이러한 기법들을 실제 남한강 유역의 기상관측소 지점으로 적용하여 검증한 결과 모의된 대부분의 기상자료가 관측치를 비교적 잘 재현하였다. 본 연구에서 제시한 비선형 축소기법은 추후 기후변화 연구에 중요한 방법론으로 활용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.315-318
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy control order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.