• Journal of Hydrogen and New Energy
• /
• v.26 no.1
• /
• pp.79-87
• /
• 2015

In a gas engine, the exhaust and the engine cooling water are generated. The engine cooling water temperature is $100^{\circ}C$ and the exhaust temperature is $500^{\circ}C$. The amount of heat of engine cooling water is 43 kW and the amount of heat of exhaust is 21 kW. Eight different hybrid organic Rankine cycle (ORC) system configurations which considering different amount and temperature of waste heat are proposed for two gas engine tri-generation system and are thermodynamically analyzed. Simple system which concentrating two different waste heat on relatively low temperature engine cooling water shows highest thermal efficiency of 7.84% with pressure ratio of 3.67 and shaft power of 5.17 kW.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1143-1147
• /
• 2008

This test is performed to reduce slip/slide which are generated from VVVF inverter. when the adhesive force between wheel and rail is not ensured, slip/slide are mainly originated. In this paper, we carried out real test adopting acceleration changes to find optimized method minimizing the amount of generation of slip/slide. Through this real test, we obtained optimum result on reducing slip/slide and especially focused on decrease in slip. This method is currently applied to real train.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.111.2-111.2
• /
• 2010

One-dimensional nanostructures such as carbon nanotubes could be ideal templates for formation of metallic nanoparticles. Furthermore, bimetallic component nanoparticles have recently been interesting issues for having high catalytic activity. This work provides both a facile method to synthesize bimetallic catalysts via N atoms of carbon nanotubes and also a picture about how to design the optimal bimetallic catalyst for hydrogen generation from the hydrogen storage material. In principle, the ratio of one component to another component could be generically extended to fabricate the high-performance bimetallic catalysts on host nanostructures. Indeed, we demonstrate that the bimetallic catalyst composed of the optimum composition results in the excellent hydrogen generation property from an aqueous borane ammonia solution, thus being capable of satisfying the Depart of Energy in USA target required for many advanced applications even with the small amount of our bimetallic catalysts attached onto the N-doped carbon nanotubes. This high hydrogen generation rate is found to be attributed to the optimal distance between active Pt and cheap Ni atoms for effective hydrogen generation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.378-386
• /
• 2012

For reduction of the amount of CO2 emitted from ships, power generation characteristics of two power generation systems consisting of a high-efficiency permanent magnet synchronous generator and diode bridge rictifiers are discussed in this paper. One of the discussed systems has three-phase stator windings, and the other has two sets of three-phase (six-phase) stator windings to reduce pulsation in the electromagnetic torque and DC current. Experimental results reveal that the power generation efficiency of the system having six-phase stator windings is higher than that of the system having three-phase stator windings for a light load. The maximum power generation efficiency of the system having six-phase stator windings is almost the same as that of the system having three-phase stator windings. For the electromagnetic torque of the system having six-phase stator windings, the width of pulsation is about one-fifth compared to the system having three-phase stator windings.

• Journal of Hydrogen and New Energy
• /
• v.22 no.6
• /
• pp.913-924
• /
• 2011

A steady-state analysis has been conducted to predict the behavior of the slag layer in the entrained-flow slagging coal gasifier. The analysis takes into consideration the composition dependent slag properties such as density, viscosity, heat capacity, thermal conductivity, and temperature of critical viscosity. The amount of added flux to the design coal and the variation of syngas temperature inside the gasifier have been adopted as calculation parameters. The predicted results are the local thickness of the molten and the solid slag layers, and the slag viscosity and the velocity distribution across the molten slag layer along the gasifier wall near the slag tap.

• Journal of Information Processing Systems
• /
• v.13 no.4
• /
• pp.668-676
• /
• 2017

Recently, the importance of big data has been emphasized with the development of smartphone, web/SNS. As a result, MapReduce, which can efficiently process big data, is receiving worldwide attention because of its excellent scalability and stability. Since big data has a large amount, fast creation speed, and various properties, it is more efficient to process big data summary information than big data itself. Wavelet histogram, which is a typical data summary information generation technique, can generate optimal data summary information that does not cause loss of information of original data. Therefore, a system applying a wavelet histogram generation technique based on MapReduce has been actively studied. However, existing research has a disadvantage in that the generation speed is slow because the wavelet histogram is generated through one or more MapReduce Jobs. And there is a high possibility that the error of the data restored by the wavelet histogram becomes large. However, since the wavelet histogram generation system based on the MapReduce developed in this paper generates the wavelet histogram through one MapReduce Job, the generation speed can be greatly increased. In addition, since the wavelet histogram is generated by adjusting the error boundary specified by the user, the error of the restored data can be adjusted from the wavelet histogram. Finally, we verified the efficiency of the wavelet histogram generation system developed in this paper through performance evaluation.

• The Korean Journal of Applied Statistics
• /
• v.27 no.2
• /
• pp.211-226
• /
• 2014

This paper discusses life expectancy differentials of beneficiaries of national pension old-age benefit and benefit-cost analysis in Korea. These results are useful indicators for the assessment of retirement income security of beneficiaries and old-age benefits. This paper analyzes benefit-cost ratio, internal rate of return and generation transfer amount, using life tables by lifetime incomes. The result of the actuarial analysis for male life expectancy is approximately 21.69 to 24.63 years. The result of the actuarial analysis for female life expectancy is approximately 27.63 to 29.81 years. The result of the actuarial analysis of low income level is that the benefit-cost ratio is lower approximately 2.68 to 4.83%, the internal rate of return lower approximately 0.00 to 0.74%, the generation transfer amount lower approximately 3.00 to 5.74%, than total income level. The result of the actuarial analysis of high income level is that the benefit-cost ratio is higher approximately 2.07 to 4.98%, the internal rate of return higher approximately 0.03 to 1.73%, the generation transfer amount higher approximately 2.53 to 9.68%, than the total income level. The results by income varies due to the effect of income redistribution and life expectancy on the national pension.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.382-389
• /
• 1997

To study the optimum conditions of composing with sewage sludge, the variations of temperature and $CO_2$ generation amount during composting periods were investigated. The conditions were that sewage sludge added to bulking agents such as sawdust and rice hull were used and differently treated with microorganism seeding or not, initial C/N ratio, air flow rate and initial moisture contents. The results were summarized as follows : Seeding of 5% microorganism was higher temperature than not seeding. And using rice hull as bulking agents, and adjusting 21${\sim}$22 of initial C/N ratio, $200ml/l\;{\cdot}\;min$. of air flow rate and 64${\sim}$65% of initial moisture contents were higher temperature than any other conditions. Seeding of 5% microorganism was more $CO_2$ generation amount than not seeding. And using saw dust was more $CO_2$ generation amount than using rice hull as bulking agents. In the case of initial C/N ratio, adjusting 21${\sim}$42 was also more $CO_2$ generation amount than adjusting 12${\sim}$14. Judging from the result, it should be considered that the optimum conditions of composting with sewage sludges were seeding of 5% microorganism and adjusting 21${\sim}$22 of initial C/N ratio, $200ml/l\;{\cdot}\;min$. of air flow rate and 64${\sim}$65% of initial moisture contents.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1139-1144
• /
• 2003

This paper addresses a theoretical study to calculate the amount of the stored energy due to vacancies during high-strain-rate deformation. The study concerns the role of excess vacancies, which can play an important role to increase the amount of stored energy. Molecular dynamics simulation using a 3D model is carried out and the result clearly shows that the excess vacancies are credited to generation of the stored energy.